Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s Committee on Homeland Security Applications ( E54 ) recently approved three new standards for body armor for military and criminal justice personnel, helping protect them from gunshots and stabs. According to ASTM member Casandra Robinson, a broad group of stakeholders (including the National Institute of Justice, the U.S. Army Program Executive Office, and the National…, ASTM Committee E54 on Homeland Security Applications Next Meeting:, June 27-29, 2016, June Committee Week, Chicago, Ill. , Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Casandra Robinson, National Institute of Standards and Technology, Gaithersburg, Md., tel +1.301.975.2546; casandra.robinson@nist.gov , ASTM Staff Contact:, Mary Mikolajewski, tel +1.610.832.9678; mmikolajewski@astm.org Release #10007
-
A new ASTM standard tests the potential of a pressurized aerosol product to be accidentally inhaled and aspirated (drawn into the respiratory tract of those near the spraying). The standard ( D7952 , Test Method for Measuring Aspiration Potential of Aerosol Products) specifically tests aspiration potential by determining spray pattern and aerosol deposition rates. Aspiration can potentially cause…, STM Committee D01 on Paint and Related Coatings, Materials and Applications Next Meeting:, June 21-23, 2015, Ft. Lauderdale, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Woodhall Stopford, Duke University Medical Center, Durham, N.C., tel +1.919.732.7442; woodhall.stopford@duke.edu, ASTM Staff Contact:, Jeffrey Adkins, tel +1.610.832.9738; jadkins@astm.org Release #9835 ###
-
More than a decade after the post-Sept. 11 anthrax mail scares, rapidly screening and identifying potential biological agents in suspicious powders remains a challenge. A proposed ASTM International standard, ASTM WK46895 , Specification for Hand Portable Biodetection Instruments for Homeland Security Applications, will prove to be helpful in this area. “It is important that testing requirements…, ASTM Committee E54 Next Meetings:, Jan. 26-18, 2015, January Committee Week, New Orleans, La.; June 15-17, 2015, June Committee Week, Anaheim, Calif., Technical Contact:, Richard Ozanich, National Security Directorate, Pacific Northwest National Laboratory, Richland, Wash., tel +1.509.375.4586; richard.ozanich@pnnl.gov, ASTM Staff Contact:, Robert Morgan, tel +1.610.832.9732; rmorgan@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9755
-
Pigment manufacturers use the loss on ignition test to determine water of hydration or crystallized water. While loss on ignition is a frequently used test, its methodology is embedded within other standards and varies from one to another. Now, a proposed new standard, ASTM WK46877, Test Method for Pigment Loss on Ignition, will provide definitive instructions for conducting this common test. “…, ASTM Committee D01 Next Meeting:, Jan. 25-27, 2015, January Committee Week, New Orleans, La., Technical Contact:, Steven Brunner, WPC Technologies, Milwaukee, Wis., Phone: 414-225-2415; sbrunner@wpctech.com, ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9682
-
A proposed ASTM specification will fill a need for a standard ensuring that protective helmets, particularly those used in law enforcement, are tested consistently. Once approved, ASTM WK46152, Specification for Ballistic-Resistant Head Protection for Law Enforcement Applications, will provide law enforcement and other public safety agencies with a means of establishing minimum performance…, ASTM Committee E54 Next Meeting:, Jan. 26-28, 2015, January Committee Week, New Orleans, La., Technical Contact:, John Cronin, HP White Laboratory Inc., Cortland, N.Y., Phone: 603-933-3768; john.cronin@hpwhite.com, ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9633
-
A proposed new ASTM International standard is emerging from research being conducted at the U.S. Bureau of Reclamation to identify and investigate coatings that will prevent the settlement and attachment of erosion-causing invasive species such as zebra and quagga mussels inside water and wastewater pipelines. The proposed standard, ASTM WK45207 , Test Method for Erosion of Coatings by Flowing…, ASTM Committee D01 Next Meeting:, June 22-24, 2014, in conjunction with ASTM International Committee D02 on Petroleum Products, Liquid Fuels and Lubricants meeting, Indianapolis, Ind., Technical Contact:, Daniel Libby, Chase Corp., Westwood, Mass., Phone: 781-332-0782; dlibby@chasecorp.com, ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9645
-
Ballistic-resistant shields are essential to the safety of law enforcement officers, especially during active shooter incidents. A proposed new ASTM International standard, ASTM WK45341 , Test Method for Ballistic Resistant Shields, will be used to establish minimum performance requirements for this life-saving equipment. ASTM WK45341 falls under the jurisdiction of Subcommittee E54.04 on…, ASTM Committee E54 Next Meeting:, May 28-30, 2014, National Institute of Standards and Technology, Gaithersburg, Md., Technical Contact:, David Otterson, Ph.D., National Law Enforcement and Corrections Technology Center, Gaithersburg, Md., Phone: 301-240-6754; david.m.otterson@lmco.com , ASTM Staff Contact:, Rick Lake, 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9643
-
An ASTM subcommittee is developing a proposed standard to test the slip coefficient properties of coatings used in slip-critical bolted connections. The test is based on an appendix in the “Specification for Structural Joints Using High-Strength Bolts,” published by the Research Council on Structural Connections. The proposed ASTM standard will expand on the Research Council standard by…, ASTM Committee D01 Next Meeting:, June 22-24, 2014, Indianapolis, Ind., Technical Contact:, Bill Corbett, KTA-Tator Inc., Pittsburgh, Pa., Phone: 412-788-1300, ext. 223; bcorbett@kta.com , ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9638
-
ASTM International Committee F38 on Unmanned Aircraft Systems has approved seven new standards that cover all major facets of small unmanned aircraft systems operations, including design, construction, operation and maintenance requirements. The seven new ASTM standards, written for all sUAS that are permitted to operate over a defined area and in airspace defined by a nation’s governing aviation…, ASTM F2908, Specification for Aircraft Flight Manual (AFM) for a Small Unmanned Aircraft System (sUAS), − ASTM F2908 defines minimum requirements for the aircraft flight manual, which provides guidance to owners, mechanics, pilots, crew members, airports, regulatory officials and aircraft and component manufacturers who perform or provide oversight of sUAS flight operations. •, ASTM F2909, Practice for Maintenance and Continued Airworthiness of Small Unmanned Aircraft Systems (sUAS), − ASTM F2909 establishes a practice for the maintenance and continued airworthiness of sUAS. Requirements for continued airworthiness, inspections, maintenance and repairs/alterations are included. •, ASTM F2910, Specification for Design and Construction of a Small Unmanned Aircraft System (sUAS), − ASTM F2910 defines the design, construction and test requirements for sUAS. In addition to general requirements, ASTM F2910 covers requirements for structure, propulsion, propellers, fuel and oil systems, cooling, documentation and other key areas. •, ASTM F2911, Practice for Production Acceptance of Small Unmanned Aircraft System (sUAS), − ASTM F2911 defines production acceptance requirements for sUAS. Requirements covered include several aspects of production, system level production acceptance, quality assurance and documentation. •, ASTM F3002, Specification for Design of the Command and Control System for Small Unmanned Aircraft Systems (sUAS), − ASTM F3002 provides a consensus standard in support of an application to a nation’s governing aviation authority to operate an sUAS for commercial or public use. The standard focuses on command and control (C2) links, including a diagram of a C2 system and general requirements for C2 system components. •, ASTM F3003, Specification for Quality Assurance of a Small Unmanned Aircraft System (sUAS), − ASTM F3003 defines quality assurance requirements for design, manufacture and production of small unmanned aircraft systems. Guidance is given to sUAS manufacturers for the development of a quality assurance program. •, ASTM F3005, Specification for Batteries for Use in Small Unmanned Aircraft Systems (sUAS), − ASTM F3005 defines requirements for battery cells used in sUAS. Mechanical design and safety, and electrical design battery maintenance are primary battery-related areas that are covered. “The introduction of these standards developed by F38 will help to provide a safe and appropriate path for near-term routine sUAS operations in airspace systems of the United States and other countries,” says…, Technical Contact:, Theodore J. Wierzbanowski, Phone: 626-429-8864; wierzbanowski@uasinthenas.com, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9636
-
Specifications Present Baseline Requirements for Handheld and Stationary Point Chemical Vapor Detectors, Two new ASTM International specifications are the first standards to present baseline performance requirements for point chemical vapor detectors. The standards were developed as the result of a need recognized by the U.S. Department of Homeland Security for chemical, biological, radiological, nuclear and explosives detection capability, as well as the need to set standards so that manufacturers…, ASTM Committee E54 Next Meeting:, Jan. 27-29, 2014, January Committee Week, Houston, Texas, Technical Contact:, Pamela Chu, Ph.D., National Institute for Standards and Technology, Gaithersburg, Md., Phone: 301-975-2988; pamela.chu@nist.gov , ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9499