Search
Advanced search
Filter by category
Filter by committee
Search results
-
A proposed ASTM specification will fill a need for a standard ensuring that protective helmets, particularly those used in law enforcement, are tested consistently. Once approved, ASTM WK46152, Specification for Ballistic-Resistant Head Protection for Law Enforcement Applications, will provide law enforcement and other public safety agencies with a means of establishing minimum performance…, ASTM Committee E54 Next Meeting:, Jan. 26-28, 2015, January Committee Week, New Orleans, La., Technical Contact:, John Cronin, HP White Laboratory Inc., Cortland, N.Y., Phone: 603-933-3768; john.cronin@hpwhite.com, ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9633
-
Ballistic-resistant shields are essential to the safety of law enforcement officers, especially during active shooter incidents. A proposed new ASTM International standard, ASTM WK45341 , Test Method for Ballistic Resistant Shields, will be used to establish minimum performance requirements for this life-saving equipment. ASTM WK45341 falls under the jurisdiction of Subcommittee E54.04 on…, ASTM Committee E54 Next Meeting:, May 28-30, 2014, National Institute of Standards and Technology, Gaithersburg, Md., Technical Contact:, David Otterson, Ph.D., National Law Enforcement and Corrections Technology Center, Gaithersburg, Md., Phone: 301-240-6754; david.m.otterson@lmco.com , ASTM Staff Contact:, Rick Lake, 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9643
-
Specifications Present Baseline Requirements for Handheld and Stationary Point Chemical Vapor Detectors, Two new ASTM International specifications are the first standards to present baseline performance requirements for point chemical vapor detectors. The standards were developed as the result of a need recognized by the U.S. Department of Homeland Security for chemical, biological, radiological, nuclear and explosives detection capability, as well as the need to set standards so that manufacturers…, ASTM Committee E54 Next Meeting:, Jan. 27-29, 2014, January Committee Week, Houston, Texas, Technical Contact:, Pamela Chu, Ph.D., National Institute for Standards and Technology, Gaithersburg, Md., Phone: 301-975-2988; pamela.chu@nist.gov , ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9499
-
All interested parties are invited to participate in the standards developing activities of Subcommittee E07.11 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) , part of ASTM International Committee E07 on Nondestructive Testing . The subcommittee is focusing on developing standards that test the interoperability of DICONDE-compliant inspection equipment. DICONDE…, ASTM Committee E07 Next Meeting:, Jan. 26-30, 2014, Ft. Lauderdale, Fla, Technical Contact:, Patrick Howard, GE Aviation, Cincinnati, Ohio, Phone: 513-552-4646; patrick.howard@ge.com , ASTM Staff Contact:, Kathleen McClung, Phone: 610-832-9717; kmcclung@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9500
-
ASTM International is launching an initiative to develop a suite of standards for body armor worn by military and criminal justice personnel. This effort is being supported by the National Institute of Justice, the U.S. Army Program Executive Office – Soldier and the National Institute of Standards and Technology, who are working together to harmonize existing ASTM body armor standards,…, ASTM Committee E54 Next Meeting, : Jan. 27-29, 2014, January Committee Week, Houston, Texas, Technical Contact:, Cassy Robinson, NIST Standards Coordination Office, Gaithersburg, Md., Phone: 301-975-2546; casandra.robinson@nist.gov , ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9437
-
Methods of examining large girth gear teeth to detect surface breaking flaws have often been time-consuming and limited in terms of data collected. However, a new ASTM International standard provides a more effective method for gear examination using eddy current array, a technology that has been widely used but, until now, not standardized. ASTM E2905/E2905M , Practice for Examination of Mill…, ASTM Committee E07 Next Meeting:, June 2-6, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, Tom Shumka, Global Inspections-NDT, Inc., Kelowna, British Columbia, Canada, Phone: 250-762-5525; tom@global-ndt.ca, ASTM Staff Contact:, Kathleen McClung, Phone: 610-832-9717; kmcclung@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9374
-
Phased array probes are a recently developed technology that offers significant advantages in the detection, sizing and imaging of defects that can affect the structural components of airplanes, bridges, power plants and other critical areas. A new ASTM International standard describes testing that can be done on various arrays to ensure that all inspectors are using similar testing equipment.…, ASTM Committee E07 Next Meeting:, June 2-6, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, Michael Moles, Olympus NDT, Waltham, Mass., Phone: 416-831-4428; michael.moles@olympusndt, ASTM Staff Contact:, Kathleen McClung, Phone: 610-832-9717; kmcclung@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9299
-
Since the late 1970s, precast box sections have become an important component in the construction of culverts, storm drains and sewers, but there has not been a comprehensive standard for the installation of such sections. A new ASTM International standard fills this gap. ASTM C1675, Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains and…, Technical Contact:, Roman Selig, Hamilton Kent LLC, Birmingham, Ala., Phone: 205-910-0690; roman.selig@hamiltonkent.com, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9243
-
Load and resistance factor design methodology developed by the American Association of State Highway and Transportation Officials plays a key role in a proposed ASTM standard on the design of culverts and storm drains. ASTM WK38166 , Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains Designed According to AASHTO LRFD, is being…, Technical Contact:, Balaram K. Singh, P.E., Michigan Department of Transportation, Lansing, Mich., Phone: 517-335-2174; singhb@michigan.gov, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact, : Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9311
-
Taking into account the particular needs of people with disabilities is an important aspect of planning for a possible disaster and the aftermath of such an event. A proposed new ASTM International standard will provide planning guidance for helping those with disabilities in a disaster or emergency situation. The proposed new standard, ASTM WK37628 , Guide for Preparing for the Impact of…