Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375
-
, ASTM to Partner with ASC to Foster EPD Development, ASTM International will be collaborating with industry to develop Environmental Product Declarations (EPDs) across the 90+ industry markets they support, including sealants. The Adhesive and Sealant Council (ASC) will be partnering with ASTM International to raise awareness of this effort, educate industry on the value of Type III EPDs, and proactively engage industry in developing Product…, ASTM Staff Contact:, Tim Brooke, Phone: 610-832-9729; tbrooke@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9370
-
As the number of third-party accreditation bodies for road and paving materials in the United States continues to grow, a new ASTM International standard contains a set of requirements for establishing and implementing such programs. ASTM D7495 , Specification for Minimum Requirements for Accreditation Bodies That Accredit Agencies Testing and Inspecting Road and Paving Materials, was developed…, ASTM Committee D04 Next Meeting:, June 11-13, 2013, June Committee Week, Indianapolis, Ind., Technical Contact:, David Savage, CMEC, Apopka, Fla., Phone: 407-628-3682; davesavage@cmec.org, ASTM Staff Contact:, Daniel Smith, Phone: 610-832-9727; dsmith@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9340
-
A test described in a proposed new ASTM International standard will be used primarily by highway authorities to evaluate wet road skidding resistance as a means of reducing the number of automobile accidents. The proposed standard, ASTM WK40015 , Test Method for Determining the Skid Resistance of a Pavement Surface by Measuring the Sideway Force Coefficient (SFCS) Using SCRIM, is being developed…, ASTM Committee E17 Next Meeting:, June 9-12, 2013, June Committee Week, Indianapolis, Ind., Technical Contact:, Richard Dal Lago, W.D.M. Limited, Bristol, United Kingdom, Phone: 117-956-7233; richardd@wdm.co.uk, ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9314
-
Recent years have seen the introduction of new materials in the production of bituminous mixtures and liquid asphalt binders. Such materials include lime, fly ash, warm mix asphalt additives, rejuvenating agents, recycled asphalt pavement and recycled shingles. A proposed new ASTM International practice for adding these materials to bituminous mixtures and binders is being developed by ASTM…, ASTM Committee D04 Next Meeting:, Dec. 4-6, 2012, December Committee Week, Atlanta, Ga., Technical Contact:, Richard Steger, InVia Pavement Technologies LLC, Tulsa, Okla., Phone: 918-344-6418; rich@invia-tech.com, ASTM Staff Contact:, Daniel Smith, Phone: 610-832-9727; dsmith@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9270
-
Buyers and sellers of road and paving materials will be the primary users of a proposed standard being developed by Subcommittee D04.94 on Statistical Procedures and Evaluation of Data , part of ASTM International Committee D04 on Road and Paving Materials . According to James Moulthrop, senior consultant, Fugro Consultants Inc., and a D04 member, the purpose of the proposed standard, ASTM…
-
Slats inserted into chain link fences can provide up to 95 percent more privacy and enhance the aesthetic appeal of a fence. A proposed new ASTM International specification will answer the need for better standardization of these privacy slats. ASTM WK36470 , Specification for Privacy Slats for Chain Link Fence, is being developed by Subcommittee F14.40 on Chain Link Fence and Wire Accessories ,…
-
ASTM International Committee F14 on Fences welcomes participation in the development of a proposed new standard, ASTM WK36054 , Guide for Anchoring Steel Fence and Gate Posts in Lieu of Concrete Footings. The proposed standard is under the jurisdiction of Subcommittee F14.15 on Other Fence Systems and Components . According to Ray Statz, chairman, Qual Line Fence Corp., and chairman of F14.15,…
-
Continuous friction measurement equipment (CFME) used to determine skid resistance is the focus of a proposed new ASTM International standard. Interested parties are invited to participate in the development of ASTM WK34937 , Guide for Evaluation, Calibration and Correlation of Continuous Friction Measurement Equipment (CFME). The proposed standard is under the jurisdiction of Subcommittee E17.21…
-
Sealant manufacturers will use a new ASTM International standard to evaluate new products and changes to these products due to exposure to weather. The new standard, ASTM C1735 , Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation, is under the jurisdiction of Subcommittee C24.20 on General Test Methods , part of ASTM International Committee C24 on Building…, ASTM Committee C24 Next Meeting:, Jan. 8-10, 2012, Ft. Lauderdale, Fla., Technical Contact:, Christopher C. White, Ph.D., National Institute of Standards and Technology, Gaithersburg, Md., Phone: 301-975-6016; christopher.white@nist.gov, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9005