Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard presents procedures for profilograph simulation programs currently in use by the U.S. Federal Aviation Administration and the U.S. Federal Highway Administration. The profilograph has become one of the most popular devices used for quality control in the construction of pavements, with many airfield and highway agencies adopting roughness indexes computed from…, ASTM Committee E17 Next Meeting:, June 15-16, 2014, State College, Pa. Technical Contact: Injun Song, SRA International Inc., Linwood, N.J., Phone: 703-803-1500; injun_song@sra.com, ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9579
-
A test described in a proposed new ASTM International standard will be used primarily by highway authorities to evaluate wet road skidding resistance as a means of reducing the number of automobile accidents. The proposed standard, ASTM WK40015 , Test Method for Determining the Skid Resistance of a Pavement Surface by Measuring the Sideway Force Coefficient (SFCS) Using SCRIM, is being developed…, ASTM Committee E17 Next Meeting:, June 9-12, 2013, June Committee Week, Indianapolis, Ind., Technical Contact:, Richard Dal Lago, W.D.M. Limited, Bristol, United Kingdom, Phone: 117-956-7233; richardd@wdm.co.uk, ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9314
-
ASTM C1264 Addresses Origin and Source Labeling of Drywall and Other Gypsum Products, In response to the importation of contaminated drywall that caused health and safety hazards when used in home construction, the Drywall Safety Act of 2012 (PL 112-266) was signed into law by President Barack Obama on Jan. 14, 2013. The new law cites ASTM International standard C1264-11 , Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling and…, Labeling, The Drywall Safety Act requires the CPSC to set regulations based on C1264 , which was developed by ASTM Subcommittee C11.01 on Specifications and Test Methods for Gypsum Products , part of ASTM Committee C11 on Gypsum and Related Building Materials and Systems . The standard provides the CPSC, states, suppliers and consumers with an effective tool for supply chain communication by specifying…, Up-to-Date Standards, Under the act’s provisions, ASTM International will notify the CPSC of any updates to the labeling standard within 60 days; the CPSC will then have 90 days to disapprove ASTM’s recommended changes. If the CPSC accepts the most updated version of the ASTM standard, then the new version becomes effective 180 days after ASTM’s initial notification., Sulfur Content, Because sulfur content levels in drywall have been associated with elevated corrosion rates in a home, the act requires that the CPSC issue a regulation that limits the sulfur content for drywall manufactured in the United States or imported from abroad. In lieu of issuing a federal rule, the CPSC may adopt a voluntary consensus standard, developed by C11.01, that addresses the level of sulfur…, ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9277
-
Continuous friction measurement equipment (CFME) used to determine skid resistance is the focus of a proposed new ASTM International standard. Interested parties are invited to participate in the development of ASTM WK34937 , Guide for Evaluation, Calibration and Correlation of Continuous Friction Measurement Equipment (CFME). The proposed standard is under the jurisdiction of Subcommittee E17.21…
-
Interlocking concrete pavements are extensively used in low-speed urban and rural roads throughout Europe and are seeing increased use as an alternative to asphalt and cast-in-place concrete in the United States. A proposed new ASTM International standard will address the management by city and county transportation agencies of roads made from interlocking concrete pavements. The proposed new…, ASTM Committee E17 Next Meeting:, June 5-6, 2011, State College, Pa., Technical Contact:, David R. Smith, Interlocking Concrete Pavement Institute, Herndon, Va., Phone: 703-657-6900, ext. 201; dsmith@icpi.org, ASTM Staff Contact:, Daniel Smith, Phone: 610-832-9727; dsmith@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8857
-
Dental dams are rectangular sheets of latex used to isolate specific teeth during dental procedures. Testing laboratories, as well as manufacturers of dental dams, exercise bands, rubber bands and tourniquets will be the primary users of a proposed new ASTM standard on dental dams. ASTM WK28312 , Test Method for Quantitation of Powder on Dental Dams, is currently being developed by Subcommittee…, ASTM Committee D11 Next Meeting:, June 13-16, 2011, June Committee Week, Anaheim, Calif., Technical Contact:, Kelly Horton, LEAP Testing Service, Sayre, Pa., Phone: 570-882-4645; horton_kelly@guthrie.org, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8755
-
Laura Koss of Federal Trade Commission to Provide FTC Perspective, ASTM International Committee D13 on Textiles will sponsor a workshop, The Textile Industry and the Green Challenge: A Federal Trade Commission Perspective, on Tuesday Jan. 31, 2011, from Noon-1:30 p.m. EDT. The workshop will take place during the D13 standards development meetings, which will be held Jan. 30-Feb. 2 at the Baltimore Marriott Waterfront in Baltimore, Md. The workshop will provide a…, ASTM Committee D13 Next Meeting:, Jan. 30-Feb. 2, 2011, January Committee Week, Baltimore, Md., Technical Contact:, Vincent Diaz, Atlantic Thread & Supply Co., Baltimore, Md., Phone: 410-687-9424; vince@atlanticthread.com, ASTM Staff Contact:, Jennifer Rogers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8756
-
Traffic monitoring is a means of counting and classifying vehicles and measuring vehicle flow characteristics, such as vehicle speed, lane occupancy, turning movements and other items typically used to portray traffic movement. In order for traffic monitoring data to be assessed properly, information on how the data were collected, edited, summarized and reported must be provided. This obligation…
-
A new ASTM International standard will provide a fast and effective way to test production lots of thermoplastic elastomers in order to quantify and predict how well they process and what ultimate physical properties will be imparted to final molded or extruded products. ASTM D7605 , Test Method for Thermoplastic Elastomers — Measurement of Polymer Melt Rheological Properties and Congealed…
-
Several years ago, a housing boom followed by recovery from damage caused by Hurricane Katrina and other storms created a surge in the use of imported drywall in the United States, particularly in the southeastern area of the country. However, since then, there have been a number of complaints concerning corrosion and odors in homes in which some of this drywall was used. Interim guidance…