Search
Advanced search
Filter by category
Filter by committee
Search results
-
Edward R. Eaton, Sr., fluids consultant with Laboratory Holdings LLC, in Litchfield Park, Arizona, USA, was honored with the Daniel H. Green Award from ASTM International committee on engine coolants ( D15 ). Eaton joined ASTM in 1992, and was honored for many years of outstanding service and active participation in the work of the committee. Eaton has previously served as the CEO and chief…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10427
-
After two successful pilots, ASTM International, a global standards organization, is expanding its Emerging Professionals program . The program will provide free airfare and lodging this year for up to 24 participants to attend a leadership development workshop held during an ASTM International conference – “committee week” – where technical experts in their industries create and revise…, ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org , Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org R elease #10276
-
A new ASTM International specification supports the use of waterless coolants in car engines. Waterless coolants avoid the creation of water vapor pockets that can interrupt heat transfer from critical areas of an engine, helping prevent engine damage, enhance consumer safety, and more. According to ASTM International member Jonathan T. Light, non-aqueous engine coolants that conform to the new…, ASTM Committee D15 on Engine Coolants and Related Fluids Next Meeting:, May 17-18, 2017, Phoenix, Ariz., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Jonathan T. Light, Evans Cooling Systems, Inc., Suffield, Conn., tel +1.860.435.2418; jtlight@comcast.net, ASTM Staff Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #10255
-
A new ASTM International standard for heat transfer fluids will help create more efficient heating and air conditioning systems. The new standard (soon to be published as D8039, Specification for Freeze Point Depressed Heating and Air Conditioning (HVAC) Heat Transfer Fluids (HTF)) was developed by ASTM’s Committee on Engine Coolants and Related Fluids ( D15 ). Heat transfer fluids used in the…, D15 on Engine Coolants and Related Fluids Future Meeting:, Oct. 19-20, Dearborn, Michigan, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Edward R. Eaton Sr., Amalgatech, Phoenix, Ariz., tel +1.602.252.0280; edeaton@amalgatech.com , ASTM Staff Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org Release #10188
-
Yesterday, ASTM International Committee E15 on Industrial and Specialty Chemicals voted to merge into ASTM Committee D16 on Aromatic Hydrocarbons and Related Chemicals. “Merging these two important committees will help consolidate chemical industry expertise in standards development, providing a one-stop shop for many stakeholders worldwide who use these crucial standards,” said Daniel Smith,…, ASTM Committee D16 on Aromatic Hydrocarbons and Related Chemicals Next Meeting:, Feb. 1-2, 2017, January Committee Week, Norfolk, Va. , Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, ASTM Staff Contact:, Kristy Straiton, tel +1.610.832.9640; kstraiton@astm.org Release #10126
-
ASTM International has fully redesigned its International Laboratory Directory, the only directory in the world dedicated to helping manufacturers find the right labs to test their products. Independent laboratories throughout the world rely on thousands of standards and test methods, including many developed by ASTM International. By working with these labs, manufacturers can help ensure that…, Contact:, Anna Spektor, tel +1.610.832.9756; aspektor@astm.org, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10110
-
A new ASTM International test method will help improve the measurements of uranium isotope ratios, helping laboratories analyze nuclear material and supporting efforts of organizations like the International Atomic Energy Agency (IAEA). The new standard is C1832 , Test Method for Determination of Uranium Isotopic Composition by the Modified Total Evaporation (MTE) Method Using a Thermal…, ASTM Committee C26 on Nuclear Fuel Cycle Next Meeting:, June 12-17, 2016, Vienna, Austria, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Stephan Richter, Institute for Reference Materials and Measurements; tel +32.14.571.701; stephan.richter@ec.europa.eu, ASTM Staff Contact:, Joe Koury, tel +1.610.832.9804; jkoury@astm.org Release #10002
-
A new ASTM test method will provide a simple and effective way to determine the tensile (pulling) and compressive (pushing) stress for metallic coatings used on a wide range of consumer products such as pens, doorknobs, lamps, cars, jewelry and more. The standard will also be used in the automotive, aerospace and military industries, particularly by companies that create metallic layers for parts…, ASTM Committee B0 8 on Metallic and Inorganic Coatings Next Meeting:, May 5, 2016, May Committee Week, San Antonio, Texas, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Frank H. Leaman, Specialty Testing and Development Company Inc., York, Pa., tel +1.717.891.4989; fleaman@specialtytest.com , ASTM Staff Contact:, Diane Lake, tel +1.610.832.9661; dlake@astm.org Release #9964
-
A proposed ASTM International standard will provide best practices for companies that coat pipe with porcelain enamel (glass) lining. Such lining has been used in municipal wastewater, sewage treatment and other water-related industries since the 1960s. Subcommittee B08.12 on Materials for Porcelain Enamel and Ceramic-Metal Systems is developing the standard. Porcelain enamel lining acts as a…, ASTM Committee B08 on Metallic and Inorganic Coatings Next Meeting:, Nov. 18-19, 2015, November Committee Week, Tampa, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Charles Baldwin, Ferro Corp., tel +1.216.875.6204; charles.baldwin@ferro.com, ASTM Staff Contact:, Diane Lake, tel +1.610.832.9661; dlake@astm.org Release #9827 ###
-
A new ASTM International standard determines polymer content in alpha-methylstyrene (AMS), a raw material used in the production of a variety of consumer products. AMS manufacturers and those who use AMS as a raw material will be the primary beneficiaries of the new standard (soon to be published as D7977, Test Method for Polymer Content of a-Methylstyrene (AMS)). In addition, third party…, ASTM Committee D16 on Aromatic Hydrocarbons and Related Chemicals Next Meeting:, June 24-25, 2015, in conjunction with ASTM D02 committee meeting, Ft. Lauderdale, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Scott Keenan, Ph.D., tel +1.215.537.2434; scott.keenan2@honeywell.com, ASTM Staff Contact:, Kristy Straiton, tel +1.610.832.9640; kstraiton@astm.org Release #9798 ###