Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International, the American Society for Composites, Syracuse University, the University of Utah, and the National Institute of Aerospace will jointly support the 31st Annual Technical Conference of the American Society for Composites (Sept. 19-21) and the ASTM Committee on Composite Materials (D30) meeting (Sept. 21-22). Both events will be in Williamsburg, Virginia. Information on the…, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Ronald Krueger, National Institute of Aerospace, Hampton, Va., tel +1.757.864.3482; rkrueger@nianet.org , ASTM Staff Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #9969
-
Maybe you haven’t given much thought to the growth of interlaminar cracks, or cracks in between layers, in laminated composite materials. Perhaps you should though, because such materials are everywhere and interlaminar cracks can cause serious damage to many types of structures and products, from sports equipment to spacecraft. This is why a new ASTM standard, D7905/D7905M , Test Method for…, Technical Contact:, Barry D. Davidson, Ph.D. Syracuse University, Syracuse, N.Y., tel +1.315.443.4201; bddavids@syr.edu, ASTM Staff Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9724
-
An important ASTM engine coolant standard, ASTM D3321 , Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants, has recently been revised to reflect advances in engine coolant technology used in modern engines. ASTM D3321 is under the jurisdiction of Subcommittee D15.03 on Physical Properties , part of ASTM International Committee…, ASTM Committee D15 Next Meeting:, May 21-22, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Frederick C. Alverson, Shell Global Solutions, Houston, Texas, Phone: 281-544-9217; frederick.alverson@shell.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9274
-
A new ASTM International standard fills an industry need for damage resistance testing of sandwich constructions, a common composite structural configuration. ASTM D7766/D7766M , Practice for Damage Resistance Testing of Sandwich Constructions, was developed by Subcommittee D30.09 on Sandwich Construction , part of ASTM International Committee D30 on Composite Materials . “ASTM D7766/D7766M will…, Technical Contact:, Adam J. Sawicki, Boeing Co., Philadelphia, Pa., Phone: 610-591-2807; adam.j.sawicki@boeing.com, ASTM Staff Contact:, Ashley Wiand, Phone: 610-832-9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9195
-
A new ASTM International standard will answer industry’s need for determination of fatigue properties of open-hole composite laminates. ASTM D7615/D7615M , Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates, was developed by Subcommittee D30.05 on Structural Test Methods , part of ASTM International Committee D30 on Composite Materials . The purpose of ASTM D7615/D7615M…, ASTM Committee D30 Next Meeting:, Oct. 17-19, 2011, in conjunction with the Society for the Advancement of Material and Process Engineering, Fort Worth, Texas, Technical Contact:, Mark Chris, Bell Helicopter Textron, Inc., Dallas, Texas, Phone: 817-280-872; mchris@bellhelicopter.textron.com, ASTM Staff Contact:, Ashley Wiand, Phone: 610-832-9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8914
-
ASTM International Committee D15 on Engine Coolants has formed three new subcommittees: Subcommittees D15.22 on Non-Aqueous Coolants ; D15.25 on Diesel Exhaust Fluid ; and D15.30 on Industrial Heat Transfer Fluids . All interested parties are invited to join in the standards developing activities of these new subcommittees., D15.22, Non-Aqueous Coolants, While there has been an increased interest in non-aqueous coolants industry, there are no current ASTM standards in this area. D15.22 will begin to develop such standards. “The envisioned standards for non-aqueous coolants would be performance standards, rather than ingredient standards, to allow for formulations that are not currently proprietary,” says Jonathan T. Light, chief engineer, Evans…, D15.25, Diesel Exhaust Fluid, Diesel exhaust fluid, often referred to as DEF, is required by many diesel engine-powered vehicles delivered after January 2010. More recent environmental standards issued by the U.S. Environmental Protection Agency have created more stringent emissions standards for agricultural, construction and forestry equipment. DEF is used to reduce nitrogen oxide emissions, which allows original equipment…, D15.30, Industrial Heat Transfer Fluids, Members of D15 recognized that changes in the antifreeze industry, including new manufacturing technologies, improved inhibitor chemistries and recycling technologies, would likely be adapted to the facilities industry as a natural course of innovation. Because D15 has experience developing standards that are technically similar to the facilities heat transfer industry, it was deemed appropriate…, ASTM Committee D15 Next Meeting:, May 17-18, May Committee Week, Anaheim, Calif., Technical Contact:, (D15.22) Jonathan T. Light, Evans Cooling Systems Inc., Sharon, Conn., Phone: 860-435-2418; jtlight@comcast.net ; (D15.25) Edward Eaton Sr., Amalgatech, Phoenix, Ariz., Phone: 602-252-0280; edeaton@amalgatech.com ; (D15.30) John Panasewicz, Clear Choice Antifreeze, Henderson, Colo., Phone: 303-227-9900; johnp@clearchoiceantifreeze.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8837
-
ASTM International Committee D30 on Composite Materials is currently developing a proposed new standard, ASTM WK30231 , Practice for Damage Resistance Testing of Sandwich Constructions, which will be the first industry standard to cover this topic. “Committee D30 has published standards for damage resistance testing of composite laminates, namely ASTM D6264 and ASTM D7136, but does not have…, ASTM Committee D30 Next Meeting:, March 2-4, 2011, in conjunction with CMH17, Kansas City, Mo., Technical Contac, t: Adam Sawicki, Boeing Co., Philadelphia, Pa., Phone: 610-591-2807; adam.j.sawicki@boeing.com, ASTM Staff Contact:, Ashley Wiand, Phone: 610-832-9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8775
-
A series of proposed new standards being developed by ASTM International Committee D15 on Engine Coolants would remove technical barriers that currently prevent the cost-effective replacement of ethylene glycol with more environmentally friendly glycerin in antifreeze. The proposed standards are under the jurisdiction of Subcommittee D15.93 on Research and Long Range Planning. Natural glycerin is…
-
Subcommittee D30.05 on Structural Test Methods has been developing a series of standards addressing polymer reinforced composite materials used in the repair and reinforcement of concrete buildings and other civil structures. The latest approved standard in this series addresses the tension testing of materials that are externally bonded to concrete and other structural materials for repair,…
-
A newly approved ASTM International standard will advance the cause of architectural preservation. The new standard, ASTM C1713 , Specification for Mortars for the Repair of Historic Masonry, was developed by Subcommittee C12.03 on Specifications for Mortars, part of ASTM International Committee C12 on Mortars and Grouts for Masonry Units. John Wathne, structural engineer and president of…