Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s standard for drywall ( C1396/C1396M-14a, Specification for Gypsum Board ) was cited in the United States Federal Register on Jan. 23, 2015. This fulfilled a goal of the Drywall Safety Act of 2012 to create a standard for limited sulfur content in drywall. Specifically, the Consumer Product Safety Commission determined that C1396 is accepted as “a voluntary standard for…, ASTM Staff Contact:, Thomas O’Toole, tel +1.610.832.9739; totoole@astm.org, ASTM PR Contact:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org Release #9769
-
Solid, round, fine wire is often used by the medical industry in devices such as catheter guide wires, stents for the repair of arteries and containment vessels such as vena cava filters. A new ASTM International standard, ASTM E2948 , Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire, will be used to determine the fatigue life characteristics of such wire in…, ASTM Committee E08 Next Meeting:, Nov. 10-13, 2014, November Committee Week, New Orleans, La., Technical Contact:, K.L. Jerina, Washington University, St. Louis, Mo., Phone: 314-935-4960; jerinak@seas.wustl.edu ; and M.R. Mitchell, Mechanics and Materials Consulting LLC, Flagstaff, Ariz., mrmitchell@illinoisalumni.org , ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9613
-
Two new nonmetallic plaster base standards have been approved by ASTM International Committee C11 on Gypsum and Related Building Materials and Systems . Metallic and nonmetallic plaster bases, also known as lath, are used as reinforcement and to serve as an attachment mechanism for portland cement based plaster or stucco. While standards exist for metal lath, there had not been standards for…, ASTM Committee C11 Next Meeting:, Nov. 10-13, 2014, November Committee Week, New Orleans, La., Technical Contact:, Bill Egan, BASF Corp., Jacksonville, Fla., Phone: 904-996-6115; bill.egan@basf.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9653
-
All interested parties are invited to join in the development of a proposed new ASTM International standard that would be used during the design and installation of suspended gypsum ceiling systems for commercial construction. ASTM WK44242 , Practice for Installation of Metal Suspension Ceiling Systems for Gypsum Board Applications, is being developed by Subcommittee C11.03 on Specifications for…, ASTM Committee C11 Next Meeting:, May 5-8, 2014, May Committee Week, Toronto, Ontario, Canada, Technical Contact:, Joseph J. Kelly, Worthington Armstrong Venture, Malvern, Pa., Phone: 610-722-1218; jjkelly@armstrong.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9576
-
A new ASTM International standard will enable fracture toughness testing on defects that are directly analogous to those commonly found in structural applications. ASTM E2899 , Test Method for Measurement of Initiation Toughness in Surface Cracks under Tension and Bending, was developed by Subcommittee E08.07 on Fracture Mechanics , part of ASTM International Committee E08 on Fatigue and Fracture…, ASTM Committee E08 Next Meeting:, Nov. 11-14, 2013, November Committee Week, Jacksonville, Fla., Technical Contact:, Douglas N. Wells, NASA-MSFC, Huntsville, Ala., Phone: 256-544-3300; douglas.n.wells@nasa.gov, ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9507
-
ASTM C1264 Addresses Origin and Source Labeling of Drywall and Other Gypsum Products, In response to the importation of contaminated drywall that caused health and safety hazards when used in home construction, the Drywall Safety Act of 2012 (PL 112-266) was signed into law by President Barack Obama on Jan. 14, 2013. The new law cites ASTM International standard C1264-11 , Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling and…, Labeling, The Drywall Safety Act requires the CPSC to set regulations based on C1264 , which was developed by ASTM Subcommittee C11.01 on Specifications and Test Methods for Gypsum Products , part of ASTM Committee C11 on Gypsum and Related Building Materials and Systems . The standard provides the CPSC, states, suppliers and consumers with an effective tool for supply chain communication by specifying…, Up-to-Date Standards, Under the act’s provisions, ASTM International will notify the CPSC of any updates to the labeling standard within 60 days; the CPSC will then have 90 days to disapprove ASTM’s recommended changes. If the CPSC accepts the most updated version of the ASTM standard, then the new version becomes effective 180 days after ASTM’s initial notification., Sulfur Content, Because sulfur content levels in drywall have been associated with elevated corrosion rates in a home, the act requires that the CPSC issue a regulation that limits the sulfur content for drywall manufactured in the United States or imported from abroad. In lieu of issuing a federal rule, the CPSC may adopt a voluntary consensus standard, developed by C11.01, that addresses the level of sulfur…, ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9277
-
An important ASTM engine coolant standard, ASTM D3321 , Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants, has recently been revised to reflect advances in engine coolant technology used in modern engines. ASTM D3321 is under the jurisdiction of Subcommittee D15.03 on Physical Properties , part of ASTM International Committee…, ASTM Committee D15 Next Meeting:, May 21-22, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Frederick C. Alverson, Shell Global Solutions, Houston, Texas, Phone: 281-544-9217; frederick.alverson@shell.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9274
-
Richard W. Neu, Ph.D., a professor in the Wodruff School of Mechanical Engineering at the Georgia Institute of Technology in Atlanta, Ga., has received the ASTM International Award of Merit from Committee E08 on Fatigue and Fracture . The Award of Merit and its accompanying title of fellow is ASTM’s highest organizational recognition for individual contributions to standards activities. Neu, who…
-
ASTM International Committee D15 on Engine Coolants has formed three new subcommittees: Subcommittees D15.22 on Non-Aqueous Coolants ; D15.25 on Diesel Exhaust Fluid ; and D15.30 on Industrial Heat Transfer Fluids . All interested parties are invited to join in the standards developing activities of these new subcommittees., D15.22, Non-Aqueous Coolants, While there has been an increased interest in non-aqueous coolants industry, there are no current ASTM standards in this area. D15.22 will begin to develop such standards. “The envisioned standards for non-aqueous coolants would be performance standards, rather than ingredient standards, to allow for formulations that are not currently proprietary,” says Jonathan T. Light, chief engineer, Evans…, D15.25, Diesel Exhaust Fluid, Diesel exhaust fluid, often referred to as DEF, is required by many diesel engine-powered vehicles delivered after January 2010. More recent environmental standards issued by the U.S. Environmental Protection Agency have created more stringent emissions standards for agricultural, construction and forestry equipment. DEF is used to reduce nitrogen oxide emissions, which allows original equipment…, D15.30, Industrial Heat Transfer Fluids, Members of D15 recognized that changes in the antifreeze industry, including new manufacturing technologies, improved inhibitor chemistries and recycling technologies, would likely be adapted to the facilities industry as a natural course of innovation. Because D15 has experience developing standards that are technically similar to the facilities heat transfer industry, it was deemed appropriate…, ASTM Committee D15 Next Meeting:, May 17-18, May Committee Week, Anaheim, Calif., Technical Contact:, (D15.22) Jonathan T. Light, Evans Cooling Systems Inc., Sharon, Conn., Phone: 860-435-2418; jtlight@comcast.net ; (D15.25) Edward Eaton Sr., Amalgatech, Phoenix, Ariz., Phone: 602-252-0280; edeaton@amalgatech.com ; (D15.30) John Panasewicz, Clear Choice Antifreeze, Henderson, Colo., Phone: 303-227-9900; johnp@clearchoiceantifreeze.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8837
-
Fatigue fretting is the process of crack formation and progressive crack growth at a location in a mechanical system where two components are in contact and undergoing a vibratory loading. A new ASTM International standard provides insight on what conditions promote fretting fatigue and offers approaches to design an experiment to assess it. ASTM E2789 , Guide for Fretting Fatigue Testing, was…, ASTM Committee E08 Next Meeting:, May 16-20, May Committee Week, Anaheim, Calif., Technical Contact:, Richard W. Neu, Georgia Institute of Technology, Atlanta, Ga., Phone: 404-894-3074; rick.neu@gatech.edu ASTM Staff Contact: Jeff Adkins, Phone: 610-832-9738; jadkins@astm.org ASTM PR Contact: Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #8809