Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International Committee D15 on Engine Coolants has formed three new subcommittees: Subcommittees D15.22 on Non-Aqueous Coolants ; D15.25 on Diesel Exhaust Fluid ; and D15.30 on Industrial Heat Transfer Fluids . All interested parties are invited to join in the standards developing activities of these new subcommittees., D15.22, Non-Aqueous Coolants, While there has been an increased interest in non-aqueous coolants industry, there are no current ASTM standards in this area. D15.22 will begin to develop such standards. “The envisioned standards for non-aqueous coolants would be performance standards, rather than ingredient standards, to allow for formulations that are not currently proprietary,” says Jonathan T. Light, chief engineer, Evans…, D15.25, Diesel Exhaust Fluid, Diesel exhaust fluid, often referred to as DEF, is required by many diesel engine-powered vehicles delivered after January 2010. More recent environmental standards issued by the U.S. Environmental Protection Agency have created more stringent emissions standards for agricultural, construction and forestry equipment. DEF is used to reduce nitrogen oxide emissions, which allows original equipment…, D15.30, Industrial Heat Transfer Fluids, Members of D15 recognized that changes in the antifreeze industry, including new manufacturing technologies, improved inhibitor chemistries and recycling technologies, would likely be adapted to the facilities industry as a natural course of innovation. Because D15 has experience developing standards that are technically similar to the facilities heat transfer industry, it was deemed appropriate…, ASTM Committee D15 Next Meeting:, May 17-18, May Committee Week, Anaheim, Calif., Technical Contact:, (D15.22) Jonathan T. Light, Evans Cooling Systems Inc., Sharon, Conn., Phone: 860-435-2418; jtlight@comcast.net ; (D15.25) Edward Eaton Sr., Amalgatech, Phoenix, Ariz., Phone: 602-252-0280; edeaton@amalgatech.com ; (D15.30) John Panasewicz, Clear Choice Antifreeze, Henderson, Colo., Phone: 303-227-9900; johnp@clearchoiceantifreeze.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8837
-
A new ASTM subcommittee seeks to acknowledge the ongoing advances being made in the field of nanostructured inorganic coatings. B08.16 on Nanostructured Coatings, part of ASTM International Committee B08 on Metallic and Inorganic Coatings, is currently developing its first proposed standard, ASTM WK29468 , Specification for Galvanic Protection of Steel Using a Nanostructured Coating of 95 % Zinc…
-
The importance of digital detector array technology is increasing as industry continues its transition from film radiography to the digital realm. Subcommittee E07.01 on Radiology (X and Gamma) Method, part of ASTM International Committee E07 on Nondestructive Testing, has recently approved the following three new standards that will aid users in the film-to-digital transition: • ASTM E2698 ,…
-
Two new ASTM International standards on rescue litters and fixed anchorages will contribute to the safety and efficiency of search and rescue operations. Both standards were developed by Subcommittee F32.01 on Equipment, Testing and Maintenance, part of ASTM International Committee F32 on Search and Rescue., BASKET TYPE RESCUE LITTERS, Until the development of ASTM F2821 , Test Methods for Basket Type Rescue Litters, there had not been a standardized means for manufacturers to test these rescue devices, according to John McKently, Los Angeles County Sheriff's Department, and an F32 member. “ASTM F2821 was developed because there was no standard available that allowed manufacturers to test litter products in the same way,” says…, FIXED ANCHORAGES, According to McKently, the impetus for the development of ASTM F2822 , Specification for Fixed Anchorages Installed on Structures Used for Rope Rescue Training, was similar to that of ASTM F2821. In this case, the standard was developed to provide minimum strength requirements for anchorages permanently installed or attached to training towers or other structures used for rope rescue training. “…, ASTM Committee F32 Next Meeting:, Nov. 7-10, in conjunction with the International Technical Rescue Symposium, Golden, Colo., Technical Contact:, John McKently, Los Angeles County Sheriff's Department, Glendale, Calif., Phone: 818-247-3209; jmckently@earthlink.net, ASTM Staff Contact:, Thomas O'Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8654
-
A series of proposed new standards being developed by ASTM International Committee D15 on Engine Coolants would remove technical barriers that currently prevent the cost-effective replacement of ethylene glycol with more environmentally friendly glycerin in antifreeze. The proposed standards are under the jurisdiction of Subcommittee D15.93 on Research and Long Range Planning. Natural glycerin is…
-
ASTM International Committee E07 on Nondestructive Testing has recently approved three new standards on phased arrays, polymer matrix composites for aerospace applications and digital imaging. The committee will be meeting in Plantation, Fla., on Jan. 24-28 and welcomes participation in its standards developing activities., Ultrasonic Methods, Thousands of portable phased array units, used for weld inspections, have now been sold worldwide. There are many benefits to these devices, including speed, cost, imaging, flexibility and setups, along with no radiation, licensing or contamination. Despite these advantages, there was not a universal inspection procedure for phased array inspection of welds. A new standard, E2700 , Practice for…, Specialized NDT Methods, A new guide gives an introductory overview that describes how mature and established nondestructive testing methods that are routinely used by industry are applied specifically to the characterization of polymer matrix aerospace composites. E2533 , Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications, is under the jurisdiction of Subcommittee E07.10 on…, Digital Imaging and Communication in Nondestructive Evaluation, A new standard developed by Subcommittee E07.11 on Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) will fill a need in the nondestructive testing industry for a transparent and industry standard data format with which to store digital inspection data. E2663 , Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods…, WK17435,, Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-Ray Computed Tomography (CT) Test Methods;, WK17436, , Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods;, WK20537, , Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current Test Methods; and, WK22505,, Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods. ASTM International standards can be purchased from Customer Service (phone: 610-832-9585; https://www.astm.org/contact/ ). ASTM International welcomes and encourages participation in the development of its standards. For more information on becoming an ASTM member, visit www.astm.…, ASTM Committee E07 Next Meeting:, Jan. 24-28 , Plantation, Fla., Technical Contacts: (E2700), Michael Moles, Olympus NDT, Waltham, Mass., Phone: 416-831-4428; michael.moles@olympusndt.com ;, (E2533), Jess Waller, NASA White Sands Facility, Las Cruces, N.M., Phone: 575-524-5249; jess.m.waller@nasa.gov ; , (E2663), Patrick Howard, GE Aviation, Cincinnati, Ohio, Phone: 513-552-4646; patrick.howard@ge.com, ASTM Staff Contact:, George Luciw, Phone: 610-832-9710; gluciw@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8431/Dec2009
-
A series of standards on nondestructive inspection and examination of aerospace composites has been developed under the jurisdiction of ASTM International Committee E07 on Nondestructive Testing. Several years ago, with impetus and input from representatives of the National Aeronautics and Space Administration, a task group on NDE for Aerospace Composites was formed under Subcommittee E07.10 on…
-
ASTM International Committee F32 on Search and Rescue is currently developing a number of proposed new standards. Two of the proposed standards under the jurisdiction of Subcommittee F32.02 on Management and Operations are WK23984 , Guide for Level 1 (Basic) Mounted Search and Rescue (MSAR) Responder, and WK24699, Guide for Training for Land SAR as a Level 1 Out of Area Disaster Responder.…
-
The importance of telecommunicators in the search and rescue field cannot be overstated. Dispatchers receiving and delivering accurate information in a timely manner are critical to any SAR operation. A new standard developed by ASTM International Committee F32 on Search and Rescue highlights the importance of proper training for SAR dispatchers. The standard, ASTM F2662 , Guide for Minimum…
-
Nondestructive testing equipment manufacturers and users are invited to join a task group developing a proposed new ASTM standard, WK20537 , Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current Test Methods. The proposed practice, which will focus on test results storage and communication, will be based on a highly successful medical industry…