Search
Advanced search
Filter by category
Filter by committee
Search results
-
A proposed new ASTM test method will be used to quantify the resistivity of concreting materials that are widely used for construction around the world. ASTM WK37880 , Test Method for Measuring the Surface Resistivity of Hardened Concrete Using the Wenner Four-Electrode Method, is being developed by Subcommittee C09.66 on Concrete’s Resistance to Fluid Penetration , part of ASTM International…, ASTM Committee C09 Next Meeting:, June 9-12, 2013, June Committee Week, Indianapolis, Ind., Technical Contact:, Kenneth A. Snyder, National Institute of Standards and Technology, Gaithersburg, Md., Phone: 301-975-4260; kenneth.snyder@nist.gov, ASTM Staff Contact:, Scott Orthey; Phone: 610-832-9730; sorthey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9321
-
ASTM C1264 Addresses Origin and Source Labeling of Drywall and Other Gypsum Products, In response to the importation of contaminated drywall that caused health and safety hazards when used in home construction, the Drywall Safety Act of 2012 (PL 112-266) was signed into law by President Barack Obama on Jan. 14, 2013. The new law cites ASTM International standard C1264-11 , Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling and…, Labeling, The Drywall Safety Act requires the CPSC to set regulations based on C1264 , which was developed by ASTM Subcommittee C11.01 on Specifications and Test Methods for Gypsum Products , part of ASTM Committee C11 on Gypsum and Related Building Materials and Systems . The standard provides the CPSC, states, suppliers and consumers with an effective tool for supply chain communication by specifying…, Up-to-Date Standards, Under the act’s provisions, ASTM International will notify the CPSC of any updates to the labeling standard within 60 days; the CPSC will then have 90 days to disapprove ASTM’s recommended changes. If the CPSC accepts the most updated version of the ASTM standard, then the new version becomes effective 180 days after ASTM’s initial notification., Sulfur Content, Because sulfur content levels in drywall have been associated with elevated corrosion rates in a home, the act requires that the CPSC issue a regulation that limits the sulfur content for drywall manufactured in the United States or imported from abroad. In lieu of issuing a federal rule, the CPSC may adopt a voluntary consensus standard, developed by C11.01, that addresses the level of sulfur…, ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9277
-
A proposed new ASTM standard will provide proper direction and ensure adequate documentation to aid in the interpretation, understanding and reduction of variance in test results for fiber-reinforced concrete. ASTM WK35250 , Practice for Fiber-Reinforced Concrete for Making and Curing Test Specimens in the Laboratory and Field, is now being developed by Subcommittee C09.42 on Fiber-Reinforced…
-
Formalizing a method for making a cylindrical specimen of roller-compacted concrete in a gyratory compactor is the primary purpose of a proposed new ASTM International standard. ASTM WK33682 , Test Method for Preparation, Compaction and Density Determination of Roller-Compacted Concrete Specimens by Means of the Superpave Gyratory Compactor, is being developed by Subcommittee C09.45 on Roller-…
-
While the use of internally cured concrete in construction is not new, there is now better understanding of the internal curing process and why IC using pre-wetted lightweight aggregate increases concrete durability and service life in an economical and practical way. However, there is not currently a standard for lightweight aggregates for internal curing. ASTM International Committee C09 on…
-
ASTM International Committee C09 on Concrete and Concrete Aggregates is currently developing a proposed standard that addresses bleed stability. ASTM WK28156 , Test Method for Bleed Stability of Cementitious Grout Under Static Pressure, is under the jurisdiction of ASTM International Subcommittee C09.41 on Hydraulic Cement Grouts. When cementitious grouts bleed, mixing water separates from the…, ASTM Committee C09 Next Meeting:, Dec. 6-8, December Committee Week, New Orleans, La., Technical Contact:, Fred Goodwin, BASF Construction Chemicals, Cleveland, Ohio, Phone: 216-839-7009; fred.goodwin@basf.com, ASTM Staff Contact:, Scott Orthey, Phone: 610-832-9730; sorthey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8648
-
Several years ago, a housing boom followed by recovery from damage caused by Hurricane Katrina and other storms created a surge in the use of imported drywall in the United States, particularly in the southeastern area of the country. However, since then, there have been a number of complaints concerning corrosion and odors in homes in which some of this drywall was used. Interim guidance…
-
Members of ASTM Committees C09 on Concrete and Concrete Aggregates and C01 on Cement, as well as other interested parties, are invited to join new Subcommittee C09.50 on Risk Management for Alkali Aggregate Reactions. The new subcommittee will develop standards on the mitigation of deleterious alkali-aggregate reactions in concrete. To initiate the launch of C09.50, Committees C01 and C09 are the…
-
With heightened interest in issues involving corrosive gypsum board, the first draft of a proposed new standard on the subject, ASTM WK26072 , Practice for Evaluation of Buildings to Identify Corrosive Gypsum Board, was reviewed and edited at a task group meeting on Nov. 10 in Atlanta, Ga. The proposed new standard is under the jurisdiction of ASTM Subcommittee C11.01 on Specifications and Test…, ASTM Committee C11 Next Meeting:, May 17-19, 2010, St. Louis, Mo., Technical Contact:, Spiderman Mulholland, U.S. Building Consultants Inc., Gainesville, Fla., Phone: 352-505-6771; spiderman@usbcinc.com, ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8414/Nov2009
-
At an ASTM International meeting held on Oct. 20 it was decided to initiate the formulation of a proposed new ASTM standard that will cover issues relating to drywall and indoor air quality. Representatives from various ASTM International committees, including C11 on Gypsum and Related Building Materials and Systems and E06 on Performance of Buildings attended the meeting, which was held during…