Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard will be used to prevent fire and explosions on the decks of tank vessels used to transport hazardous products. ASTM F2876 , Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for Use in Hazardous Locations in Marine Applications, was developed by Subcommittee F25.07 on General Requirements, part of ASTM International Committee F25…, ASTM Committee F25 Next Meeting:, May 17-19, 2011, May Committee Week, Anaheim, Calif., Technical Contact:, James Lawrence, U.S. Coast Guard, Washington, D.C., Phone: 202-372-1382; james.d.lawrence@uscg.mil, ASTM Staff Contact:, Robert Morgan, Phone: 610-832-9732; rmorgan@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8787
-
Many ship owners and operators repair ship structures with temporary steel patches known as doublers. The U.S. Coast Guard and Navy, as well as other maritime authorities, usually allow such patches until the ship’s next inspection period, which can be as long as three to five years from the date of repair. Despite this situation, there is not currently a standard for repairing steel hull ships…, ASTM Committee F25 Next Meeting:, May 17-19, 2011, May Committee Week, Anaheim, Calif., Technical Contact:, Chao H. Lin, Maritime Administration, U.S. Department of Transportation, Washington, D.C., Phone: 202-366-1847; chao.lin@dot.gov, ASTM Staff Contact:, Robert Morgan, Phone: 610-832-9732; rmorgan@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8750
-
An international conference on Textiles – Light and Weatherfastness, will be held Jan. 21, 2011, in Mumbai, India. Sponsored by ASTM International, Atlas Material Testing Solutions and DyStar, this one-day conference will be held at the India Textile Committee Auditorium. This is the first textile industry conference ASTM has sponsored in India. The International Conference on Textiles will…, ASTM Contact:, Teresa Cendrowska, Phone: +1-610-832-9718; tcendrow@astm.org Release #8717
-
All interested parties are invited to participate in the development of a new standard, ASTM WK28289 , Guide for Design, Operation, Inspection and Maintenance of Oil Spill Response Vessels (OSRV). The proposed standard is being developed by Subcommittee F25.07 on General Requirements, part of ASTM International Committee F25 on Ships and Marine Technology. According to Thane Gilman, systems…
-
After completing an update of ASTM D123, Terminology Relating to Textiles, members of ASTM Subcommittee D13.92 on Terminology decided that the information contained in the annexes was sufficiently important to merit being in a separate standard. The new standard, ASTM D7641 , Guide for Textile Fibers, has now been published, and it provides a comprehensive guide to a large variety of fibers used…, ASTM Committee D13 Next Meeting:, Jan. 30-Feb. 2, 2011, January Committee Week, Baltimore, Md., Technical Contact:, Vincent Diaz, Atlantic Thread and Supply Co., Baltimore, Md., Phone: 410-687-9424; vince@atlanticthread.com, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8645
-
A proposed new standard from ASTM International Committee D13 on Textiles will be useful to those involved in the design and evaluation of garments that are meant to fit tight on the body. The proposed new standard, ASTM WK27572 , Test Method for Elastic/Stretch Properties of Textile Materials, is being developed by Subcommittee D13.59 on Fabric Test Methods, General. “Elongation using a…, ASTM Committee D13 Next Meeting:, June 6-9, June Committee Week, St. Louis, Mo., Technical Contact:, Kham Viengkham, Nike Inc., Beaverton, Ore., Phone: 503-671-6879; kham.viengkham@nike.com, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8561
-
A subcommittee of ASTM International Committee D13 on Textiles has recently changed its title and the scope of its work. Subcommittee D13.19 , previously on tire cord and fabrics, has been retitled D13.19 on Industrial Fabrics and Metallic Reinforcements. According to Dawn Caullwine, quality manager, DuPont Kevlar’s Cooper River facility, and chair of D13 as well as D13.19, the standards…, ASTM Committee D13 Next Meeting:, June 6-9, June committee week, St. Louis, Mo., Technical Contact:, Dawn Caullwine, DuPont, Moncks Corner, S.C., Phone: 848-797-9928; dawn.q.caullwine@usa.dupont.com, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8505/Feb2010
-
Rapid hardening hydraulic cements are used in a variety of applications in which reduced cementitious contents are desired or early service is needed. Included among these applications are paving, construction, stucco, mortar and block. A newly approved ASTM International standard covering these cements, ASTM C1600/C1600M , Specification for Rapid Hardening Hydraulic Cement, has been developed by…, Type URH, —ultra rapid hardening, for use where ultra high early strength is desired;, Type VRH, —very rapid hardening, for use where very high early strength is desired;, Type MRH, —medium rapid hardening, for use where mid-range rapid hardening, high early strength is desired; and, Type GRH, —general rapid hardening, for use when the higher strength properties of Type VRH or a Type MRH cement is not required. “ASTM C1600 lists minimum requirements for compressive strength, setting time, shrinkage and soundness (autoclave expansion),” says Hicks. “Optional specifications for sulfate expansion, alkali silicate reactions with aggregates, heat of hydration and expansion in water are also…
-
Side curtain airbags are usually mounted in the roof of a vehicle and burst through the headliner to cover the side window area in the event of a side impact or rollover accident. ASTM International Committee D13 on Textiles is currently developing a proposed new standard for the testing of such side curtain airbags, WK23227 , Test Method for Determining Pressure Decay of Inflatable Restraint…
-
New ASTM Committee E58 to Develop Standards That Support Engineering Investigations and Assist the Court, ASTM International, one of the largest voluntary standards development organizations (SDO) in the world, today announced the formation of ASTM Committee E58 on Forensic Engineering . Committee E58 will develop standards that promote awareness of the scientific, engineering, ethical and legal considerations inherent in forensic engineering investigations, reporting and testimony., Bringing Engineering Reason to the Dispute Resolution Process, Forensic engineering focuses on the investigation of alleged defects in materials, products, structures and components. These cases are litigated on the premise that the defects cause personal injury or damage to property. Forensic engineering investigations may help determine the causes of these events and assist the disputing parties or the court in resolving the case. Today, forensic…, Assisting the Court through Consensus Standards, ASTM Committee E58 comes together to create important standards and guides that will support the judicial process by facilitating an improved understanding of forensic engineering practices and associated technical issues. This will better enable the court to resolve disputes in a more well-informed and efficient manner, relying on deeper knowledge of the technical data presented and the sound…, E58 Standards: Guiding Forensic Engineering Practice, E58 standards will help guide forensic engineers in conducting investigations in a robust manner while protecting overall public safety. The initial scope of Committee E58 activities will be driven by subcommittees on Product Defect Incidents, Vehicular Incidents, Electrical Incidents and Industrial Processes. ASTM Committee E58 will build upon the body of work of former subcommittee E30.05 on…, Foundation Standard for the Forensic Engineering Profession, Other E58 standards will bolster the role of forensic engineering professionals in the eyes of the court and other users of these services. Consistent with this objective, Committee E58 has recently drafted a general practice document for the forensic engineering profession, titled Standard Guide for the Practice of Forensic Engineering. The goal of this standard is to further educate the court…