Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard sets quality requirements for the manufacture, documentation and records retention for light sport aircraft designed to ASTM consensus standards. ASTM F2972 , Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System, was developed by Subcommittee F37.70 on Cross Cutting , part of ASTM International Committee F37 on Light Sport Aircraft .…, ASTM Committee F37 Next Meeting:, April 22-23, 2013, Messe Friedrichshafen GmbH, Friedrichshafen, Germany, Technical Contact:, Adam J. Morrison, Streamline Designs LLC, Greenwood, Ind., Phone: 317-888-1026; adam.morrison@sportplanedesign.com, ASTM Staff Contact:, Christine DeJong, Phone: 610-832-9736; cdejong@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9315
-
A newly approved ASTM copper standard focuses on the mechanical properties of machining brasses. ASTM B981/B981M , Specification for Low Leaded Brass Rod, Bar and Shapes, was developed by Subcommittee B05.02 on Rod, Bar, Wire, Shapes and Forgings , part of ASTM International Committee B05 on Copper and Copper Alloys . “Since 1997, there has been increasing legislation, regulation and voluntary…, ASTM Committee B05 Next Meeting:, April 15-17, 2013, April Committee Week, Indianapolis, Ind., Technical Contact:, Larry Muller, Chase Brass and Copper Co., Montpelier, Ohio, Phone: 419-485-8932; lmuller@chasebrass.com, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9307
-
ASTM International Committee F37 on Light Sport Aircraft will host the International Workshop on Electric Aircraft Standardization on March 28 at the Hilton Garden Inn in Lakeland, Fla. The workshop is being held in conjunction with Committee F37’s standards development meetings at the 38th Annual SUN ‘n FUN International Fly-In and Expo. The marketplace adoption of electric aircraft requires…
-
ASTM Subcommittee D03.14 on Hydrogen and Fuel Cells is currently developing the last two of a series of standards designed to support quality standards for hydrogen fuel cell vehicles being developed by SAE International (formerly the Society of Automotive Engineers) and the International Organization for Standardization (ISO). The two standards currently under development are ASTM WK34574 , Test…, ASTM Committee D03 Next Meeting:, Dec. 5-7, 2011, in conjunction with D02 December meeting, New Orleans, La., Technical Contact:, Jacquelyn Birdsall, California Fuel Cell Partnership, West Sacramento, Calif., Phone: 916-375-7421; jbirdsall@cafcp.org, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9003
-
On July 29, 2011, the U.S. Federal Aviation Administration announced in the Federal Register the availability of ASTM International standard F2746–09 , Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane, as well as ASTM F2245-10c , Specification for Design and Performance of a Light Sport Airplane. Manufacturers of fixed wing light sport aircraft are required to revise…
-
The need for a consensus standard targeting the measurement of gaseous hydrocarbons and other components of gaseous streams allowing users to better comply with U.S. Environmental Protection Agency’s greenhouse gas regulation provided the impetus for the development of a proposed new ASTM International standard meeting this need. ASTM WK33788 , Test Method for Determination of Hydrocarbons and…
-
A new ASTM International standard will be used to aid in the creation of auditing programs within the light sport aircraft industry. ASTM F2839 , Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft, was developed by Subcommittee F37.70 on Cross Cutting , part of ASTM International Committee F37 on Light Sport Aircraft . The new practice specifies the minimum methods and…
-
Dental dams are rectangular sheets of latex used to isolate specific teeth during dental procedures. Testing laboratories, as well as manufacturers of dental dams, exercise bands, rubber bands and tourniquets will be the primary users of a proposed new ASTM standard on dental dams. ASTM WK28312 , Test Method for Quantitation of Powder on Dental Dams, is currently being developed by Subcommittee…, ASTM Committee D11 Next Meeting:, June 13-16, 2011, June Committee Week, Anaheim, Calif., Technical Contact:, Kelly Horton, LEAP Testing Service, Sayre, Pa., Phone: 570-882-4645; horton_kelly@guthrie.org, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8755
-
Laura Koss of Federal Trade Commission to Provide FTC Perspective, ASTM International Committee D13 on Textiles will sponsor a workshop, The Textile Industry and the Green Challenge: A Federal Trade Commission Perspective, on Tuesday Jan. 31, 2011, from Noon-1:30 p.m. EDT. The workshop will take place during the D13 standards development meetings, which will be held Jan. 30-Feb. 2 at the Baltimore Marriott Waterfront in Baltimore, Md. The workshop will provide a…, ASTM Committee D13 Next Meeting:, Jan. 30-Feb. 2, 2011, January Committee Week, Baltimore, Md., Technical Contact:, Vincent Diaz, Atlantic Thread & Supply Co., Baltimore, Md., Phone: 410-687-9424; vince@atlanticthread.com, ASTM Staff Contact:, Jennifer Rogers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8756
-
ASTM International Committee D03 on Gaseous Fuels recently approved two new standards for the hydrogen fuel industry: ASTM D7650 , Test Method for Sampling of Particulate Matter in High Pressure Hydrogen Used as a Gaseous Fuel with an In-Stream Filter, and ASTM D7651 , Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel. Subcommittee D03.14 on Hydrogen and Fuel…