Search
Advanced search
Filter by category
Filter by committee
Search results
-
Tribometers are used to assess the potential of humans to slip while walking on various surfaces. A new ASTM International test method will be used to provide a reference standard against which to validate and calibrate the performance of tribometers. ASTM F2508 , Practice for Validation and Calibration of Walkway Tribometers Using Reference Surfaces, has been developed by Subcommittee F13.10 on…
-
The importance of digital detector array technology is increasing as industry continues its transition from film radiography to the digital realm. Subcommittee E07.01 on Radiology (X and Gamma) Method, part of ASTM International Committee E07 on Nondestructive Testing, has recently approved the following three new standards that will aid users in the film-to-digital transition: • ASTM E2698 ,…
-
ASTM International Committee F13 on Pedestrian/Walkway Safety and Footwear is currently working on a proposed new standard for footwear designed for workers who do not necessarily need safety toe shoes but could use other protection such as puncture resistance, electrical shock protection and electrical grounding. The proposed new standard, ASTM WK27855 , Specification for Performance…
-
ASTM International Committee E07 on Nondestructive Testing has recently approved three new standards on phased arrays, polymer matrix composites for aerospace applications and digital imaging. The committee will be meeting in Plantation, Fla., on Jan. 24-28 and welcomes participation in its standards developing activities., Ultrasonic Methods, Thousands of portable phased array units, used for weld inspections, have now been sold worldwide. There are many benefits to these devices, including speed, cost, imaging, flexibility and setups, along with no radiation, licensing or contamination. Despite these advantages, there was not a universal inspection procedure for phased array inspection of welds. A new standard, E2700 , Practice for…, Specialized NDT Methods, A new guide gives an introductory overview that describes how mature and established nondestructive testing methods that are routinely used by industry are applied specifically to the characterization of polymer matrix aerospace composites. E2533 , Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications, is under the jurisdiction of Subcommittee E07.10 on…, Digital Imaging and Communication in Nondestructive Evaluation, A new standard developed by Subcommittee E07.11 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) will fill a need in the nondestructive testing industry for a transparent and industry standard data format with which to store digital inspection data. E2663 , Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods…, WK17435,, Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-Ray Computed Tomography (CT) Test Methods;, WK17436, , Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods;, WK20537, , Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current Test Methods; and, WK22505,, Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods. ASTM International standards can be purchased from Customer Service (phone: 610-832-9585; https://www.astm.org/contact/ ). ASTM International welcomes and encourages participation in the development of its standards. For more information on becoming an ASTM member, visit www.astm.…, ASTM Committee E07 Next Meeting:, Jan. 24-28 , Plantation, Fla., Technical Contacts: (E2700), Michael Moles, Olympus NDT, Waltham, Mass., Phone: 416-831-4428; michael.moles@olympusndt.com ;, (E2533), Jess Waller, NASA White Sands Facility, Las Cruces, N.M., Phone: 575-524-5249; jess.m.waller@nasa.gov ; , (E2663), Patrick Howard, GE Aviation, Cincinnati, Ohio, Phone: 513-552-4646; patrick.howard@ge.com, ASTM Staff Contact:, George Luciw, Phone: 610-832-9710; gluciw@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8431/Dec2009
-
A series of standards on nondestructive inspection and examination of aerospace composites has been developed under the jurisdiction of ASTM International Committee E07 on Nondestructive Testing. Several years ago, with impetus and input from representatives of the National Aeronautics and Space Administration, a task group on NDE for Aerospace Composites was formed under Subcommittee E07.10 on…
-
Rapid hardening hydraulic cements are used in a variety of applications in which reduced cementitious contents are desired or early service is needed. Included among these applications are paving, construction, stucco, mortar and block. A newly approved ASTM International standard covering these cements, ASTM C1600/C1600M , Specification for Rapid Hardening Hydraulic Cement, has been developed by…, Type URH, —ultra rapid hardening, for use where ultra high early strength is desired;, Type VRH, —very rapid hardening, for use where very high early strength is desired;, Type MRH, —medium rapid hardening, for use where mid-range rapid hardening, high early strength is desired; and, Type GRH, —general rapid hardening, for use when the higher strength properties of Type VRH or a Type MRH cement is not required. “ASTM C1600 lists minimum requirements for compressive strength, setting time, shrinkage and soundness (autoclave expansion),” says Hicks. “Optional specifications for sulfate expansion, alkali silicate reactions with aggregates, heat of hydration and expansion in water are also…
-
Nondestructive testing equipment manufacturers and users are invited to join a task group developing a proposed new ASTM standard, WK20537 , Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current Test Methods. The proposed practice, which will focus on test results storage and communication, will be based on a highly successful medical industry…
-
Honeycomb ceramics, porous with linear hollow channels, are being used worldwide in automotive catalytic converters and as diesel particulate filters for trucks. Flexural testing of this type of ceramics is addressed in a new ASTM International standard, ASTM C1674 , Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient…
-
New Advanced Ceramics Standards from ASTM Cover Fracture Mirror Size Analysis, Tensile Strength DataSubcommittee C28.01 on Mechanical Properties and Performance, part of ASTM International Committee C28 on Advanced Ceramics, has recently approved two new standards, ASTM C1678 , Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses, and ASTM C1683 , Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics., ASTM C1678 —Bringing Consistency to Fracture Mirror Size Analysis, Fracture mirror size analysis is a powerful quantitative tool for the interpretation of broken ceramic and glass articles. While this type of analysis can be used to determine the stress in a part at the instant of fracture, inspection and interpretation procedures have often varied, resulting in uncertainty in stress estimates. ASTM C1678, Practice for Fractographic Analysis of Fracture Mirror…, ASTM C1683 —Scaling Strength Values, ASTM C1683, Practice for Size Scaling of Tensile Strength Using Weibull Statistics for Advanced Ceramics, provides methodology to convert fracture strength parameters estimated from data obtained with one test geometry to strength parameters representing other test geometries. Stephen Duffy, chair of civil engineering, Cleveland State University, and C28 member, says that companies producing…
-
Ceramic and glass companies, as well as universities and government laboratories, will be the primary users of a new ASTM standard that allows for the flexural strength determination of components made in a round shape or after finish machining with minimal waste. The standard, ASTM C1684 , Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature-Cylindrical Rod Strength, was…