Search
Advanced search
Filter by category
Filter by committee
Search results
-
Rapid hardening hydraulic cements are used in a variety of applications in which reduced cementitious contents are desired or early service is needed. Included among these applications are paving, construction, stucco, mortar and block. A newly approved ASTM International standard covering these cements, ASTM C1600/C1600M , Specification for Rapid Hardening Hydraulic Cement, has been developed by…, Type URH, —ultra rapid hardening, for use where ultra high early strength is desired;, Type VRH, —very rapid hardening, for use where very high early strength is desired;, Type MRH, —medium rapid hardening, for use where mid-range rapid hardening, high early strength is desired; and, Type GRH, —general rapid hardening, for use when the higher strength properties of Type VRH or a Type MRH cement is not required. “ASTM C1600 lists minimum requirements for compressive strength, setting time, shrinkage and soundness (autoclave expansion),” says Hicks. “Optional specifications for sulfate expansion, alkali silicate reactions with aggregates, heat of hydration and expansion in water are also…
-
Manufacturers of toluene, mixed xylenes and p-xylene are often required to determine the type and amount of impurities that remain from manufacture. A new ASTM International standard, D7504 , Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number, can now be used as an internal quality control tool where these products are produced…
-
New ASTM Committee E58 to Develop Standards That Support Engineering Investigations and Assist the Court, ASTM International, one of the largest voluntary standards development organizations (SDO) in the world, today announced the formation of ASTM Committee E58 on Forensic Engineering . Committee E58 will develop standards that promote awareness of the scientific, engineering, ethical and legal considerations inherent in forensic engineering investigations, reporting and testimony., Bringing Engineering Reason to the Dispute Resolution Process, Forensic engineering focuses on the investigation of alleged defects in materials, products, structures and components. These cases are litigated on the premise that the defects cause personal injury or damage to property. Forensic engineering investigations may help determine the causes of these events and assist the disputing parties or the court in resolving the case. Today, forensic…, Assisting the Court through Consensus Standards, ASTM Committee E58 comes together to create important standards and guides that will support the judicial process by facilitating an improved understanding of forensic engineering practices and associated technical issues. This will better enable the court to resolve disputes in a more well-informed and efficient manner, relying on deeper knowledge of the technical data presented and the sound…, E58 Standards: Guiding Forensic Engineering Practice, E58 standards will help guide forensic engineers in conducting investigations in a robust manner while protecting overall public safety. The initial scope of Committee E58 activities will be driven by subcommittees on Product Defect Incidents, Vehicular Incidents, Electrical Incidents and Industrial Processes. ASTM Committee E58 will build upon the body of work of former subcommittee E30.05 on…, Foundation Standard for the Forensic Engineering Profession, Other E58 standards will bolster the role of forensic engineering professionals in the eyes of the court and other users of these services. Consistent with this objective, Committee E58 has recently drafted a general practice document for the forensic engineering profession, titled Standard Guide for the Practice of Forensic Engineering. The goal of this standard is to further educate the court…
-
Chemical plants and contract and research laboratories will all be likely users of a new ASTM International standard, D 7183 , Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence. D 7183 was developed by Subcommittee D16.04 on Instrumental Analysis, part of ASTM International Committee D16 on Aromatic Hydrocarbons and Related…
-
A recently approved revision to ASTM International standard C 150 , Specification for Portland Cement, includes three significant technical changes to the document. The changes are part of a joint effort between ASTM and the American Association of State and Highway and Transportation Officials to harmonize C 150 with AASHTO’s standard, M 85, Specification for Portland Cement. C 150 is under the…
-
ASTM International Committee B08 on Metallic and Inorganic Coatings has recently approved a revision of one of its most important standards, B 633 , Specification for Electrodeposited Coatings of Zinc on Iron and Steel. B 633 is under the jurisdiction of Task Group B08.08.04 on Soft Metals, which is part of Subcommittee B08.08 on Metallic Coatings. Zinc coatings are used to provide a sacrificial…
-
If you are a user of ASTM B 456, Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nick Plus Chromium, ASTM International Committee B08 on Metallic and Inorganic Coatings would like to hear from you. B 456 is under the jurisdiction of Subcommittee B08.08.03 on Decorative Coatings. "Subcommittee B08.08.03 has received reports that some users are experiencing…
-
After a 35-year-absence, the natural cement industry is being revived and, along with it, a long-withdrawn ASTM International standard. Until it closed in 1970, the Century Cement Company in Rosendale, N.Y. was the last company to manufacture natural cement. Up to that point, Rosendale had been the center of the industry, the source of more than half of all natural cement produced in the U.S.…
-
A new test method developed by ASTM International Committee C01 on Cement provides information about the behavior of cement that can be used in the process of selecting cementing materials for specific applications. The standard, C 1608, Test Method for Chemical Shrinkage of Hydraulic Cement Pastes, is under the jurisdiction of Subcommittee C01.31 on Volume Change. Test Method C 1608 was…
-
ASTM International standard D 1555, Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane, and its metric equivalent, D 1555M, have been revised by Committee D16 on Aromatic Hydrocarbons and Related Chemicals. The revision affects the basis for correcting volume from any temperature to 60 F (or 15 C using D 1555M), as well as calculating the weight…