Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard will be used to prevent fire and explosions on the decks of tank vessels used to transport hazardous products. ASTM F2876 , Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for Use in Hazardous Locations in Marine Applications, was developed by Subcommittee F25.07 on General Requirements, part of ASTM International Committee F25…, ASTM Committee F25 Next Meeting:, May 17-19, 2011, May Committee Week, Anaheim, Calif., Technical Contact:, James Lawrence, U.S. Coast Guard, Washington, D.C., Phone: 202-372-1382; james.d.lawrence@uscg.mil, ASTM Staff Contact:, Robert Morgan, Phone: 610-832-9732; rmorgan@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8787
-
Many ship owners and operators repair ship structures with temporary steel patches known as doublers. The U.S. Coast Guard and Navy, as well as other maritime authorities, usually allow such patches until the ship’s next inspection period, which can be as long as three to five years from the date of repair. Despite this situation, there is not currently a standard for repairing steel hull ships…, ASTM Committee F25 Next Meeting:, May 17-19, 2011, May Committee Week, Anaheim, Calif., Technical Contact:, Chao H. Lin, Maritime Administration, U.S. Department of Transportation, Washington, D.C., Phone: 202-366-1847; chao.lin@dot.gov, ASTM Staff Contact:, Robert Morgan, Phone: 610-832-9732; rmorgan@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8750
-
All interested parties are invited to participate in the development of a new standard, ASTM WK28289 , Guide for Design, Operation, Inspection and Maintenance of Oil Spill Response Vessels (OSRV). The proposed standard is being developed by Subcommittee F25.07 on General Requirements, part of ASTM International Committee F25 on Ships and Marine Technology. According to Thane Gilman, systems…
-
Rapid hardening hydraulic cements are used in a variety of applications in which reduced cementitious contents are desired or early service is needed. Included among these applications are paving, construction, stucco, mortar and block. A newly approved ASTM International standard covering these cements, ASTM C1600/C1600M , Specification for Rapid Hardening Hydraulic Cement, has been developed by…, Type URH, —ultra rapid hardening, for use where ultra high early strength is desired;, Type VRH, —very rapid hardening, for use where very high early strength is desired;, Type MRH, —medium rapid hardening, for use where mid-range rapid hardening, high early strength is desired; and, Type GRH, —general rapid hardening, for use when the higher strength properties of Type VRH or a Type MRH cement is not required. “ASTM C1600 lists minimum requirements for compressive strength, setting time, shrinkage and soundness (autoclave expansion),” says Hicks. “Optional specifications for sulfate expansion, alkali silicate reactions with aggregates, heat of hydration and expansion in water are also…
-
Producers of fluorocarbons are invited to join in the ongoing standards developing activities of ASTM International Committee D26 on Halogenated Organic Solvents and Fire Extinguishing Agents. The committee has recently approved a new standard, ASTM D7509 , Specification for Fluorocarbon Feedstock Grade Chloroform, under the jurisdiction of Subcommittee D26.08 on Halogenated Organics Used as…
-
Finding ways to assure the quality and safe handling of fire extinguishing agents has led to the development of two new ASTM International standards, D 7323 , Practice for Handling, Transportation and Storage of IG-100 (Nitrogen), and D 7325 , Practice for Handling, Transportation and Storage of IG-541, N2, Ar, CO2. The new standards were developed by Subcommittee D26.09 on Fire Extinguishing…
-
A recently approved revision to ASTM International standard C 150 , Specification for Portland Cement, includes three significant technical changes to the document. The changes are part of a joint effort between ASTM and the American Association of State and Highway and Transportation Officials to harmonize C 150 with AASHTO’s standard, M 85, Specification for Portland Cement. C 150 is under the…
-
Providing users with an assurance of quality and ensuring the safe handling, transport and storage of fire extinguishing agents are the purposes of a new ASTM International standard, D 7327 , Specification for HFC Blend B (CH2FCF3, CHF2CF3 and CO2). The new standard was developed by Subcommittee D26.09 on Fire Extinguishing Agents, which is part of ASTM International Committee D26 on Halogenated…
-
An ASTM International task group on battery separator materials is currently working on the latest in a series of standards being developed for alkaline battery separators. The proposed new standard, WK13587 , Test Methods for Sampling and Testing Materials That Are Used for Alkaline Battery Separators, is under the jurisdiction of Subcommittee D09.19 on Dielectric Sheet and Roll Products, which…
-
Subcommittee D26.09 on Fire Extinguishing Agents is dedicated to developing standards that provide end users with an assurance of quality in fire extinguishing agents, as well as to ensure the safe handling, transport and storage of such agents. The subcommittee, which is under the jurisdiction of ASTM International Committee D26 on Halogenated Organic Solvents and Fire Extinguishing Agents, is…