Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International test method that provides standardization for a long-used test will aid in the use and evolution of geotextile bag technology. The new standard, ASTM D7701 , Test Method for Determining the Flow Rate of Water and Suspended Soils from a Geotextile Bag, was developed by Subcommittee D35.03 on Permeability and Filtration , part of ASTM International Committee D35 on…
-
Continuous friction measurement equipment (CFME) used to determine skid resistance is the focus of a proposed new ASTM International standard. Interested parties are invited to participate in the development of ASTM WK34937 , Guide for Evaluation, Calibration and Correlation of Continuous Friction Measurement Equipment (CFME). The proposed standard is under the jurisdiction of Subcommittee E17.21…
-
A new ASTM International practice standardizes a geoelectric method used to detect potential leaks in exposed electrically isolating membranes in the field in containment applications. The new standard, ASTM D7703 , Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance System, is under the jurisdiction of Subcommittee D35.10 on Geomembranes , part of ASTM…, ASTM Committee D35 Next Meeting:, Feb. 1-3, 2012, January Committee Week, Atlanta, Ga., Technical Contact:, Tim Bauters, Ph.D., Golder Associates Inc., Sunnyvale, Calif., Phone: 408-220-9223; tim_bauters@golder.com, ASTM Staff Contact:, Christine Sierk, Phone: 610-832-9728; csierk@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9007
-
Interlocking concrete pavements are extensively used in low-speed urban and rural roads throughout Europe and are seeing increased use as an alternative to asphalt and cast-in-place concrete in the United States. A proposed new ASTM International standard will address the management by city and county transportation agencies of roads made from interlocking concrete pavements. The proposed new…, ASTM Committee E17 Next Meeting:, June 5-6, 2011, State College, Pa., Technical Contact:, David R. Smith, Interlocking Concrete Pavement Institute, Herndon, Va., Phone: 703-657-6900, ext. 201; dsmith@icpi.org, ASTM Staff Contact:, Daniel Smith, Phone: 610-832-9727; dsmith@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8857
-
Traffic monitoring is a means of counting and classifying vehicles and measuring vehicle flow characteristics, such as vehicle speed, lane occupancy, turning movements and other items typically used to portray traffic movement. In order for traffic monitoring data to be assessed properly, information on how the data were collected, edited, summarized and reported must be provided. This obligation…
-
Several years ago, a housing boom followed by recovery from damage caused by Hurricane Katrina and other storms created a surge in the use of imported drywall in the United States, particularly in the southeastern area of the country. However, since then, there have been a number of complaints concerning corrosion and odors in homes in which some of this drywall was used. Interim guidance…
-
Two new ASTM International standards will aid in the recent national movement to develop a mechanistic-empirical design guide for pavements. The new standards, developed by ASTM International Committee D35 on Geosynthetics, will each cover quantification of fundamental material properties for pavement components. The standards, ASTM D7499 , Test Method for Measuring Geosynthetic-Soil Resilient…, ASTM Committee D35 Next Meeting:, Feb 2-4, 2011, January Committee Week, Baltimore, Md., Technical Contact:, Eli Cuelho, Western Transportation Institute, Montana State University, Bozeman, Mont.; Phone: 406-994-7886; elic@coe.montana.edu, ASTM Staff Contact:, Christine Basile, Phone: 610-832-9728, cbasile@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8605
-
Since the appearance of the first California-type models around 1940, the profilograph has been a popular device used for quality control in the construction of pavements. Both roadway and airfield landing agencies have adopted roughness indexes computed from profilograph-derived measurements as a level of construction quality. Emerging high-speed inertial profilers can now quickly collect…
-
With heightened interest in issues involving corrosive gypsum board, the first draft of a proposed new standard on the subject, ASTM WK26072 , Practice for Evaluation of Buildings to Identify Corrosive Gypsum Board, was reviewed and edited at a task group meeting on Nov. 10 in Atlanta, Ga. The proposed new standard is under the jurisdiction of ASTM Subcommittee C11.01 on Specifications and Test…, ASTM Committee C11 Next Meeting:, May 17-19, 2010, St. Louis, Mo., Technical Contact:, Spiderman Mulholland, U.S. Building Consultants Inc., Gainesville, Fla., Phone: 352-505-6771; spiderman@usbcinc.com, ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8414/Nov2009
-
At an ASTM International meeting held on Oct. 20 it was decided to initiate the formulation of a proposed new ASTM standard that will cover issues relating to drywall and indoor air quality. Representatives from various ASTM International committees, including C11 on Gypsum and Related Building Materials and Systems and E06 on Performance of Buildings attended the meeting, which was held during…