Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s standard for drywall ( C1396/C1396M-14a, Specification for Gypsum Board ) was cited in the United States Federal Register on Jan. 23, 2015. This fulfilled a goal of the Drywall Safety Act of 2012 to create a standard for limited sulfur content in drywall. Specifically, the Consumer Product Safety Commission determined that C1396 is accepted as “a voluntary standard for…, ASTM Staff Contact:, Thomas O’Toole, tel +1.610.832.9739; totoole@astm.org, ASTM PR Contact:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org Release #9769
-
A new ASTM International standard ( F2697 , Test Methods for Physical Assault on Overhead Horizontal Fixed Barriers for Detention and Correctional Facilities) will help ensure that the ceilings of rooms in correctional facilities can withstand breakthrough attempts. The standard aims to promote the safety and security of facility staff, facility residents and the general public. This is the…, Technical Contact:, James A. Stapleton Jr., P.E., Habersham Metal Products Co., tel +1.706.778.2212, ext. 202; jas@habershammetal.com, ASTM Staff Contact:, Joseph Hugo, tel +1.610.832.9740; jhugo@astm.org, ASTM PR Contact:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org Release #9770
-
Knowing that the floor beneath you is safe is something most of us take for granted. A proposed new ASTM International standard will help people who have to think about, and test for, floor safety all the time. The proposed new standard is ASTM WK47030 , Practice for Evaluating Concrete Floor Systems to Receive Resilient Flooring. The World Floor Covering Association and the Floor Covering…, ASTM Committee F06 Next Meeting:, Nov. 12-13, November Committee Week, New Orleans, La., Technical Contact:, George Donnelly, George Donnelly Testing and Inspections, Hot Springs, Ark., tel +1.501.915.0626; info@moisturetesting.com, ASTM Staff Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9706
-
Fiber-reinforced polymers are used to strengthen concrete, wood and steel structures above and below ground as well as under water. Two proposed new ASTM International standards will provide an approach to quality control inspection and reporting for fiber-reinforced polymers in all industries. The proposed new standards are: ASTM WK46050, Guide for the Inspection of Bond Critical FRP…, Next Committee D33 Meeting:, Jan. 15-16, 2015, in conjunction with Electric Power Research Institute/Nuclear Utility Coatings Council meetings, Orlando, Fla., Technical Contact:, Ramon Pelaez, Greenman Pedersen Inc., Southbridge, Mass., Phone: 508-612-5769; rpelaez@gpinet.com, ASTM Staff Contact:, Joseph Hugo, Phone: 610-832-9740; jhugo@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9624
-
Two new nonmetallic plaster base standards have been approved by ASTM International Committee C11 on Gypsum and Related Building Materials and Systems . Metallic and nonmetallic plaster bases, also known as lath, are used as reinforcement and to serve as an attachment mechanism for portland cement based plaster or stucco. While standards exist for metal lath, there had not been standards for…, ASTM Committee C11 Next Meeting:, Nov. 10-13, 2014, November Committee Week, New Orleans, La., Technical Contact:, Bill Egan, BASF Corp., Jacksonville, Fla., Phone: 904-996-6115; bill.egan@basf.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9653
-
All interested parties are invited to join in the development of a proposed new ASTM International standard that would be used during the design and installation of suspended gypsum ceiling systems for commercial construction. ASTM WK44242 , Practice for Installation of Metal Suspension Ceiling Systems for Gypsum Board Applications, is being developed by Subcommittee C11.03 on Specifications for…, ASTM Committee C11 Next Meeting:, May 5-8, 2014, May Committee Week, Toronto, Ontario, Canada, Technical Contact:, Joseph J. Kelly, Worthington Armstrong Venture, Malvern, Pa., Phone: 610-722-1218; jjkelly@armstrong.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9576
-
For more than 100 years, cork tile has been commonly used as a floor and wall covering for residential and commercial use. A new ASTM International standard, ASTM F3008 , Specification for Cork Floor Tile, specifies requirements for cork floor coverings made from agglomerated composition cork supplied in tile form, which is designed to be used with a factory finish or an in situ finish, or both.…, ASTM Committee F06 Next Meeting:, May 7-8, 2014, Clearwater, Fla., Technical Contact:, Christopher Capobianco, Spartan Surfaces, Patchogue, N.Y., Phone: 631-275-6494; christopher@spartansurfaces.com, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9523
-
ASTM C1264 Addresses Origin and Source Labeling of Drywall and Other Gypsum Products, In response to the importation of contaminated drywall that caused health and safety hazards when used in home construction, the Drywall Safety Act of 2012 (PL 112-266) was signed into law by President Barack Obama on Jan. 14, 2013. The new law cites ASTM International standard C1264-11 , Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling and…, Labeling, The Drywall Safety Act requires the CPSC to set regulations based on C1264 , which was developed by ASTM Subcommittee C11.01 on Specifications and Test Methods for Gypsum Products , part of ASTM Committee C11 on Gypsum and Related Building Materials and Systems . The standard provides the CPSC, states, suppliers and consumers with an effective tool for supply chain communication by specifying…, Up-to-Date Standards, Under the act’s provisions, ASTM International will notify the CPSC of any updates to the labeling standard within 60 days; the CPSC will then have 90 days to disapprove ASTM’s recommended changes. If the CPSC accepts the most updated version of the ASTM standard, then the new version becomes effective 180 days after ASTM’s initial notification., Sulfur Content, Because sulfur content levels in drywall have been associated with elevated corrosion rates in a home, the act requires that the CPSC issue a regulation that limits the sulfur content for drywall manufactured in the United States or imported from abroad. In lieu of issuing a federal rule, the CPSC may adopt a voluntary consensus standard, developed by C11.01, that addresses the level of sulfur…, ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9277
-
A recently published ASTM International standard covers a new type of resilient flooring tile product based on a polyester binder. ASTM F2982 , Specification for Polyester Composition Floor Tile, was developed by Subcommittee F06.80 on Specifications , part of ASTM International Committee F06 on Resilient Floor Coverings . “ ASTM F2982 sets forth an explicit set of compositional and performance…, ASTM Committee F06 Next Meeting:, May 22-23, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Thomas Erisman, Armstrong World Industries, Lancaster, Pa., Phone: 717-396-5354; tcerisman@armstrong.com, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9271
-
While the quality of coating materials for buried pipe at nuclear power plants has evolved over time, there is currently no written standard that would allow plants to fully take advantage of advances in coating technology. A proposed new standard will provide coating guidance for plants seeking to repair or replace buried pipe. The proposed standard, ASTM WK36282 , Guide for Selection of Coating…