Search
Advanced search
Filter by category
Filter by committee
Search results
-
Since the late 1970s, precast box sections have become an important component in the construction of culverts, storm drains and sewers, but there has not been a comprehensive standard for the installation of such sections. A new ASTM International standard fills this gap. ASTM C1675, Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains and…, Technical Contact:, Roman Selig, Hamilton Kent LLC, Birmingham, Ala., Phone: 205-910-0690; roman.selig@hamiltonkent.com, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9243
-
Load and resistance factor design methodology developed by the American Association of State Highway and Transportation Officials plays a key role in a proposed ASTM standard on the design of culverts and storm drains. ASTM WK38166 , Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains Designed According to AASHTO LRFD, is being…, Technical Contact:, Balaram K. Singh, P.E., Michigan Department of Transportation, Lansing, Mich., Phone: 517-335-2174; singhb@michigan.gov, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact, : Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9311
-
Taking into account the particular needs of people with disabilities is an important aspect of planning for a possible disaster and the aftermath of such an event. A proposed new ASTM International standard will provide planning guidance for helping those with disabilities in a disaster or emergency situation. The proposed new standard, ASTM WK37628 , Guide for Preparing for the Impact of…
-
Physical barrier systems are an important component in protecting high security assets, and the demand for barrier products has intensified. The capability and integrity of these systems must be verified through testing, and ensured through manufacturing and installation compliance with minimum standard requirements for compatibility with tested designs. In order to facilitate this compliance…
-
Sealant manufacturers will use a new ASTM International standard to evaluate new products and changes to these products due to exposure to weather. The new standard, ASTM C1735 , Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation, is under the jurisdiction of Subcommittee C24.20 on General Test Methods , part of ASTM International Committee C24 on Building…, ASTM Committee C24 Next Meeting:, Jan. 8-10, 2012, Ft. Lauderdale, Fla., Technical Contact:, Christopher C. White, Ph.D., National Institute of Standards and Technology, Gaithersburg, Md., Phone: 301-975-6016; christopher.white@nist.gov, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9005
-
Meeting to Establish Task Group to Be Held August 10 A meeting will be held on Aug. 10, 2011, to establish a task group within ASTM Committee E54 on Homeland Security Applications to complete the drafting of two performance standards for chemical vapor detectors in support of the U.S. Department of Homeland Security’s Science and Technology Directorate. The work items for the two proposed new…
-
ASTM International Committee E54 on Homeland Security Applications has developed a new single-laboratory validated standard, ASTM E2787 , Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS). The new standard was developed by Subcommittee E54.03 on Decontamination…, ASTM Committee E54 Next Meeting:, Jan. 30 - Feb. 1, 2012, January Committee Week, Atlanta, GA, Technical Contact:, Lawrence Zintek, U.S. EPA Region 5 Chicago Regional Laboratory, Chicago, Ill., Phone: 312-886-2925; zintek.lawrence@epa.gov, ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8897
-
ASTM International Committee E54 on Homeland Security Applications is currently developing a series of proposed standards on emergency operations centers. The first of these standards, ASTM E2668 , Guide for Emergency Operations Center (EOC) Development, has now been approved. ASTM E2668 is under the jurisdiction of Subcommittee E54.02 on Emergency Preparedness Training and Procedures. “ASTM…, ASTM Committee E54 Next Meeting:, June 13-15, June Committee Week, Anaheim, Calif., Technical Contact:, (E2668) Glenn Wisbey, North Carolina Division of Emergency Management, Raleigh, N.C., Phone: 919-715-8577; gwisbey@ncem.org ; (WK32133) Lucien Canton, Lucien Canton LLC, San Francisco, Calif., Phone: 415-221-2562; lcanton@pacbell.net ; (proposed operations standard) Frank Kriz, Lighthouse Readiness Group, Phoenix, Ariz., Phone: 602-319-1446; krizassoc@aol.com, ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8858
-
Dental dams are rectangular sheets of latex used to isolate specific teeth during dental procedures. Testing laboratories, as well as manufacturers of dental dams, exercise bands, rubber bands and tourniquets will be the primary users of a proposed new ASTM standard on dental dams. ASTM WK28312 , Test Method for Quantitation of Powder on Dental Dams, is currently being developed by Subcommittee…, ASTM Committee D11 Next Meeting:, June 13-16, 2011, June Committee Week, Anaheim, Calif., Technical Contact:, Kelly Horton, LEAP Testing Service, Sayre, Pa., Phone: 570-882-4645; horton_kelly@guthrie.org, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8755
-
Laura Koss of Federal Trade Commission to Provide FTC Perspective, ASTM International Committee D13 on Textiles will sponsor a workshop, The Textile Industry and the Green Challenge: A Federal Trade Commission Perspective, on Tuesday Jan. 31, 2011, from Noon-1:30 p.m. EDT. The workshop will take place during the D13 standards development meetings, which will be held Jan. 30-Feb. 2 at the Baltimore Marriott Waterfront in Baltimore, Md. The workshop will provide a…, ASTM Committee D13 Next Meeting:, Jan. 30-Feb. 2, 2011, January Committee Week, Baltimore, Md., Technical Contact:, Vincent Diaz, Atlantic Thread & Supply Co., Baltimore, Md., Phone: 410-687-9424; vince@atlanticthread.com, ASTM Staff Contact:, Jennifer Rogers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8756