Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard supports the growing use of concrete paving slabs for commercial and residential projects. The new specification ( C1782/C1782M , Specification for Utility Segmental Concrete Paving Slabs) determines the minimum flexural strength, dimensional tolerances, and freeze-thaw durability requirements for paving slabs with dimensions ranging from 12 by 12 in. to 48 by 48…, ASTM Committee C15 on Manufacturing Masonry Units Next Meeting:, Dec. 6-8, 2016, December Committee Week, Orlando, Fla., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, David Smith, Interlocking Concrete Pavement Institute, Chantilly, Va., tel +1.703.657.6900; dsmith@icpi.org, ASTM Staff Contact:, Krista Robbins, tel +1.610.832.9689; krobbins@astm.org Release #10145
-
ASTM International has fully redesigned its International Laboratory Directory, the only directory in the world dedicated to helping manufacturers find the right labs to test their products. Independent laboratories throughout the world rely on thousands of standards and test methods, including many developed by ASTM International. By working with these labs, manufacturers can help ensure that…, Contact:, Anna Spektor, tel +1.610.832.9756; aspektor@astm.org, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10110
-
ASTM International’s Committee on Copper and Copper Alloys (B05) has presented its top annual award – the Award of Merit – to Andrew Kireta, Jr. of the Copper Development Association, Inc. in Franklin, Ind., U.S.A. The prestigious award, which includes the accompanying title of fellow, is ASTM’s highest recognition for individual contributions to developing standards. The committee honored Kireta…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10075
-
ASTM International’s Committee on Manufactured Masonry Units (C15) has presented its top annual award – the Award of Merit – to Steve Talafous of Buildings Consulting Group, Inc. in Minneapolis, Minn., U.S.A. The prestigious award, which includes the accompanying title of fellow, is ASTM’s highest recognition for individual contributions to developing standards. The committee honored Talafous for…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10068
-
Charles B. Blanton, corporate director of environmental, healthy and safety, Mueller Industries, Inc., Memphis, Tenn., has been named chairman of ASTM International Committee B05 on Copper and Copper Alloys . Formed in 1928, B05 has over 210 members representing 9 countries, and includes 12 technical subcommittees that oversee 150 standards related to the development of qualifications data and…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10054
-
Three proposed ASTM International standards will provide a base for the evaluation of the antimicrobial efficacy of solid copper materials. The proposed standards are being developed by Subcommittee B05.06, Methods of Test, part of ASTM International Committee B05 on Copper and Copper Alloys . The three proposed standards are: • ASTM WK42235 , Test Method for Efficacy of Copper Alloy Surfaces as…, ASTM Committee B05 Next Meeting:, Oct. 21-23, 2013, October Committee Week, Jacksonville, Fla., Technical Contact:, James H. Michel, Copper Development Association Inc., New York, N.Y., Phone: 212-251-7210; j ames.michel@copperalliance.us, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9439
-
An important ASTM engine coolant standard, ASTM D3321 , Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants, has recently been revised to reflect advances in engine coolant technology used in modern engines. ASTM D3321 is under the jurisdiction of Subcommittee D15.03 on Physical Properties , part of ASTM International Committee…, ASTM Committee D15 Next Meeting:, May 21-22, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Frederick C. Alverson, Shell Global Solutions, Houston, Texas, Phone: 281-544-9217; frederick.alverson@shell.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9274
-
A newly approved ASTM copper standard focuses on the mechanical properties of machining brasses. ASTM B981/B981M , Specification for Low Leaded Brass Rod, Bar and Shapes, was developed by Subcommittee B05.02 on Rod, Bar, Wire, Shapes and Forgings , part of ASTM International Committee B05 on Copper and Copper Alloys . “Since 1997, there has been increasing legislation, regulation and voluntary…, ASTM Committee B05 Next Meeting:, April 15-17, 2013, April Committee Week, Indianapolis, Ind., Technical Contact:, Larry Muller, Chase Brass and Copper Co., Montpelier, Ohio, Phone: 419-485-8932; lmuller@chasebrass.com, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9307
-
ASTM International Committee D15 on Engine Coolants has formed three new subcommittees: Subcommittees D15.22 on Non-Aqueous Coolants ; D15.25 on Diesel Exhaust Fluid ; and D15.30 on Industrial Heat Transfer Fluids . All interested parties are invited to join in the standards developing activities of these new subcommittees., D15.22, Non-Aqueous Coolants, While there has been an increased interest in non-aqueous coolants industry, there are no current ASTM standards in this area. D15.22 will begin to develop such standards. “The envisioned standards for non-aqueous coolants would be performance standards, rather than ingredient standards, to allow for formulations that are not currently proprietary,” says Jonathan T. Light, chief engineer, Evans…, D15.25, Diesel Exhaust Fluid, Diesel exhaust fluid, often referred to as DEF, is required by many diesel engine-powered vehicles delivered after January 2010. More recent environmental standards issued by the U.S. Environmental Protection Agency have created more stringent emissions standards for agricultural, construction and forestry equipment. DEF is used to reduce nitrogen oxide emissions, which allows original equipment…, D15.30, Industrial Heat Transfer Fluids, Members of D15 recognized that changes in the antifreeze industry, including new manufacturing technologies, improved inhibitor chemistries and recycling technologies, would likely be adapted to the facilities industry as a natural course of innovation. Because D15 has experience developing standards that are technically similar to the facilities heat transfer industry, it was deemed appropriate…, ASTM Committee D15 Next Meeting:, May 17-18, May Committee Week, Anaheim, Calif., Technical Contact:, (D15.22) Jonathan T. Light, Evans Cooling Systems Inc., Sharon, Conn., Phone: 860-435-2418; jtlight@comcast.net ; (D15.25) Edward Eaton Sr., Amalgatech, Phoenix, Ariz., Phone: 602-252-0280; edeaton@amalgatech.com ; (D15.30) John Panasewicz, Clear Choice Antifreeze, Henderson, Colo., Phone: 303-227-9900; johnp@clearchoiceantifreeze.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8837
-
A series of proposed new standards being developed by ASTM International Committee D15 on Engine Coolants would remove technical barriers that currently prevent the cost-effective replacement of ethylene glycol with more environmentally friendly glycerin in antifreeze. The proposed standards are under the jurisdiction of Subcommittee D15.93 on Research and Long Range Planning. Natural glycerin is…