Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International subcommittee has been created to develop standards that will be meaningful and accurate performance indicators to measure work-related injury and illness performance throughout the world. Subcommittee E34.55 on Occupational Safety and Health Performance Improvement is under the jurisdiction of ASTM International Committee E34 on Occupational Health and Safety. “Measuring…
-
Several years ago, a housing boom followed by recovery from damage caused by Hurricane Katrina and other storms created a surge in the use of imported drywall in the United States, particularly in the southeastern area of the country. However, since then, there have been a number of complaints concerning corrosion and odors in homes in which some of this drywall was used. Interim guidance…
-
With heightened interest in issues involving corrosive gypsum board, the first draft of a proposed new standard on the subject, ASTM WK26072 , Practice for Evaluation of Buildings to Identify Corrosive Gypsum Board, was reviewed and edited at a task group meeting on Nov. 10 in Atlanta, Ga. The proposed new standard is under the jurisdiction of ASTM Subcommittee C11.01 on Specifications and Test…, ASTM Committee C11 Next Meeting:, May 17-19, 2010, St. Louis, Mo., Technical Contact:, Spiderman Mulholland, U.S. Building Consultants Inc., Gainesville, Fla., Phone: 352-505-6771; spiderman@usbcinc.com, ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8414/Nov2009
-
At an ASTM International meeting held on Oct. 20 it was decided to initiate the formulation of a proposed new ASTM standard that will cover issues relating to drywall and indoor air quality. Representatives from various ASTM International committees, including C11 on Gypsum and Related Building Materials and Systems and E06 on Performance of Buildings attended the meeting, which was held during…
-
ASTM International Subcommittee E34.50 on Health and Safety Standards for Metalworking Fluids has developed three new standards. Two of the recently approved ASTM standards cover aspects of water-miscible metalworking fluids, while the third concerns prevention of dermatitis in the wet metal removal fluid environment., Prevention of Dermatitis, Dermatitis is an inflammatory response of the skin to a chemical or physical agent. While redness, swelling and itching are typical signs of dermatitis, symptoms can be more severe as well. A new ASTM standard, ASTM E2693 , Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment, discusses dermatitis and its causes and presents a comprehensive approach to dermatitis…, Metalworking Fluids, Two new E34.50 standards address the detection of microbial contamination in metalworking fluids: ASTM E2657 , Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids, and ASTM E2694 , Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids. Both ASTM E2657 and ASTM E2694 measure biological contamination in metalworking…, Participation Invited, The subcommittee is currently looking for participants for an interlaboratory study for ASTM E2657 and ASTM E2694 . “We plan to use a single set of MWF for both standards, so labs who are interested in either or both are welcome to participate,” says Passman. “A few labs will run both the ILS’s for both standards, while most will run one or the other.” Subcommittee E34.50 is part of ASTM…
-
The use of non-metallic plaster bases (lath) is growing in the construction industry, and minimum consensus standards are being set for installation, test methods and performance requirements. A task group within Subcommittee C11.02 on Specifications and Test Methods for Accessories and Related Products is currently developing three lath standards: ASTM WK24554 , Test Method for Non-Metallic…
-
Honeycomb ceramics, porous with linear hollow channels, are being used worldwide in automotive catalytic converters and as diesel particulate filters for trucks. Flexural testing of this type of ceramics is addressed in a new ASTM International standard, ASTM C1674 , Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient…
-
All interested parties in the glass industry are invited to participate in the development of a proposed new standard guide for the safe handling of annealed glass. The new standard will be developed by a task group within ASTM Committee E34 on Occupational Health and Safety. A small group from industry and OSHA met in Rossford, Ohio, in March to discuss this new activity. The task group plans to…
-
New Advanced Ceramics Standards from ASTM Cover Fracture Mirror Size Analysis, Tensile Strength DataSubcommittee C28.01 on Mechanical Properties and Performance, part of ASTM International Committee C28 on Advanced Ceramics, has recently approved two new standards, ASTM C1678 , Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses, and ASTM C1683 , Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics., ASTM C1678 —Bringing Consistency to Fracture Mirror Size Analysis, Fracture mirror size analysis is a powerful quantitative tool for the interpretation of broken ceramic and glass articles. While this type of analysis can be used to determine the stress in a part at the instant of fracture, inspection and interpretation procedures have often varied, resulting in uncertainty in stress estimates. ASTM C1678, Practice for Fractographic Analysis of Fracture Mirror…, ASTM C1683 —Scaling Strength Values, ASTM C1683, Practice for Size Scaling of Tensile Strength Using Weibull Statistics for Advanced Ceramics, provides methodology to convert fracture strength parameters estimated from data obtained with one test geometry to strength parameters representing other test geometries. Stephen Duffy, chair of civil engineering, Cleveland State University, and C28 member, says that companies producing…
-
Ceramic and glass companies, as well as universities and government laboratories, will be the primary users of a new ASTM standard that allows for the flexural strength determination of components made in a round shape or after finish machining with minimal waste. The standard, ASTM C1684 , Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature-Cylindrical Rod Strength, was…