Search
Advanced search
Filter by category
Filter by committee
Search results
-
Ballistic-resistant shields are essential to the safety of law enforcement officers, especially during active shooter incidents. A proposed new ASTM International standard, ASTM WK45341 , Test Method for Ballistic Resistant Shields, will be used to establish minimum performance requirements for this life-saving equipment. ASTM WK45341 falls under the jurisdiction of Subcommittee E54.04 on…, ASTM Committee E54 Next Meeting:, May 28-30, 2014, National Institute of Standards and Technology, Gaithersburg, Md., Technical Contact:, David Otterson, Ph.D., National Law Enforcement and Corrections Technology Center, Gaithersburg, Md., Phone: 301-240-6754; david.m.otterson@lmco.com , ASTM Staff Contact:, Rick Lake, 610-832-9689; rlake@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9643
-
Specifications Present Baseline Requirements for Handheld and Stationary Point Chemical Vapor Detectors, Two new ASTM International specifications are the first standards to present baseline performance requirements for point chemical vapor detectors. The standards were developed as the result of a need recognized by the U.S. Department of Homeland Security for chemical, biological, radiological, nuclear and explosives detection capability, as well as the need to set standards so that manufacturers…, ASTM Committee E54 Next Meeting:, Jan. 27-29, 2014, January Committee Week, Houston, Texas, Technical Contact:, Pamela Chu, Ph.D., National Institute for Standards and Technology, Gaithersburg, Md., Phone: 301-975-2988; pamela.chu@nist.gov , ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9499
-
Three proposed ASTM International standards will provide a base for the evaluation of the antimicrobial efficacy of solid copper materials. The proposed standards are being developed by Subcommittee B05.06, Methods of Test, part of ASTM International Committee B05 on Copper and Copper Alloys . The three proposed standards are: • ASTM WK42235 , Test Method for Efficacy of Copper Alloy Surfaces as…, ASTM Committee B05 Next Meeting:, Oct. 21-23, 2013, October Committee Week, Jacksonville, Fla., Technical Contact:, James H. Michel, Copper Development Association Inc., New York, N.Y., Phone: 212-251-7210; j ames.michel@copperalliance.us, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9439
-
ASTM International is launching an initiative to develop a suite of standards for body armor worn by military and criminal justice personnel. This effort is being supported by the National Institute of Justice, the U.S. Army Program Executive Office – Soldier and the National Institute of Standards and Technology, who are working together to harmonize existing ASTM body armor standards,…, ASTM Committee E54 Next Meeting, : Jan. 27-29, 2014, January Committee Week, Houston, Texas, Technical Contact:, Cassy Robinson, NIST Standards Coordination Office, Gaithersburg, Md., Phone: 301-975-2546; casandra.robinson@nist.gov , ASTM Staff Contact:, Rick Lake, Phone: 610-832-9689; rlake@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9437
-
All interested parties are invited to participate in the standards developing activities of new Task Group D07.02.08 on structural insulated panels. The group is under the jurisdiction of Subcommittee D07.02 on Lumber and Engineered Wood Products , part of ASTM International Committee D07 on Wood . Structural insulated panels are a high performance building system for residential and light…, ASTM Committee D07 Next Meeting:, April 16-18, 2013, April Committee Week, Indianapolis, Ind., Technical Contact:, B.J. Yeh, P.E., APA – The Engineered Wood Association, Tacoma, Wash., Phone: 253-620-7467; borjen.yeh@apawood.org ; Eric Tompos, P.E., NTA, Nappanee, Ind., Phone: 574-773-7975; etompos@ntainc.com, ASTM Staff Contact:, Kevin Shanahan, Phone: 610-832-9737; kshanahan@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9315
-
A newly approved ASTM copper standard focuses on the mechanical properties of machining brasses. ASTM B981/B981M , Specification for Low Leaded Brass Rod, Bar and Shapes, was developed by Subcommittee B05.02 on Rod, Bar, Wire, Shapes and Forgings , part of ASTM International Committee B05 on Copper and Copper Alloys . “Since 1997, there has been increasing legislation, regulation and voluntary…, ASTM Committee B05 Next Meeting:, April 15-17, 2013, April Committee Week, Indianapolis, Ind., Technical Contact:, Larry Muller, Chase Brass and Copper Co., Montpelier, Ohio, Phone: 419-485-8932; lmuller@chasebrass.com, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9307
-
Taking into account the particular needs of people with disabilities is an important aspect of planning for a possible disaster and the aftermath of such an event. A proposed new ASTM International standard will provide planning guidance for helping those with disabilities in a disaster or emergency situation. The proposed new standard, ASTM WK37628 , Guide for Preparing for the Impact of…
-
ASTM International Committee D07 on Wood has approved a new standard, ASTM D7746 , Practice for Calculating the Superimposed Load on Wood-Frame Floor-Ceiling Assemblies for Standard Fire Resistance Tests. ASTM D7746, which was developed by Subcommittee D07.05 on Wood Assemblies , will be used in conjunction with other fire test standards. Standards such as ASTM E119, Test Methods for Fire Tests…
-
Physical barrier systems are an important component in protecting high security assets, and the demand for barrier products has intensified. The capability and integrity of these systems must be verified through testing, and ensured through manufacturing and installation compliance with minimum standard requirements for compatibility with tested designs. In order to facilitate this compliance…
-
Increasing interest in the various uses of electrical contacts is the leading impetus for the development of a proposed new standard, ASTM WK34423 , Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use. The proposed standard is being developed by Subcommittee B08.08 on Metallic Coatings , part of ASTM International Committee B08 on Metallic and Inorganic…, ASTM Committee B08 Next Meeting:, May 10, 2012, May Committee Week, Phoenix, Ariz., Technical Contact:, Sheikh H. Rahman, Lean Corp., Southfield, Mich., Phone: 248-447-1526; srahman@lear.com, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9016