Search
Advanced search
Filter by category
Filter by committee
Search results
-
A proposed new standard will provide a practice for inspecting and evaluating the retroreflective properties of longitudinal non-intersection pavement markings. The proposed standard, WK16773 , Practice for Evaluating Retroreflectance of Pavement Markings Using Portable Hand-Operated Instruments, is being developed by Subcommittee D04.38 on Highway Traffic Control Materials, which is part of ASTM…
-
Interested parties are invited to participate in the ongoing development of a proposed new standard, WK15543 , Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending. The proposed standard is being developed by Subcommittee D04.26 on Fundamental/Mechanistic Tests, which is part of ASTM International Committee D04 on Road and Paving…
-
Two new standards have recently been approved by ASTM International Committee D04 on Road and Paving Materials. The standards, both of which are under the jurisdiction of Subcommittee D04.26 on Fundamental/Mechanistic Tests, are D 6931 , Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures, and D 7312 , Test Method for Determining the Permanent Shear Strain and Complex Shear…, ASTM D 6931, Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures, The withdrawal of D 4123 , Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures, led to the development of D 6931 , since D 4123 contained a description of an indirect tensile strength test that was referred to in several other standards. It was decided to develop this test into a completely separate standard, D 6931, to stand on its own merit as a method that…, ASTM D 7312, Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST), According to Rebecca McDaniel, technical director, North Central Superpave Center, and leader of the D 7312 task group, Superpave is a system for designing asphalt mixtures to ensure that the right asphalt binder and aggregate structure is used for the traffic and climate where it will be placed on the road. To facilitate the implementation of Superpave, the Federal Highway Administration…
-
ASTM International Committee C26 on Nuclear Fuel Cycle has recently published a new standard and has begun the development of a proposed new standard. Subcommittee C26.14 on Remote Systems is responsible for the newly approved standard, C 1661 , Guide for Viewing Systems for Remotely Operated Facilities, while Subcommittee C26.02 on Fuel and Fertile Material Specifications is currently at work on…, C 1661, Guide for Viewing Systems for Remotely Operated Facilities, A new ASTM International standard establishes minimum requirements for viewing systems for remotely operated facilities, including hot cells, used for the processing and handling of nuclear and radioactive materials. The standard, C 1661 , Guide for Viewing Systems for Remotely Operated Facilities, was developed by Subcommittee C26.14 on Remote Systems, which is part of ASTM International…, WK14330, Nuclear Fuel Pellet Physical Integrity Limits: Chips, Cracks, Defects, The quality of fuel pellets is currently an important topic being studied throughout the nuclear industry, with study groups such as the Electric Power Research Institute and Institute of Nuclear Power Operations examining the effect of pellet quality on the performance of nuclear fuel. ASTM International Committee C26 on Nuclear Fuel Cycle is addressing the topic of fuel pellets with a proposed…
-
A new ASTM International standard will provide paving contactors and producers with instructions for preparing cold mix asphalt samples for testing. The standard, D 7229 , Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor, was developed by Subcommittee D04.27 on Cold Mix Asphalts…
-
The rapid growth and variety of rides being developed within the water park industry has created a need for new standards to regulate the design and installation of water slides. While individual states within the United States had created rules and guidelines for water slides, these often varied greatly from each other. A new standard developed by ASTM International Committee F24 on Amusement…
-
ASTM International Committee C26 on Nuclear Fuel Cycle has approved two new standards, both under the jurisdiction of Subcommittee C26.05 on Methods of Test. All interested parties are invited to participate in the standards developing activities of Committee C26. ASTM International standards are available for purchase from Customer Service (phone: 610/832-9585; https://www.astm.org/contact )…, ASTM C 1637 , Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis, The approval of C 1637 is part of Subcommittee C26.05’s project involving the approach to keeping the analytical methodology used for determining specifications for nuclear materials up to date. This project began in 1990 when the subcommittee decided to develop separate standards from methods that were part of larger multi-methods materials specification standards. Once the new test methods…, ASTM C 1638 , Guide for the Determination of Iodine-129 in Uranium Oxide, Guide C 1638 covers the determination of iodine-129 in uranium oxide by gamma-ray spectrometry. Users may include U.S. Department of Energy sites that are dispositioning excess uranium to waste sites. Although there is no specification for the levels of I-129 in fuel, waste disposal sites may set limits due to the potential mobility of iodine in the environment. This guide may be used to ensure…
-
ASTM International Committee F24 on Amusement Rides and Devices currently has the following new proposed standards under development:, WK526 Netting, Subcommittee F24.24 on Design and Manufacture is currently developing WK526, Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh Used in Childrens Play Areas, Safety and Attractions. The purpose of the proposed standard is to reduce life-threatening and debilitating injuries associated with netted areas and attractions. "The amusement industry needed…, WK529 Water Slide Structures, Safety is at the heart of proposed new standard WK529, Guide for Classification, Design, Manufacture, Construction, and Operation of Water Slide Structures. The proposed standard, which is under the jurisdiction of Subcommittee F24.70 on Water Related Amusement Rides and Devices, will apply to water slides installed in public places such as water parks, hotels, resorts, and amusement parks.…, WK1074 Interactive Aquatic Play Equipment, In addition to WK529, Subcommittee F24.70 is also working on proposed new standard WK1074, Practice for Manufacture, Construction, Operations, Maintenance, and Water Quality of Interactive Aquatic Play Equipment. The proposed standard applies to interactive aquatic play equipment located in and around re-circulated and potable water, including swimming pools, activity pools, wave pools, lazy…