Search
Advanced search
Filter by category
Filter by committee
Search results
-
Two new standards developed by ASTM International Committee E56 on Nanotechnology will assist a variety of users in aspects of nanomaterial measurement. ASTM E2834 , Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Nanoparticle Tracking Analysis (NTA), and ASTM E2859 , Guide for Size Measurement of Nanoparticles Using Atomic Force Microscopy, are both under…, Nanoparticle Tracking Analysis, ASTM E2834 describes nanoparticle tracking analysis, a new measurement technique for direct and real-time visualization and analysis of nanoparticles in liquids. In NTA, particles in suspension are illuminated with a focused laser beam and light scattered from each particle is visible through magnifying optics fitted to a digital camera. ASTM E2834 discusses the scientific basis for nanoparticle…, Nanoparticle Size Measurement, According to Vince Hackley, research chemist and project leader in the Materials Measurement Science Division of the National Institute of Standards and Technology, ASTM E2859 provides guidelines for sample preparation, measurement and analysis of results related to the use of atomic force microscopy, or AFM. AFM is a technique used to image, measure and manipulate matter at the nanoscale. The…, ASTM Committee E56 Next Meeting:, May 20-21, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, (E2834) Duncan Griffiths, NanoSight USA, Costa Mesa, Calif., Phone: 714-747-9955; duncan.griffiths@nanosight.com ; (E2859) Vincent A. Hackley, Ph.D., National Institute of Science and Technology, Gaithersburg, Md., Phone: 301-975-5790; vince.hackley@nist.gov, ASTM Staff Contact:, Kathleen McClung, Phone: 610-832-9717; kmcclung@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9301
-
Phased array probes are a recently developed technology that offers significant advantages in the detection, sizing and imaging of defects that can affect the structural components of airplanes, bridges, power plants and other critical areas. A new ASTM International standard describes testing that can be done on various arrays to ensure that all inspectors are using similar testing equipment.…, ASTM Committee E07 Next Meeting:, June 2-6, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, Michael Moles, Olympus NDT, Waltham, Mass., Phone: 416-831-4428; michael.moles@olympusndt, ASTM Staff Contact:, Kathleen McClung, Phone: 610-832-9717; kmcclung@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9299
-
An important ASTM engine coolant standard, ASTM D3321 , Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants, has recently been revised to reflect advances in engine coolant technology used in modern engines. ASTM D3321 is under the jurisdiction of Subcommittee D15.03 on Physical Properties , part of ASTM International Committee…, ASTM Committee D15 Next Meeting:, May 21-22, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Frederick C. Alverson, Shell Global Solutions, Houston, Texas, Phone: 281-544-9217; frederick.alverson@shell.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9274
-
Zeta potential provides a guide to the stability of solid or liquid particles in a liquid system, such as intravenous foods. A new ASTM International standard focuses on the zeta potential in systems containing biological material such as proteins, DNA, liposomes and other organic materials. The new standard, ASTM E2865 , Guide for Measurement of Electrophoretic Mobility and Zeta Potential of…, ASTM Committee E56 Next Meeting:, Nov. 12-13, November Committee Week, Atlanta Ga., Technical Contact:, Alan Rawle, Ph.D, Malvern Instruments Inc., Westborough, Mass., Phone: 508-768-6434; alan.rawle@malvern.com, ASTM Staff Contact:, Kathleen McClung, Phone: 610-832-9717; kmcclung@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9317
-
A new ASTM International standard provides the necessary background and describes the step-by-step process for analyzing nondestructive testing hit/miss data resulting from a probability of detection (POD) examination, including minimum requirements for validating the resulting POD curve. The new standard, ASTM E2862 , Practice for Probability of Detection Analysis for Hit/Miss Data, has been…
-
A recently approved ASTM International standard will be used by neutron imaging facilities, particularly those that are setting up neutron tomography imaging systems. The new standard, ASTM E2861 , Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams, was developed by Subcommittee E07.05 on Radiology (Neutron) Method , part of ASTM International Committee E07…
-
ASTM International Committee E07 on Nondestructive Testing has developed a new standard for recertifying gas-filled pressure vessels used aboard aircraft for fire suppression. The new standard, ASTM E2863 , Practice for Acoustic Emission Examination of Welded Steel Sphere Vessels Using Thermal Pressurization, is under the jurisdiction of Subcommittee E07.04 on Acoustic Emission Method . According…
-
A new ASTM International standard will provide an industrywide practice for inspecting long lengths of above ground steel pipework using guided wave testing. ASTM E2775 , Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction, is under the jurisdiction of Subcommittee E07.10 on Specialized NDT Methods , part of ASTM International Committee E07 on…, ASTM Committee E07 Next Meeting:, Jan. 22-26, 2012, Plantation, Fla., Technical Contact:, Jimmy Fong, Guided Ultrasonics Ltd., Brentford, Great Britain, Phone: +011-44-0-45-605-0227; jimmy@guided-ultrasonics.com, ASTM Staff Contact:, Kathleen McClung, Phone: 610-832-9717; kmcclung@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #8993
-
ASTM International Committee D15 on Engine Coolants has formed three new subcommittees: Subcommittees D15.22 on Non-Aqueous Coolants ; D15.25 on Diesel Exhaust Fluid ; and D15.30 on Industrial Heat Transfer Fluids . All interested parties are invited to join in the standards developing activities of these new subcommittees., D15.22, Non-Aqueous Coolants, While there has been an increased interest in non-aqueous coolants industry, there are no current ASTM standards in this area. D15.22 will begin to develop such standards. “The envisioned standards for non-aqueous coolants would be performance standards, rather than ingredient standards, to allow for formulations that are not currently proprietary,” says Jonathan T. Light, chief engineer, Evans…, D15.25, Diesel Exhaust Fluid, Diesel exhaust fluid, often referred to as DEF, is required by many diesel engine-powered vehicles delivered after January 2010. More recent environmental standards issued by the U.S. Environmental Protection Agency have created more stringent emissions standards for agricultural, construction and forestry equipment. DEF is used to reduce nitrogen oxide emissions, which allows original equipment…, D15.30, Industrial Heat Transfer Fluids, Members of D15 recognized that changes in the antifreeze industry, including new manufacturing technologies, improved inhibitor chemistries and recycling technologies, would likely be adapted to the facilities industry as a natural course of innovation. Because D15 has experience developing standards that are technically similar to the facilities heat transfer industry, it was deemed appropriate…, ASTM Committee D15 Next Meeting:, May 17-18, May Committee Week, Anaheim, Calif., Technical Contact:, (D15.22) Jonathan T. Light, Evans Cooling Systems Inc., Sharon, Conn., Phone: 860-435-2418; jtlight@comcast.net ; (D15.25) Edward Eaton Sr., Amalgatech, Phoenix, Ariz., Phone: 602-252-0280; edeaton@amalgatech.com ; (D15.30) John Panasewicz, Clear Choice Antifreeze, Henderson, Colo., Phone: 303-227-9900; johnp@clearchoiceantifreeze.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8837
-
The importance of digital detector array technology is increasing as industry continues its transition from film radiography to the digital realm. Subcommittee E07.01 on Radiology (X and Gamma) Method, part of ASTM International Committee E07 on Nondestructive Testing, has recently approved the following three new standards that will aid users in the film-to-digital transition: • ASTM E2698 ,…