Search
Advanced search
Filter by category
Filter by committee
Search results
-
Activated carbon is processed to have small, low-volume pores that increase the surface area available for adsorption. It has applications in the medical, environmental and energy realms, among others. Since 1962, ASTM International Committee D28 on Activated Carbon has developed standards that play a pre-eminent role in how activated carbon is used. A D28 subcommittee, D28.02 on Liquid Phase…, WK47401, Xylenol Orange Dye, The xylenol orange dye test is a way to determine the relative adsorption rate of unused or reactivated carbons by adsorption of xylenol orange from aqueous solution. This is an important means for deciding which type of activated carbon to use to a specific water treatment application. “Activated carbon performance can roughly be defined as a combination of the ability to adsorb a particular…, WK47421, Particle Size Distribution, Mercury flue gas, home water filters and potable water treatment are the main applications in which powdered and fine mesh carbons are used. A proposed new test method will describe how a laser light scattering technique can determine the particle size distribution of fine mesh activated carbon. ASTM member Neal Megonnell, vice president, sales and marketing, Haycarb USA, says the proposed test…, ASTM Committee D28 Next Meeting:, April 27, April Committee Week, Anaheim, Calif., Technical Contact:, (WK47401) Adam Redding, Ph.D., Evoqua Water Technologies LLC, Northwest, Pa., tel +1.724.719.0805; adam.redding@evoqua.com and (WK47421) Neal E. Megonnell, Haycarb USA, Pittsburgh, Pa., tel +1.412.709.7487; neal@haycarbusa.com, ASTM Staff Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9731
-
Proper packaging procedures are an important aspect of any industry. Now ASTM International Committee F02 on Flexible Barrier Packaging has developed a standard for a relatively new packaging technology, airborne ultrasound. ASTM F3004 , Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound, was developed by Subcommittee F02.40 on Package Integrity . “Airborne…, ASTM Committee F02 Next Meeting:, April 7-9, 2014, Lansing, Mich., Technical Contact:, Oliver Stauffer, PTI Inspection Systems, Tuckahoe, N.Y., Phone: 914-337-2005; o.stauffer@ptiusa.com , ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9566
-
Recent changes in technology are now covered in a significant ASTM International standard used to measure the particle size of metal powders. The standard, ASTM B330 , Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability, is under the jurisdiction of Subcommittee B09.03 on Refractory Metal Powders , part of ASTM International Committee…, ASTM Committee B09 Next Meeting:, April 14-16, 2014, Hollywood, Fla., Technical Contact:, Frank Venskytis, Clayton, N.C., Phone: 919-553-8050; fvastm@embarqmail.com , ASTM Staff Contact:, Katerina Koperna, Phone: 610-832-9728; kkoperna@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9544
-
ASTM International Committee F02 on Flexible Barrier Packaging will hold its next meeting on Sept. 26-27, 2012, at the Hotel Rey Juan Carlos I in Barcelona, Spain. At this meeting, participants will have the opportunity to contribute to the development and revision of a number of standards important to the use and evaluation of flexible barrier packaging. One of the highlights of the meeting will…, Future Trends in Permeation Measurements, , presented by Franz Sturm, Lipke •, U.S. FDA Perspective: The Use of Standards in Premarket Submissions and Auditing the Medical Device Packaging Process, , presented by Pat Weixel, U.S. Food and Drug Administration •, Microbial Barrier Test Methods for Porous Sterile Barrier Materials, , presented by Thierry Wagner, DuPont Medical and Pharmaceutical Protection •, Toward a Package Durability Predictive Model, , presented by Henk Blom, Rollprint Packaging Products •, Package Integrity: Methods of Detection, , presented by Wendy Mach, Nelson Laboratories •, Use of Design Guide F2097 and U.S. FDA Recognition, , Hal Miller, PACE Solutions LLC •, Sterile Medical Device Package Performance Testing and the Nebulous Effect of Vibration in Transit, , presented by Pat Nolan, DDL •, ASTM International: ASTM Mechanics and Overview, , presented by Diane Trinsey, ASTM Committee F02 staff manager All are welcome to attend. Registration and meeting information, including abstracts describing the presentations shown above, can be found at www.astm.org/COMMIT/F02/Barcelona_Meeting_info . Committee F02 develops standards on barrier materials, their properties and package design, development and production. Typical flexible barrier…, ASTM Committee F02 Next Meeting:, Sept. 26-27, 2012, Barcelona, Spain, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9289
-
Increasing interest in the various uses of electrical contacts is the leading impetus for the development of a proposed new standard, ASTM WK34423 , Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use. The proposed standard is being developed by Subcommittee B08.08 on Metallic Coatings , part of ASTM International Committee B08 on Metallic and Inorganic…, ASTM Committee B08 Next Meeting:, May 10, 2012, May Committee Week, Phoenix, Ariz., Technical Contact:, Sheikh H. Rahman, Lean Corp., Southfield, Mich., Phone: 248-447-1526; srahman@lear.com, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9016
-
A new ASTM subcommittee seeks to acknowledge the ongoing advances being made in the field of nanostructured inorganic coatings. B08.16 on Nanostructured Coatings, part of ASTM International Committee B08 on Metallic and Inorganic Coatings, is currently developing its first proposed standard, ASTM WK29468 , Specification for Galvanic Protection of Steel Using a Nanostructured Coating of 95 % Zinc…
-
Mercury emissions from flue gases in coal-fired power plants are a large source of atmospheric mercury in the United States, but no standard for determination of mercury adsorption currently exists. One promising method of controlling these emissions involves the injection of powdered activated carbon into the flue gas. A proposed new ASTM International standard would evaluate the performance of…
-
Flow characteristics of fine metal powders are important in filling dies for pressing of powder metallurgy compacts, which are later sintered and sometimes machined into finished parts. The flow rate, as measured by a new ASTM standard, determines the flow necessary for a precise quantity of powder to be introduced into the die. The new standard, B964 , Test Methods for Flow Rate of Metal Powders…
-
Two recently approved ASTM International standards provide user-friendly tests for properties of sintered metallurgy products. The new standards, developed by Subcommittee B09.04 on Bearings, are ASTM B962 , Test Methods for Density of Compacted or Sintered Power Metallurgy (PM) Products Using Archimedes’ Principle, and ASTM B963 , Test Methods for Oil Content, Oil-Impregnation Efficiency and…
-
A new ASTM International standard will have applications in a variety of factories, on artificial turfs and playing surfaces, and even in the classroom. The new standard, G194 , Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Surface, was developed by Subcommittee G02.50 on Friction, part of ASTM International Committee G02 on Wear and Erosion…