Search
Advanced search
Filter by category
Filter by committee
Search results
-
For more than 100 years, cork tile has been commonly used as a floor and wall covering for residential and commercial use. A new ASTM International standard, ASTM F3008 , Specification for Cork Floor Tile, specifies requirements for cork floor coverings made from agglomerated composition cork supplied in tile form, which is designed to be used with a factory finish or an in situ finish, or both.…, ASTM Committee F06 Next Meeting:, May 7-8, 2014, Clearwater, Fla., Technical Contact:, Christopher Capobianco, Spartan Surfaces, Patchogue, N.Y., Phone: 631-275-6494; christopher@spartansurfaces.com, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9523
-
A new ASTM International standard identifies and defines sustainable laundry best management practices that are used by commercial laundry facilities to reduce their impact on the environment. ASTM D7841 , Practice for Sustainable Laundry Best Management Practices, was developed by Subcommittee D13.40 on Sustainability of Textiles , part of ASTM International Committee D13 on Textiles . “D7841…, Water Reuse Technology, —Technology or equipment within a laundry facility that reuses, reclaims or recycles water •, Boiler Heat Recovery, —Technology or equipment within a laundry facility that recovers heat produced from the facility’s water boiler system •, Energy Efficient Low-Temperature Detergents, —Detergents that are effective in eliminating pathogenic bacteria at low-wash temperatures •, Alternative Energy, —Solar or geothermal energy that clearly provides a minimum of 10 percent of the electrical energy used in the laundry •, Fleet Vehicle Route Optimization, —Use of software or technologies to maximize the efficiency of routes driven by fleet vehicles •, Recycling Programs, —Qualified waste recycling programs within a laundry facility Freeman, a D13.40 member, says industries that rely on the use of delivered laundered textiles will be the primary users of D7841 . “We expect D7841 to build awareness in the textile services marketplace of laundry sustainability, not only as an indicator of a provider’s longevity, but their ability to produce cost-effectively,” says…, ASTM Committee D13 Next Meeting:, Jan. 26-29, 2014, January Committee Week, Houston, Texas, Technical Contact:, Angela D. Freeman, TRSA, Alexandria, Va., Phone: 703-519-0029, ext. 111; afreeman@trsa.org, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9462
-
A new ASTM International standard describes a solvent rub technique that can be used in the laboratory, field or fabrication shop for assessing the solvent resistance of an organic coating that chemically and/or physically changes during the curing process. ASTM D7835 , Test Method for Determining the Solvent Resistance of an Organic Coating Using a Mechanical Rubbing Machine, was developed by…, ASTM Committee D01 Next Meeting:, Jan. 26-28, 2014, January Committee Week, Houston, Texas, Technical Contact:, Ted Best, Valspar Corp., Bowling Green, Ky., Phone: 270-746-6867; tbest@valspar.com , ASTM Staff Contact:, Jeff Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9447
-
A new ASTM International standard will be used to substantiate manufacturers’ claims on the inherent dry fall characteristics of coating materials such as paint. ASTM D7868 , Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings, was developed by Subcommittee D01.46 on Industrial Protective Coatings , part of ASTM International Committee D01 on Paint and Related Coatings,…, ASTM Committee D01 Next Meeting:, Jan. 26-28, 2014, January Committee Week, Houston, Texas, Technical Contact:, Bill Corbett, KTA-Tator Inc., Pittsburgh, Pa., Phone: 412-412-1300 ext. 223; bcorbett@kta.com , ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9449
-
A proposed new ASTM International standard will offer guidelines for selecting wood substrates for the evaluation of the weathering performance of architectural coatings, such as exterior paints, primers and deck finishes. The proposed standard, ASTM WK32654 , Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings, is being developed by Subcommittee D01.42 on…, ASTM Committee D01 Next Meeting:, June 23-25, 2013, in conjunction with D02 June meeting, Montreal, Quebec, Canada, Technical Contact:, Marek Gnatowski, Ph.D., Polymer Engineering Co. Ltd., Burnaby, British Columbia, Canada, Phone: 604-298-7633; pecltd@telus.net , ASTM Staff Contact:, Jeff Adkins, Phone: 610-832-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9363
-
All interested parties are invited to join in the ongoing development of ASTM International standard ASTM D3181 , Guide for Conducting Wear Tests on Textiles. The standard is now under the jurisdiction of Subcommittee D13.60 on Fabric Test Methods, Specific , part of ASTM International Committee D13 on Textiles . ASTM D3181 is used to provide data that will help predict the expected wear…, ASTM Committee D13 Next Meeting:, June 9-12, 2013, June Committee Week, Indianapolis, Ind., Technical Contact:, Norma M. Keyes, Keyes Consulting LLC, Apex, N.C., Phone: 919-362-4044; keyesconsult@att.net, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9320
-
A new ASTM International standard describes methods of preparing surfaces of hot-dip galvanized iron and steel for powder coating and the application of powder coating materials. The new standard, ASTM D7803 , Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating, was developed by Subcommittee D01.46 on Industrial Protective…, ASTM Committee D01 Next Meeting:, June 23-25, 2013, Montreal, Quebec, Canada, Technical Contact:, Thomas J. Langill, American Galvanizers Association, Centennial, Colo., Phone: 720-554-0900, ext. 14; tlangill@galvanizeit.org, ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9291
-
When applying coatings, paint brushes can shed filling material onto the coated surface. A new ASTM International standard describes a procedure for testing the shedding properties of both natural bristle and synthetic filament paint brushes. ASTM D7834 , Test Method for Filling Material Shedding of Paint Brushes, has been developed by Subcommittee D01.61 on Paint Application Tools , part of ASTM…, ASTM Committee D01 Next Meeting:, June 23-24, 2013, June Committee Week, Jacksonville, Fla., Technical Contact:, Gary DeCarr, Newell Rubbermaid, Huntersville, N.C., Phone: 704-987-4462; gary.decarr@shurline.com, ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9288
-
A recently published ASTM International standard covers a new type of resilient flooring tile product based on a polyester binder. ASTM F2982 , Specification for Polyester Composition Floor Tile, was developed by Subcommittee F06.80 on Specifications , part of ASTM International Committee F06 on Resilient Floor Coverings . “ ASTM F2982 sets forth an explicit set of compositional and performance…, ASTM Committee F06 Next Meeting:, May 22-23, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Thomas Erisman, Armstrong World Industries, Lancaster, Pa., Phone: 717-396-5354; tcerisman@armstrong.com, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9271
-
Proposed ASTM standards for aerosol products and artists pastels are among the current activities of Subcommittee D01.57 on Artist Paints and Related Materials , part of ASTM International Committee D01 on Paint and Related Coatings, Materials and Applications ., Aspiration Potential of Aerosol Products, Self-pressurized aerosol containers that contain 10 percent or more petroleum distillates and come out as a stream can present an aspiration risk, since inhaling such fluids has been associated with chemical pneumonia. A proposed new ASTM standard, ASTM WK37409 , Test Method for Measuring Aspiration Potential of Aerosol Products, is being developed to support the evaluation of such products to…, Artists Pastels, A proposed new standard, ASTM WK37916 , Specification for Artists Pastels, will provide the pastel industry with a benchmark standard to allow them to test colors so that pastels can withstand exposure to light without fading. “Being able to rely on a color to remain the same is important to an artist,” says Michael Skalka, conservation administrator for the Conservation Division, National…, ASTM Committee D01 Next Meeting:, Jan. 27-29, 2013, January Committee Week, Jacksonville, Fla., Technical Contacts:, (WK37409) Woodhall Stopford, Duke University Medical Center, Durham, N.C., Phone: 916-286-5744, woodhall.stopford@duke.edu ; (WK37916) Michael Skalka, National Gallery of Art, Landover, Md., Phone: 202-842-6439; m-skalka@nga.gov, ASTM Staff Contact:, Jeff Adkins, Phone: 610-832-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9308