Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International is developing a proposed standard that will help manufacturers of automatic guided industrial vehicles evaluate their products. In addition to manufacturers, vehicle buyers will use this standard (WK48955: Test Method for Docking and Navigation for Driverless Automatic Guided Industrial Vehicles) to conduct their own tests on potential purchases. ASTM member Roger Bostelman is…, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Roger V. Bostelman, National Institute of Standards and Technology, Gaithersburg, Md., tel +1.301.975.3426; roger.bostelman@nist.gov, ASTM Staff Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #9811 ###
-
Activated carbon is processed to have small, low-volume pores that increase the surface area available for adsorption. It has applications in the medical, environmental and energy realms, among others. Since 1962, ASTM International Committee D28 on Activated Carbon has developed standards that play a pre-eminent role in how activated carbon is used. A D28 subcommittee, D28.02 on Liquid Phase…, WK47401, Xylenol Orange Dye, The xylenol orange dye test is a way to determine the relative adsorption rate of unused or reactivated carbons by adsorption of xylenol orange from aqueous solution. This is an important means for deciding which type of activated carbon to use to a specific water treatment application. “Activated carbon performance can roughly be defined as a combination of the ability to adsorb a particular…, WK47421, Particle Size Distribution, Mercury flue gas, home water filters and potable water treatment are the main applications in which powdered and fine mesh carbons are used. A proposed new test method will describe how a laser light scattering technique can determine the particle size distribution of fine mesh activated carbon. ASTM member Neal Megonnell, vice president, sales and marketing, Haycarb USA, says the proposed test…, ASTM Committee D28 Next Meeting:, April 27, April Committee Week, Anaheim, Calif., Technical Contact:, (WK47401) Adam Redding, Ph.D., Evoqua Water Technologies LLC, Northwest, Pa., tel +1.724.719.0805; adam.redding@evoqua.com and (WK47421) Neal E. Megonnell, Haycarb USA, Pittsburgh, Pa., tel +1.412.709.7487; neal@haycarbusa.com, ASTM Staff Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9731
-
Stakeholders in the field of industrial biotechnology, including representatives of the medical and pharmaceutical industries, the agricultural realm and other industries have joined together to form a new ASTM International technical committee. Following an organizational meeting on April 14, Committee E62 on Industrial Biotechnology was approved by the ASTM board of directors in June 2014. The…, ASTM Staff Contact:, Pat Picariello, Phone: 610-832-9720; ppicariello@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9604
-
ASTM International has launched a new technical committee, F45 on Driverless Automatic Guided Industrial Vehicles . After organizational meetings in October 2013 and January 2014, F45 was approved at the board of director’s recent spring meeting. In use since 1953, automated guided vehicles (AGVs) are defined by the Material Handling Institute (MHI) as “computer-controlled wheel-based load…, Technical Contact:, Roger Bostelman, National Institute of Standards and Technology, Gaithersburg, Md., roger.bostelman@nist.gov , ASTM Staff Contact:, Pat Picariello, Phone: 610-832-9720; ppicariello@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9650
-
, ASTM to Partner with ASC to Foster EPD Development, ASTM International will be collaborating with industry to develop Environmental Product Declarations (EPDs) across the 90+ industry markets they support, including sealants. The Adhesive and Sealant Council (ASC) will be partnering with ASTM International to raise awareness of this effort, educate industry on the value of Type III EPDs, and proactively engage industry in developing Product…, ASTM Staff Contact:, Tim Brooke, Phone: 610-832-9729; tbrooke@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9370
-
Sealant manufacturers will use a new ASTM International standard to evaluate new products and changes to these products due to exposure to weather. The new standard, ASTM C1735 , Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation, is under the jurisdiction of Subcommittee C24.20 on General Test Methods , part of ASTM International Committee C24 on Building…, ASTM Committee C24 Next Meeting:, Jan. 8-10, 2012, Ft. Lauderdale, Fla., Technical Contact:, Christopher C. White, Ph.D., National Institute of Standards and Technology, Gaithersburg, Md., Phone: 301-975-6016; christopher.white@nist.gov, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9005
-
Mercury emissions from flue gases in coal-fired power plants are a large source of atmospheric mercury in the United States, but no standard for determination of mercury adsorption currently exists. One promising method of controlling these emissions involves the injection of powdered activated carbon into the flue gas. A proposed new ASTM International standard would evaluate the performance of…
-
The use of rolling devices can provide a means to evaluate the adhesion of weather seals, for quality control in new installations, general evaluation of existing installations, and the investigation of water and air leakage through building enclosures. In order to better facilitate the use of rolling devices, ASTM International Committee C24 on Building Seals and Sealants is developing a…
-
ASTM International Committee C24 on Building Seals and Sealants invites interested parties to participate in the development of a proposed new standard that will use photographs to illustrate various types of sealant failures. WK11731 , Guide for Diagnosing Sealant Failure by Comparison to Reference Photographs, is under the jurisdiction of Subcommittee C24.10 on Specifications, Guides and…
-
ASTM International Committee C24 on Building Seals and Sealants is currently working to fill a need for a weatherproofing sealant field test standard. The result, proposed standard WK7800, Guide for a Non-Destructive, Continuous, Field Test of Installed Weatherproofing Sealant, features a field test that has been used by sealant professionals for years, but has not, up to this point, been…