Search
Advanced search
Filter by category
Filter by committee
Search results
-
A proposed new ASTM standard will provide proper direction and ensure adequate documentation to aid in the interpretation, understanding and reduction of variance in test results for fiber-reinforced concrete. ASTM WK35250 , Practice for Fiber-Reinforced Concrete for Making and Curing Test Specimens in the Laboratory and Field, is now being developed by Subcommittee C09.42 on Fiber-Reinforced…
-
Formalizing a method for making a cylindrical specimen of roller-compacted concrete in a gyratory compactor is the primary purpose of a proposed new ASTM International standard. ASTM WK33682 , Test Method for Preparation, Compaction and Density Determination of Roller-Compacted Concrete Specimens by Means of the Superpave Gyratory Compactor, is being developed by Subcommittee C09.45 on Roller-…
-
While the use of internally cured concrete in construction is not new, there is now better understanding of the internal curing process and why IC using pre-wetted lightweight aggregate increases concrete durability and service life in an economical and practical way. However, there is not currently a standard for lightweight aggregates for internal curing. ASTM International Committee C09 on…
-
Rheologists are encouraged to join in the development of a proposed new practice that will help standardize calibration of rotational rheometers to obtain accurate normal force measurements. ASTM WK33687 , Practice for Normal Force Calibration for Rotational Rheometers, is being developed by Subcommittee E37.08 on Rheology , part of ASTM International Committee E37 on Thermal Measurements . The…, ASTM Committee E37 Next Meeting:, Aug. 10-11, in conjunction with the North American Thermal Analysis Society Annual Conference, Des Moines, Iowa, Technical Contact:, Kenneth Aniunioh, Shimadzu Scientific Instruments, Laurel, Md., Phone: 864-633-7690; kenebaano@yahoo.com, ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8923
-
A new ASTM International subcommittee has been created to develop standards that will be meaningful and accurate performance indicators to measure work-related injury and illness performance throughout the world. Subcommittee E34.55 on Occupational Safety and Health Performance Improvement is under the jurisdiction of ASTM International Committee E34 on Occupational Health and Safety. “Measuring…
-
ASTM International Committee C09 on Concrete and Concrete Aggregates is currently developing a proposed standard that addresses bleed stability. ASTM WK28156 , Test Method for Bleed Stability of Cementitious Grout Under Static Pressure, is under the jurisdiction of ASTM International Subcommittee C09.41 on Hydraulic Cement Grouts. When cementitious grouts bleed, mixing water separates from the…, ASTM Committee C09 Next Meeting:, Dec. 6-8, December Committee Week, New Orleans, La., Technical Contact:, Fred Goodwin, BASF Construction Chemicals, Cleveland, Ohio, Phone: 216-839-7009; fred.goodwin@basf.com, ASTM Staff Contact:, Scott Orthey, Phone: 610-832-9730; sorthey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8648
-
Members of ASTM Committees C09 on Concrete and Concrete Aggregates and C01 on Cement, as well as other interested parties, are invited to join new Subcommittee C09.50 on Risk Management for Alkali Aggregate Reactions. The new subcommittee will develop standards on the mitigation of deleterious alkali-aggregate reactions in concrete. To initiate the launch of C09.50, Committees C01 and C09 are the…
-
ASTM International Subcommittee E34.50 on Health and Safety Standards for Metalworking Fluids has developed three new standards. Two of the recently approved ASTM standards cover aspects of water-miscible metalworking fluids, while the third concerns prevention of dermatitis in the wet metal removal fluid environment., Prevention of Dermatitis, Dermatitis is an inflammatory response of the skin to a chemical or physical agent. While redness, swelling and itching are typical signs of dermatitis, symptoms can be more severe as well. A new ASTM standard, ASTM E2693 , Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment, discusses dermatitis and its causes and presents a comprehensive approach to dermatitis…, Metalworking Fluids, Two new E34.50 standards address the detection of microbial contamination in metalworking fluids: ASTM E2657 , Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids, and ASTM E2694 , Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids. Both ASTM E2657 and ASTM E2694 measure biological contamination in metalworking…, Participation Invited, The subcommittee is currently looking for participants for an interlaboratory study for ASTM E2657 and ASTM E2694 . “We plan to use a single set of MWF for both standards, so labs who are interested in either or both are welcome to participate,” says Passman. “A few labs will run both the ILS’s for both standards, while most will run one or the other.” Subcommittee E34.50 is part of ASTM…
-
The ASTM International Proficiency Testing Center is pleased to offer a 2010 Proficiency Testing Program on Thermal Analyses of Plastics (TAP) to laboratories who need a statistical quality assurance tool that will enable them to improve and maintain a high level of performance in conducting ASTM Differential Scanning Calorimetry (DSC), Oxidative-Induction Time (OIT) by Differential Scanning…, ASTM D3418, , Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC);, ASTM D3850, , Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA); and, ASTM D3895, , Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry. For each test trial, laboratory participants receive two sample materials along with interactive electronic data report forms and test instructions. Using the specified ASTM program tests, participating laboratories conduct the tests of their choice that they routinely run. Upon completion of…
-
Subjects Include Aggregate Resistivity, Lightweight Aggregates, Methacrylate Bonding Systems and Semi-Adiabatic Calorimetry The following four proposed new standards are among those currently being developed by subcommittees under the jurisdiction of ASTM Committee C09 on Concrete and Concrete Aggregates. Subject matter covered by these standards includes aggregate resistivity, lightweight…