Search
Advanced search
Filter by category
Filter by committee
Search results
-
A proposed ASTM test method will help determine the effects of high temperatures and humidity on fire-retardant-treated wood products. This test method will help product development labs with first steps in developing new products for wood-construction markets. Specifically, according to ASTM member Jerry Winandy, “this new standard will provide an accelerated test of structural composite panels…, ASTM Committee D07 on Wood Next Meeting:, April 13-14, 2016, April 2016 Committee Week, San Antonio, Texas., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Jerry Winandy, University of Minnesota, Minneapolis, Minn., tel +1.763.434.9365; jwinandy@umn.edu, ASTM Staff Contact:, Kevin Shanahan, tel +1.610.832.9737; kshanahan@astm.org Release #10031
-
ASTM International, the American Society for Composites, Syracuse University, the University of Utah, and the National Institute of Aerospace will jointly support the 31st Annual Technical Conference of the American Society for Composites (Sept. 19-21) and the ASTM Committee on Composite Materials (D30) meeting (Sept. 21-22). Both events will be in Williamsburg, Virginia. Information on the…, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Ronald Krueger, National Institute of Aerospace, Hampton, Va., tel +1.757.864.3482; rkrueger@nianet.org , ASTM Staff Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #9969
-
ASTM International’s standard for drywall ( C1396/C1396M-14a, Specification for Gypsum Board ) was cited in the United States Federal Register on Jan. 23, 2015. This fulfilled a goal of the Drywall Safety Act of 2012 to create a standard for limited sulfur content in drywall. Specifically, the Consumer Product Safety Commission determined that C1396 is accepted as “a voluntary standard for…, ASTM Staff Contact:, Thomas O’Toole, tel +1.610.832.9739; totoole@astm.org, ASTM PR Contact:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org Release #9769
-
Maybe you haven’t given much thought to the growth of interlaminar cracks, or cracks in between layers, in laminated composite materials. Perhaps you should though, because such materials are everywhere and interlaminar cracks can cause serious damage to many types of structures and products, from sports equipment to spacecraft. This is why a new ASTM standard, D7905/D7905M , Test Method for…, Technical Contact:, Barry D. Davidson, Ph.D. Syracuse University, Syracuse, N.Y., tel +1.315.443.4201; bddavids@syr.edu, ASTM Staff Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9724
-
ASTM International Committee F33 on Detention and Correctional Facilities is seeking all interested parties to join in the development of proposed standards for visitation booths in correctional facilities. The committee will be developing standards that will answer two main challenges of designing effective visiting booths: • Creating an area that will allow for meaningful interaction between an…, ASTM Committee F33 Next Meeting:, Aug. 15-20, in conjunction with the American Correctional Association 144 Congress of Correction, Salt Lake City, Utah, Technical Contact:, Paul Whitaker, Rosser International, Atlanta, Ga., Phone: 404-888-6941; pwhitaker@rosser.com, ASTM Staff Contact:, Joseph Hugo, Phone: 610-832-9740; jhugo@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9595
-
Two new nonmetallic plaster base standards have been approved by ASTM International Committee C11 on Gypsum and Related Building Materials and Systems . Metallic and nonmetallic plaster bases, also known as lath, are used as reinforcement and to serve as an attachment mechanism for portland cement based plaster or stucco. While standards exist for metal lath, there had not been standards for…, ASTM Committee C11 Next Meeting:, Nov. 10-13, 2014, November Committee Week, New Orleans, La., Technical Contact:, Bill Egan, BASF Corp., Jacksonville, Fla., Phone: 904-996-6115; bill.egan@basf.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9653
-
All interested parties are invited to join in the development of a proposed new ASTM International standard that would be used during the design and installation of suspended gypsum ceiling systems for commercial construction. ASTM WK44242 , Practice for Installation of Metal Suspension Ceiling Systems for Gypsum Board Applications, is being developed by Subcommittee C11.03 on Specifications for…, ASTM Committee C11 Next Meeting:, May 5-8, 2014, May Committee Week, Toronto, Ontario, Canada, Technical Contact:, Joseph J. Kelly, Worthington Armstrong Venture, Malvern, Pa., Phone: 610-722-1218; jjkelly@armstrong.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9576
-
ASTM C1264 Addresses Origin and Source Labeling of Drywall and Other Gypsum Products, In response to the importation of contaminated drywall that caused health and safety hazards when used in home construction, the Drywall Safety Act of 2012 (PL 112-266) was signed into law by President Barack Obama on Jan. 14, 2013. The new law cites ASTM International standard C1264-11 , Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling and…, Labeling, The Drywall Safety Act requires the CPSC to set regulations based on C1264 , which was developed by ASTM Subcommittee C11.01 on Specifications and Test Methods for Gypsum Products , part of ASTM Committee C11 on Gypsum and Related Building Materials and Systems . The standard provides the CPSC, states, suppliers and consumers with an effective tool for supply chain communication by specifying…, Up-to-Date Standards, Under the act’s provisions, ASTM International will notify the CPSC of any updates to the labeling standard within 60 days; the CPSC will then have 90 days to disapprove ASTM’s recommended changes. If the CPSC accepts the most updated version of the ASTM standard, then the new version becomes effective 180 days after ASTM’s initial notification., Sulfur Content, Because sulfur content levels in drywall have been associated with elevated corrosion rates in a home, the act requires that the CPSC issue a regulation that limits the sulfur content for drywall manufactured in the United States or imported from abroad. In lieu of issuing a federal rule, the CPSC may adopt a voluntary consensus standard, developed by C11.01, that addresses the level of sulfur…, ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9277
-
All interested parties are invited to participate in the standards developing activities of new Task Group D07.02.08 on structural insulated panels. The group is under the jurisdiction of Subcommittee D07.02 on Lumber and Engineered Wood Products , part of ASTM International Committee D07 on Wood . Structural insulated panels are a high performance building system for residential and light…, ASTM Committee D07 Next Meeting:, April 16-18, 2013, April Committee Week, Indianapolis, Ind., Technical Contact:, B.J. Yeh, P.E., APA – The Engineered Wood Association, Tacoma, Wash., Phone: 253-620-7467; borjen.yeh@apawood.org ; Eric Tompos, P.E., NTA, Nappanee, Ind., Phone: 574-773-7975; etompos@ntainc.com, ASTM Staff Contact:, Kevin Shanahan, Phone: 610-832-9737; kshanahan@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9315
-
ASTM International Committee D07 on Wood has approved a new standard, ASTM D7746 , Practice for Calculating the Superimposed Load on Wood-Frame Floor-Ceiling Assemblies for Standard Fire Resistance Tests. ASTM D7746, which was developed by Subcommittee D07.05 on Wood Assemblies , will be used in conjunction with other fire test standards. Standards such as ASTM E119, Test Methods for Fire Tests…