Search
Advanced search
Filter by category
Filter by committee
Search results
-
A proposed ASTM specification will fill a need for a standard ensuring that protective helmets, particularly those used in law enforcement, are tested consistently. Once approved, ASTM WK46152, Specification for Ballistic-Resistant Head Protection for Law Enforcement Applications, will provide law enforcement and other public safety agencies with a means of establishing minimum performance…, ASTM Committee E54 Next Meeting:, Jan. 26-28, 2015, January Committee Week, New Orleans, La., Technical Contact:, John Cronin, HP White Laboratory Inc., Cortland, N.Y., Phone: 603-933-3768; john.cronin@hpwhite.com, ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9633
-
Ballistic-resistant shields are essential to the safety of law enforcement officers, especially during active shooter incidents. A proposed new ASTM International standard, ASTM WK45341 , Test Method for Ballistic Resistant Shields, will be used to establish minimum performance requirements for this life-saving equipment. ASTM WK45341 falls under the jurisdiction of Subcommittee E54.04 on…, ASTM Committee E54 Next Meeting:, May 28-30, 2014, National Institute of Standards and Technology, Gaithersburg, Md., Technical Contact:, David Otterson, Ph.D., National Law Enforcement and Corrections Technology Center, Gaithersburg, Md., Phone: 301-240-6754; david.m.otterson@lmco.com , ASTM Staff Contact:, Rick Lake, 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9643
-
Specifications Present Baseline Requirements for Handheld and Stationary Point Chemical Vapor Detectors, Two new ASTM International specifications are the first standards to present baseline performance requirements for point chemical vapor detectors. The standards were developed as the result of a need recognized by the U.S. Department of Homeland Security for chemical, biological, radiological, nuclear and explosives detection capability, as well as the need to set standards so that manufacturers…, ASTM Committee E54 Next Meeting:, Jan. 27-29, 2014, January Committee Week, Houston, Texas, Technical Contact:, Pamela Chu, Ph.D., National Institute for Standards and Technology, Gaithersburg, Md., Phone: 301-975-2988; pamela.chu@nist.gov , ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9499
-
ASTM International is launching an initiative to develop a suite of standards for body armor worn by military and criminal justice personnel. This effort is being supported by the National Institute of Justice, the U.S. Army Program Executive Office – Soldier and the National Institute of Standards and Technology, who are working together to harmonize existing ASTM body armor standards,…, ASTM Committee E54 Next Meeting, : Jan. 27-29, 2014, January Committee Week, Houston, Texas, Technical Contact:, Cassy Robinson, NIST Standards Coordination Office, Gaithersburg, Md., Phone: 301-975-2546; casandra.robinson@nist.gov , ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9437
-
Each year thousands of children are brought to hospital emergency rooms after ingesting medicine they’ve gained access to on their own. The PROTECT Initiative, led by the Centers for Disease Control and Prevention, brings together public and private partners to help keep children safe from unintentional medication overdoses. A key activity of PROTECT has been to encourage development and…, ASTM Subcommittee D10.32 Next Meeting:, Aug. 20, 2013, 2:00 p.m. Contact Diane Trinsey, ASTM International, for more information., Technical Contact:, Dan Budnitz, Centers for Disease Control and Prevention, Atlanta, Ga., Phone: 404-639-4096; dbudnitz@cdc.gov , ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9423
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375
-
All interested parties are welcome to join in the ongoing revisions to ASTM D3953 , Specification for Strapping, Flat Steels and Seals. The standard is under the jurisdiction of Subcommittee D10.25 on Palletizing and Unitizing of Loads , part of ASTM International Committee D10 on Packaging . According to its scope, ASTM D3953 covers flat steel strapping and seals intended for use in closing,…, ASTM Committee D10 Next Meeting:, April 15-17, 2013, April Committee Week, Indianapolis, Ind., Technical Contact:, Anthony Mariano, Independent Metal Strap Co. Inc., East Hill, N.Y., Phone: 516-621-0030; amariano@indmetalstrap.com, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9309
-
All interested parties, particularly end users, resin manufacturers and film converters, are invited to participate in the revision of ASTM International standard ASTM D4649 , Guide for Selection and Use of Stretch Wrap Films. The standard is being updated by Subcommittee D10.25 on Palletizing and Unitizing of Loads , part of ASTM International Committee D10 on Packaging . ASTM D4649 covers…, ASTM Committee D10 Next Meeting:, April 14-17, 2013, April Committee Week, Indianapolis, Ind., Technical Contact:, James V. Bisha, Ph.D., Ongweoweh Corp, Cayuga Heights, N.Y., Phone: 607-266-7070; jbisha@ongweoweh.com, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindler@astm.org Release #9287
-
Taking into account the particular needs of people with disabilities is an important aspect of planning for a possible disaster and the aftermath of such an event. A proposed new ASTM International standard will provide planning guidance for helping those with disabilities in a disaster or emergency situation. The proposed new standard, ASTM WK37628 , Guide for Preparing for the Impact of…
-
Physical barrier systems are an important component in protecting high security assets, and the demand for barrier products has intensified. The capability and integrity of these systems must be verified through testing, and ensured through manufacturing and installation compliance with minimum standard requirements for compatibility with tested designs. In order to facilitate this compliance…