Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard could help both with contingency planning for oil spills as well as management of oil spills. According to ASTM International member Merv Fingas, the new guide standardizes the way laboratories both prepare and measure “weathered oil,” which is naturally different from the “source oil” at a facility. “This is important because, after an oil spill occurs, the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org Release #10771
-
ASTM International’s bioenergy and industrial-chemicals-from-biomass committee ( E48 ) is creating a standard that will help companies that produce biofuel using – in part – kernel fiber. This fiber was approved as a “cellulosic feedstock” by the U.S. Environmental Protection Agency in 2014. As such, renewable biofuel that is produced using kernel fiber as a feedstock can qualify as cellulosic…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10634
-
Members of ASTM International recently revised a key test method ( D1613 ) that has been used to measure the acidity of fuel ethanol and denatured fuel ethanol, including ethanol used for car gasoline blends. By including a new “nitrogen purge” as part of the test method, a laboratory can help ensure that carbon dioxide is removed. According to ASTM International member Shon Van Hulzen, the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Karen Murphy, tel +1.610.832.9525; kmurphy@astm.org Release #10521
-
A new ASTM International test method will help determine the carbonyl content of thermochemically derived bio-oils. Carbonyls contribute to instability during storage and processing of bio-oils. “This new standard provides a simple way to measure carbonyl content. This can help determine the quality of a bio-oil that will undergo further upgrading to fuels and chemicals,” says ASTM member Earl…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10518
-
After two successful pilots, ASTM International, a global standards organization, is expanding its Emerging Professionals program . The program will provide free airfare and lodging this year for up to 24 participants to attend a leadership development workshop held during an ASTM International conference – “committee week” – where technical experts in their industries create and revise…, ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org , Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org R elease #10276
-
John Fletcher, technical support manager for Elcometer Limited in Manchester, United Kingdom, will serve a three-year term on the ASTM International board of directors. Fletcher is based in Manchester, UK but represents Elcometer Inc. at ASTM meetings. Elcometer is a world leader in the design, manufacture, and supply of coating and concrete inspection equipment, rebar, and metal detection and…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10238
-
A first-of-its-kind standard from ASTM International aims to support the introduction of ethanol as a cooking fuel, a step which will help people in developing countries access and use a safer alternative to wood, charcoal, and other traditional fuels. Each year, millions of people get sick or die due to household air pollution from cooking with traditional fuels, according to ASTM member Brady…, ASTM Committee E48 on Bioenergy and Industrial Chemicals and Biomass Next Meeting:, June 29, 2016, Bellevue, Wash., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Brady Luceno, POET Clean Cooking, Sioux Falls, S.D., +1.605.965.6702; brady.luceno@poet.com , ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10017
-
A new ASTM test method will provide a simple and effective way to determine the tensile (pulling) and compressive (pushing) stress for metallic coatings used on a wide range of consumer products such as pens, doorknobs, lamps, cars, jewelry and more. The standard will also be used in the automotive, aerospace and military industries, particularly by companies that create metallic layers for parts…, ASTM Committee B0 8 on Metallic and Inorganic Coatings Next Meeting:, May 5, 2016, May Committee Week, San Antonio, Texas, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Frank H. Leaman, Specialty Testing and Development Company Inc., York, Pa., tel +1.717.891.4989; fleaman@specialtytest.com , ASTM Staff Contact:, Diane Lake, tel +1.610.832.9661; dlake@astm.org Release #9964
-
A new ASTM International standard will help oil spill responders evaluate the stability of water-in-oil mixtures. Specifically, the new standard (soon to be published as F3045, Test Method for the Evaluation of the Stability of Water-in-Oil Mixtures Formed from Crude Oil and Petroleum Products Mixed with Saline Water) provides a laboratory test method to determine the tendencies of emulsions and…, ASTM Committee F20 on Hazardous Substances and Oil Spill Response Next Meeting, : Oct. 25-26, 2016, October Committee Week, Orlando, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Mervin Fingas, Edmonton, Alberta, Canada, tel +1.780.989.6059; fingasmerv@shaw.ca , ASTM Staff Contact:, Jeffrey Adkins, tel +1.610.832.9738; jadkins@astm.org Release #9936
-
A new ASTM standard tests the potential of a pressurized aerosol product to be accidentally inhaled and aspirated (drawn into the respiratory tract of those near the spraying). The standard ( D7952 , Test Method for Measuring Aspiration Potential of Aerosol Products) specifically tests aspiration potential by determining spray pattern and aerosol deposition rates. Aspiration can potentially cause…, STM Committee D01 on Paint and Related Coatings, Materials and Applications Next Meeting:, June 21-23, 2015, Ft. Lauderdale, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Woodhall Stopford, Duke University Medical Center, Durham, N.C., tel +1.919.732.7442; woodhall.stopford@duke.edu, ASTM Staff Contact:, Jeffrey Adkins, tel +1.610.832.9738; jadkins@astm.org Release #9835 ###