Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s committee on waste management ( D34 ) recently launched work on three proposed new standards. Anyone with an interest in waste management is invited to join the work on the following proposed standards, which are being developed by a subcommittee that focuses on treatment, recovery and reuse (D34.03). Guide for Creating Product Specific Waste Hierarchy (WK55328) This proposed…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Teresa Clark, ENSO Plastic, Mesa, Ariz., tel +1.623.242.2313; teresa.clark@ensoplastics.com, ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10213
-
ASTM International’s Committee on Particle and Spray Characterization ( E29 ) is encouraging interested parties to participate in the revision of one of its standards, E2814, Guide for Industrial Woven Wire Filter Cloth. E2814 covers the special grade of industrial woven wire cloth referred to as filter cloth, for general filtration including the separation of solids from fluids (liquids or gases…, ASTM Committee E29 on Particle and Spray Characterization Next Meeting:, April 26-27, 2017, Hollywood, Fla., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #10211
-
A new ASTM International standard supports the growing use of concrete paving slabs for commercial and residential projects. The new specification ( C1782/C1782M , Specification for Utility Segmental Concrete Paving Slabs) determines the minimum flexural strength, dimensional tolerances, and freeze-thaw durability requirements for paving slabs with dimensions ranging from 12 by 12 in. to 48 by 48…, ASTM Committee C15 on Manufacturing Masonry Units Next Meeting:, Dec. 6-8, 2016, December Committee Week, Orlando, Fla., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, David Smith, Interlocking Concrete Pavement Institute, Chantilly, Va., tel +1.703.657.6900; dsmith@icpi.org, ASTM Staff Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #10145
-
ASTM International has fully redesigned its International Laboratory Directory, the only directory in the world dedicated to helping manufacturers find the right labs to test their products. Independent laboratories throughout the world rely on thousands of standards and test methods, including many developed by ASTM International. By working with these labs, manufacturers can help ensure that…, Contact:, Anna Spektor, tel +1.610.832.9756; aspektor@astm.org, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10110
-
ASTM International’s Committee on Manufactured Masonry Units (C15) has presented its top annual award – the Award of Merit – to Steve Talafous of Buildings Consulting Group, Inc. in Minneapolis, Minn., U.S.A. The prestigious award, which includes the accompanying title of fellow, is ASTM’s highest recognition for individual contributions to developing standards. The committee honored Talafous for…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10068
-
An ASTM International committee is creating a standard to support the emergence of a geosynthetic material that is increasingly used in soil erosion protection and other construction projects. All interested parties are invited to participate in this effort (WK49719, Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending…, ASTM Committee D35 on Geosynthetics Next Meeting:, June 29-July 1, 2016, June Committee Week, Chicago, Ill., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact: John, Paulson, Dison Supply LLC, Atlanta, Ga., tel +1.770.851.6090; jnptut@aol.com , ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #10006
-
A new ASTM standard provides a quick and easy way to estimate the average size of powder particles used in a wide variety of industrial applications. The new standard ( E2980 , Test Methods for Estimating Average Particle Size of Powders Using Air Permeability) reflects advances in measurement technology that lead to better precision. According to ASTM member Frank J. Venskytis, an independent…, ASTM Committee E29 on Particle and Spray Characterization Next Meeting:, April 27-28, 2016 Hollywood, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Frank J. Venskytis, Clayton, N.C., tel +1.919.553.8050; frankvenskytis@gmail.com, ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #9965
-
A new ASTM International standard, ASTM E2872 , Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus, will be used to guide the characterization of nozzles and atomizers using laser diffraction instruments. ASTM E2872 is primarily applicable to aerial agricultural spraying, aerial forest sprays and air-blast…, ASTM Committee E29 Next Meeting:, Oct. 6-7, 2014, October Committee Week, New Orleans, La., Technical Contact:, Gordon Holloway Ph.D., University of New Brunswick, Fredericton, New Brunswick, Canada; Phone: 506-447-3108; holloway@unb.ca, ASTM Staff Contact:, Katerina Koperna, Phone: 610-832-9728; kkoperna@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9592
-
A large and diverse set of manufactured materials are in powdered form at one stage or another. No matter what the material is, from cement to metered dose inhaler ingredients, product performance is related to particle size distribution. “The strength of concrete is related to the fineness of the cement powder used, but the danger with very fine grades is excessive heating on setting,” says…, ASTM Committee E29 Next Meeting:, Oct. 6-7, 2014, October Committee Week, New Orleans, La., Technical Contact:, Alan F. Rawle, Ph.D., Malvern Instruments, Westborough, Mass., Phone: 508-768-6434; alan.rawle@malvern.com , ASTM Staff Contact:, Katerina Koperna, Phone: 610-832-9728; kkoperna@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9576
-
Bisphenol A, or BPA, is a high production volume chemical widely used in manufacturing polycarbonate plastics and epoxy resins that are used in many industries. Procedures described in a new ASTM International standard will be used for measuring BPA concentration in environmental media such as soils, sludges and biosolids. The new standard, ASTM D7858 , Test Method for Determination of Bisphenol…, ASTM Committee D34 Next Meeting:, Virtual meeting, Oct. 10-11, 2013, Technical Contact:, Lawrence Zintek, Ph.D., U.S. Environmental Protection Agency, Region 5 Chicago Regional Laboratory, Chicago, Ill., Phone: 312-886-2925; zintek.lawrence@epa.gov, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9456