Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s standard for drywall ( C1396/C1396M-14a, Specification for Gypsum Board ) was cited in the United States Federal Register on Jan. 23, 2015. This fulfilled a goal of the Drywall Safety Act of 2012 to create a standard for limited sulfur content in drywall. Specifically, the Consumer Product Safety Commission determined that C1396 is accepted as “a voluntary standard for…, ASTM Staff Contact:, Thomas O’Toole, tel +1.610.832.9739; totoole@astm.org, ASTM PR Contact:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org Release #9769
-
Maybe you haven’t given much thought to the growth of interlaminar cracks, or cracks in between layers, in laminated composite materials. Perhaps you should though, because such materials are everywhere and interlaminar cracks can cause serious damage to many types of structures and products, from sports equipment to spacecraft. This is why a new ASTM standard, D7905/D7905M , Test Method for…, Technical Contact:, Barry D. Davidson, Ph.D. Syracuse University, Syracuse, N.Y., tel +1.315.443.4201; bddavids@syr.edu, ASTM Staff Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9724
-
Two new nonmetallic plaster base standards have been approved by ASTM International Committee C11 on Gypsum and Related Building Materials and Systems . Metallic and nonmetallic plaster bases, also known as lath, are used as reinforcement and to serve as an attachment mechanism for portland cement based plaster or stucco. While standards exist for metal lath, there had not been standards for…, ASTM Committee C11 Next Meeting:, Nov. 10-13, 2014, November Committee Week, New Orleans, La., Technical Contact:, Bill Egan, BASF Corp., Jacksonville, Fla., Phone: 904-996-6115; bill.egan@basf.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9653
-
All interested parties are invited to join in the development of a proposed new ASTM International standard that would be used during the design and installation of suspended gypsum ceiling systems for commercial construction. ASTM WK44242 , Practice for Installation of Metal Suspension Ceiling Systems for Gypsum Board Applications, is being developed by Subcommittee C11.03 on Specifications for…, ASTM Committee C11 Next Meeting:, May 5-8, 2014, May Committee Week, Toronto, Ontario, Canada, Technical Contact:, Joseph J. Kelly, Worthington Armstrong Venture, Malvern, Pa., Phone: 610-722-1218; jjkelly@armstrong.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9576
-
ASTM C1264 Addresses Origin and Source Labeling of Drywall and Other Gypsum Products, In response to the importation of contaminated drywall that caused health and safety hazards when used in home construction, the Drywall Safety Act of 2012 (PL 112-266) was signed into law by President Barack Obama on Jan. 14, 2013. The new law cites ASTM International standard C1264-11 , Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling and…, Labeling, The Drywall Safety Act requires the CPSC to set regulations based on C1264 , which was developed by ASTM Subcommittee C11.01 on Specifications and Test Methods for Gypsum Products , part of ASTM Committee C11 on Gypsum and Related Building Materials and Systems . The standard provides the CPSC, states, suppliers and consumers with an effective tool for supply chain communication by specifying…, Up-to-Date Standards, Under the act’s provisions, ASTM International will notify the CPSC of any updates to the labeling standard within 60 days; the CPSC will then have 90 days to disapprove ASTM’s recommended changes. If the CPSC accepts the most updated version of the ASTM standard, then the new version becomes effective 180 days after ASTM’s initial notification., Sulfur Content, Because sulfur content levels in drywall have been associated with elevated corrosion rates in a home, the act requires that the CPSC issue a regulation that limits the sulfur content for drywall manufactured in the United States or imported from abroad. In lieu of issuing a federal rule, the CPSC may adopt a voluntary consensus standard, developed by C11.01, that addresses the level of sulfur…, ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9277
-
Coated fabric products used for oil spill response procedures can deteriorate when stored for long periods of time. A proposed new ASTM standard will provide a nondestructive test for stored equipment to be evaluated for continued suitability over time. ASTM WK37298 , Test Method for Determining Storage Life of Coated Fabric Products, is being developed by Subcommittee F20.11 on Control , part of…, ASTM Committee F20 Next Meeting:, Oct. 23-24, 2012, October Committee Week, Atlanta, Ga., Technical Contact:, Peter Lane, Applied Fabric Technologies Inc., Applied Fabric Technologies Inc., Morris Skimmers International LLC, Orchard Park, N.Y., Phone: 716-662-0632; lane@afti.com, ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9310
-
ASTM International Committee F20 on Hazardous Substances and Oil Spill Response has approved several standards for in-situ burning. The latest proposed standard on this subject, ASTM WK37324 , Guide for Evaluation of In-Situ Burning Effectiveness, is currently being developed by Subcommittee F20.15 on In-Situ Burning . In-situ burning is a controlled burning, at the spill location, of oil that…, ASTM Committee F20 Next Meeting:, Oct. 23-24, 2012, October Committee Week, Atlanta, Ga., Technical Contact:, Steve Potter, SL Ross Environmental Research Ltd., Ottawa, Ontario, Canada, Phone: 613-232-1564; steve@slross.com, ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-932-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9294
-
A new ASTM International standard fills an industry need for damage resistance testing of sandwich constructions, a common composite structural configuration. ASTM D7766/D7766M , Practice for Damage Resistance Testing of Sandwich Constructions, was developed by Subcommittee D30.09 on Sandwich Construction , part of ASTM International Committee D30 on Composite Materials . “ASTM D7766/D7766M will…, Technical Contact:, Adam J. Sawicki, Boeing Co., Philadelphia, Pa., Phone: 610-591-2807; adam.j.sawicki@boeing.com, ASTM Staff Contact:, Ashley Wiand, Phone: 610-832-9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9195
-
A new ASTM International standard will be a useful document for vendors, buyers and regulators in determining the applicability of different types of booms to be used for oil spill response. ASTM F2683 , Guide for Selection of Booms for Oil Spill Response, was developed by Subcommittee F20.11 on Control , part of ASTM International Committee F20 on Hazardous Substances and Oil Spill Response .…
-
A new ASTM International standard will answer industry’s need for determination of fatigue properties of open-hole composite laminates. ASTM D7615/D7615M , Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates, was developed by Subcommittee D30.05 on Structural Test Methods , part of ASTM International Committee D30 on Composite Materials . The purpose of ASTM D7615/D7615M…, ASTM Committee D30 Next Meeting:, Oct. 17-19, 2011, in conjunction with the Society for the Advancement of Material and Process Engineering, Fort Worth, Texas, Technical Contact:, Mark Chris, Bell Helicopter Textron, Inc., Dallas, Texas, Phone: 817-280-872; mchris@bellhelicopter.textron.com, ASTM Staff Contact:, Ashley Wiand, Phone: 610-832-9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8914