Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International Committee C09 on Concrete and Concrete Aggregates is currently developing a proposed standard that addresses bleed stability. ASTM WK28156 , Test Method for Bleed Stability of Cementitious Grout Under Static Pressure, is under the jurisdiction of ASTM International Subcommittee C09.41 on Hydraulic Cement Grouts. When cementitious grouts bleed, mixing water separates from the…, ASTM Committee C09 Next Meeting:, Dec. 6-8, December Committee Week, New Orleans, La., Technical Contact:, Fred Goodwin, BASF Construction Chemicals, Cleveland, Ohio, Phone: 216-839-7009; fred.goodwin@basf.com, ASTM Staff Contact:, Scott Orthey, Phone: 610-832-9730; sorthey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8648
-
Members of ASTM Committees C09 on Concrete and Concrete Aggregates and C01 on Cement, as well as other interested parties, are invited to join new Subcommittee C09.50 on Risk Management for Alkali Aggregate Reactions. The new subcommittee will develop standards on the mitigation of deleterious alkali-aggregate reactions in concrete. To initiate the launch of C09.50, Committees C01 and C09 are the…
-
ASTM International Subcommittee E34.50 on Health and Safety Standards for Metalworking Fluids has developed three new standards. Two of the recently approved ASTM standards cover aspects of water-miscible metalworking fluids, while the third concerns prevention of dermatitis in the wet metal removal fluid environment., Prevention of Dermatitis, Dermatitis is an inflammatory response of the skin to a chemical or physical agent. While redness, swelling and itching are typical signs of dermatitis, symptoms can be more severe as well. A new ASTM standard, ASTM E2693 , Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment, discusses dermatitis and its causes and presents a comprehensive approach to dermatitis…, Metalworking Fluids, Two new E34.50 standards address the detection of microbial contamination in metalworking fluids: ASTM E2657 , Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids, and ASTM E2694 , Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids. Both ASTM E2657 and ASTM E2694 measure biological contamination in metalworking…, Participation Invited, The subcommittee is currently looking for participants for an interlaboratory study for ASTM E2657 and ASTM E2694 . “We plan to use a single set of MWF for both standards, so labs who are interested in either or both are welcome to participate,” says Passman. “A few labs will run both the ILS’s for both standards, while most will run one or the other.” Subcommittee E34.50 is part of ASTM…
-
Subjects Include Aggregate Resistivity, Lightweight Aggregates, Methacrylate Bonding Systems and Semi-Adiabatic Calorimetry The following four proposed new standards are among those currently being developed by subcommittees under the jurisdiction of ASTM Committee C09 on Concrete and Concrete Aggregates. Subject matter covered by these standards includes aggregate resistivity, lightweight…
-
ASTM Pervious Concrete Subcommittee Developing Proposed Standard for Sustainable Mixture ProportionsOnce approved, a proposed new ASTM standard will aid concrete producers in developing sustainable and durable mixture proportions for pervious concrete. The proposed new standard, WK23367 , Test Method for Evaluating the Surface Durability Potential of a Pervious Concrete Mixture, is being developed by Subcommittee C09.49 on Pervious Concrete, part of ASTM International Committee C09 on Concrete…
-
A proposed new ASTM International standard, ASTM WK22233 , Test Method for Indication of Concrete’s Ionic Conductivity, describes a five-minute nondestructive test that has the potential to replace a destructive six-hour test requiring several hours of preparation time. The proposed standard is being developed by Subcommittee C09.66 on Concrete’s Resistance to Fluid Penetration, part of ASTM…
-
Shrinkage that occurs during the drying process is a major cause of cracking in concrete. However, application of shrinkage-reducing admixtures in the field has been yielding positive results, and engineers have realized that admixtures can mitigate cracking. A new ASTM standard currently being developed by Subcommittee C09.23 on Chemical Admixtures will set minimum standards for an admixture to…
-
Because of its porous nature, pervious concrete cannot be tested using standards developed for traditional concrete. In order to fill this need, ASTM International Committee C09 on Concrete and Concrete Aggregates is developing a series of proposed test methods specific to pervious. The first of these proposed standards, ASTM C1688/C1688M , Test Method for Density and Void Content of Freshly…
-
No industry standard currently exists that addresses the vacuum sealing requirements of knife-edged flanges for high vacuum applications. Existing international standards focus on interchangeability of the hardware, but do not address the reliability of the seal. ASTM International Committee E42 on Surface Analysis is now working on a proposed standard on the subject, WK21206 , Specification…
-
A 2002 workshop on galling wear held by ASTM International Committee G02 on Wear and Erosion provided the impetus for the development of a new standard, ASTM G196 , Test Method for Galling Resistance of Material Couples. The new standard is under the jurisdiction of Subcommittee G02.40 on Non-Abrasive Wear. According to Scott Hummel, Ph.D., associate professor, head of the department of…