Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new U.S. regulation incorporates ASTM International’s consumer safety performance standard for portable hook-on chairs for children aged six months to three years and under 37 pounds. This specification ( F1235 ), intended to improve the safety of portable hook-on chairs and prevent deaths and injury to young children, was referenced by the U.S. Consumer Product Safety Commission (CPSC) on…, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, ASTM Staff Contact:, Leonard Morrissey, tel +1.610.832.9719; lmorrissey@astm.org Release #10037
-
ASTM International and the Open Geospatial Consortium (OGC) will collaborate on developing and disseminating standards, best practices, and other tools that support the growing geospatial industry. The organizations plan to work together in areas such as data acquisition and dissemination, location-based services, and unmanned (autonomous) navigation. Daniel Smith, vice president, technical…, Media Inquiries:, Nathan Osburn, director, corporate communications, ASTM International, tel +1.610.832.9603, nosburn@astm.org or Denise McKenzie, executive director, communications & outreach, OGC, tel +1.314.546.4569, dmckenzie@opengeospatial.org, ASTM Staff Contact:, Pat Picariello, director, developmental operations, tel +1.610.832.9720; ppicariello@astm.org, OGC Staff Contact:, Scott Simmons, executive director, standards program, tel +1.970.682.1922; ssimmons@opengeospatial.org Release #10034
-
Richard P. Rosati, vice president of governmental affairs and industry standards at Bureau Veritas in Buffalo, N.Y., has been named chairman of ASTM International Committee F15 on Consumer Products . Formed in 1973, F15 includes 56 technical committees that oversee more than 100 standards related to the safety of consumer products including playground and athletic equipment, pool safety,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10035
-
A proposed ASTM guide will make it easier for businesses to create parts using additive manufacturing, also known as 3D printing. Specifically, the guide will provide overarching principles of design rules in this fast-growing field. “It is very hard to come up with a single ‘right way’ to create a part using additive manufacturing,” says ASTM member Paul Witherell, a mechanical engineer at the U…, ASTM Committee F42 on Additive Manufacturing Technologies Next Meeting:, Jan. 25-28, 2016, ASTM headquarters, West Conshohocken, Pa. , Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Paul Witherell, National Institute of Standards and Technology, Gaithersburg, Md., tel +1.301.975.5330; paul.witherell@nist.gov , ASTM Staff Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #9946
-
Today ASTM International announced that a new safety standard for labeling and packaging individually wrapped liquid-detergent laundry packets is on track for final approval on Sept. 15. The standard (F3159-15, Consumer Safety Specification for Liquid Laundry Packets) is aimed at reducing risks of ingestion, particularly by children. “This is a great example of how industry, consumer groups,…, ASTM Committee F15 Meeting:, Nov. 16-18, 2015, Tampa Marriott Waterside Hotel, Tampa, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contacts:, Rick Hackman, Associate Director, Technical External Relations, Procter & Gamble, tel +1.513.983.0534; hackman.rj@pg.com ; Carol Pollack-Nelson, Owner and Human Factors Psychologist, Independent Safety Consulting, tel +1.301.340.2912; pollacknel@comcast.net, ASTM Staff Contact:, Leonard Morrissey, tel +1.610.832.9719; lmorrissey@astm.org Release #9900
-
ASTM International Committee F42 on Additive Manufacturing Technologies is working on a standard that will be used to evaluate mechanical properties for additively manufactured materials. The standard (WK49229, Guide for Anisotropy Effects in Mechanical Properties of AM Parts) will serve as a guideline for using currently available standards for measuring mechanical properties, such as fracture…, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Mohsen Seifi, Case Western Reserve University, Cleveland, Ohio, tel +1.216.368.3711; mohsen.seifi@case.edu, ASTM Staff Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #9828 ###
-
An ASTM International standard will cover the emergence of infant sleep products with sleeping surfaces of greater than 10 degrees. The standard ( F3118 , Consumer Safety Specification for Infant Inclined Sleep Products) addresses issues such as maximum incline angles, side-to-side surface containment and side height requirements. The standard will establish safety performance requirements, test…, ASTM Committee F15 on Consumer Products Next Meeting:, Juvenile Products Subcommittees Meeting, Oct. 5-9, 2015, ASTM International headquarters, West Conshohocken, Pa., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Mike Steinwachs, Fisher-Price, East Aurora, N.Y., tel +1 716.687.3274; mike.steinwachs@fisher-price.com , ASTM Staff Contact:, Leonard Morrissey, tel +1.610.832.9719; lmorrissey@astm.org Release #9829 ###
-
A proposed new ASTM International standard will describe how to plan and conduct an interlaboratory study involving additive manufacturing processes or materials. The standard (WK49230, Guide for Conducting Round Robin Studies for Additive Manufacturing) will focus on how to manage a “round robin,” providing guidance for planning to ensure that process, logistics and tools are identified and…, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Shawn P. Moylan, Ph.D., National Institute of Standards and Technology, Gaithersburg, Md., tel +1.301.975.4352; shawn.moylan@nist.gov, ASTM Staff Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #9821 ###
-
The 2015 revision to an ASTM International standard that protects children from gasoline burns has been included in a final rule by the U.S. Consumer Product Safety Commission. The ruling was noted in the Federal Register on March 31 and became effective on April 12. The standard ( F2517 , Specification for Determination of Child Resistance of Portable Fuel Containers for Consumer Use) was first…, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Phil Monckton, Scepter Canada Inc., Toronto, Ontario, Canada, tel +1.416.751.9445; pmonckton@scepter.ca, ASTM Staff Contact:, Leonard Morrissey, tel +1.610.832.9719; lmorrissey@astm.org Release #9813 ###
-
An ASTM subcommittee is developing a new guide (WK48549, Specification for AMF Support for Solid Modeling: Voxel Information, Constructive Solid Geometry Representations and Solid Texturing) that will lead to better interoperability with the industry design format, and ultimately to retain higher quality information for three-dimensional prints. This will build on the subcommittee’s previous work…, Media Inquiries, : Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Jérémie Farret, Parallel Geometry Inc., Outremont, Quebec, Canada, tel +1.514.961.2375; jeremie.farret@llgeometry.com , ASTM Staff Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #9792 ###