Search
Advanced search
Filter by category
Filter by committee
Search results
-
Three proposed ASTM International standards will provide a base for the evaluation of the antimicrobial efficacy of solid copper materials. The proposed standards are being developed by Subcommittee B05.06, Methods of Test, part of ASTM International Committee B05 on Copper and Copper Alloys . The three proposed standards are: • ASTM WK42235 , Test Method for Efficacy of Copper Alloy Surfaces as…, ASTM Committee B05 Next Meeting:, Oct. 21-23, 2013, October Committee Week, Jacksonville, Fla., Technical Contact:, James H. Michel, Copper Development Association Inc., New York, N.Y., Phone: 212-251-7210; j ames.michel@copperalliance.us, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9439
-
An important ASTM engine coolant standard, ASTM D3321 , Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants, has recently been revised to reflect advances in engine coolant technology used in modern engines. ASTM D3321 is under the jurisdiction of Subcommittee D15.03 on Physical Properties , part of ASTM International Committee…, ASTM Committee D15 Next Meeting:, May 21-22, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Frederick C. Alverson, Shell Global Solutions, Houston, Texas, Phone: 281-544-9217; frederick.alverson@shell.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9274
-
A newly approved ASTM copper standard focuses on the mechanical properties of machining brasses. ASTM B981/B981M , Specification for Low Leaded Brass Rod, Bar and Shapes, was developed by Subcommittee B05.02 on Rod, Bar, Wire, Shapes and Forgings , part of ASTM International Committee B05 on Copper and Copper Alloys . “Since 1997, there has been increasing legislation, regulation and voluntary…, ASTM Committee B05 Next Meeting:, April 15-17, 2013, April Committee Week, Indianapolis, Ind., Technical Contact:, Larry Muller, Chase Brass and Copper Co., Montpelier, Ohio, Phone: 419-485-8932; lmuller@chasebrass.com, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9307
-
Increasing interest in the various uses of electrical contacts is the leading impetus for the development of a proposed new standard, ASTM WK34423 , Specification for Electrodeposited Coatings of Palladium-Cobalt Alloy for Engineering Use. The proposed standard is being developed by Subcommittee B08.08 on Metallic Coatings , part of ASTM International Committee B08 on Metallic and Inorganic…, ASTM Committee B08 Next Meeting:, May 10, 2012, May Committee Week, Phoenix, Ariz., Technical Contact:, Sheikh H. Rahman, Lean Corp., Southfield, Mich., Phone: 248-447-1526; srahman@lear.com, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9016
-
ASTM International Committee D15 on Engine Coolants has formed three new subcommittees: Subcommittees D15.22 on Non-Aqueous Coolants ; D15.25 on Diesel Exhaust Fluid ; and D15.30 on Industrial Heat Transfer Fluids . All interested parties are invited to join in the standards developing activities of these new subcommittees., D15.22, Non-Aqueous Coolants, While there has been an increased interest in non-aqueous coolants industry, there are no current ASTM standards in this area. D15.22 will begin to develop such standards. “The envisioned standards for non-aqueous coolants would be performance standards, rather than ingredient standards, to allow for formulations that are not currently proprietary,” says Jonathan T. Light, chief engineer, Evans…, D15.25, Diesel Exhaust Fluid, Diesel exhaust fluid, often referred to as DEF, is required by many diesel engine-powered vehicles delivered after January 2010. More recent environmental standards issued by the U.S. Environmental Protection Agency have created more stringent emissions standards for agricultural, construction and forestry equipment. DEF is used to reduce nitrogen oxide emissions, which allows original equipment…, D15.30, Industrial Heat Transfer Fluids, Members of D15 recognized that changes in the antifreeze industry, including new manufacturing technologies, improved inhibitor chemistries and recycling technologies, would likely be adapted to the facilities industry as a natural course of innovation. Because D15 has experience developing standards that are technically similar to the facilities heat transfer industry, it was deemed appropriate…, ASTM Committee D15 Next Meeting:, May 17-18, May Committee Week, Anaheim, Calif., Technical Contact:, (D15.22) Jonathan T. Light, Evans Cooling Systems Inc., Sharon, Conn., Phone: 860-435-2418; jtlight@comcast.net ; (D15.25) Edward Eaton Sr., Amalgatech, Phoenix, Ariz., Phone: 602-252-0280; edeaton@amalgatech.com ; (D15.30) John Panasewicz, Clear Choice Antifreeze, Henderson, Colo., Phone: 303-227-9900; johnp@clearchoiceantifreeze.com, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8837
-
A new ASTM subcommittee seeks to acknowledge the ongoing advances being made in the field of nanostructured inorganic coatings. B08.16 on Nanostructured Coatings, part of ASTM International Committee B08 on Metallic and Inorganic Coatings, is currently developing its first proposed standard, ASTM WK29468 , Specification for Galvanic Protection of Steel Using a Nanostructured Coating of 95 % Zinc…
-
A series of proposed new standards being developed by ASTM International Committee D15 on Engine Coolants would remove technical barriers that currently prevent the cost-effective replacement of ethylene glycol with more environmentally friendly glycerin in antifreeze. The proposed standards are under the jurisdiction of Subcommittee D15.93 on Research and Long Range Planning. Natural glycerin is…
-
Honeycomb ceramics, porous with linear hollow channels, are being used worldwide in automotive catalytic converters and as diesel particulate filters for trucks. Flexural testing of this type of ceramics is addressed in a new ASTM International standard, ASTM C1674 , Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient…
-
ASTM International Committee B05 on Copper and Copper Alloys has created a new task group, TG9018, which will be focused on the Antimicrobial Applications of Copper and Copper Alloys. The task group was formed following the U.S. Environmental Protection Agency's announcement of its registration of copper alloys as antimicrobial materials with specific health claims. According to James Michel,…
-
New Advanced Ceramics Standards from ASTM Cover Fracture Mirror Size Analysis, Tensile Strength DataSubcommittee C28.01 on Mechanical Properties and Performance, part of ASTM International Committee C28 on Advanced Ceramics, has recently approved two new standards, ASTM C1678 , Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses, and ASTM C1683 , Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics., ASTM C1678 —Bringing Consistency to Fracture Mirror Size Analysis, Fracture mirror size analysis is a powerful quantitative tool for the interpretation of broken ceramic and glass articles. While this type of analysis can be used to determine the stress in a part at the instant of fracture, inspection and interpretation procedures have often varied, resulting in uncertainty in stress estimates. ASTM C1678, Practice for Fractographic Analysis of Fracture Mirror…, ASTM C1683 —Scaling Strength Values, ASTM C1683, Practice for Size Scaling of Tensile Strength Using Weibull Statistics for Advanced Ceramics, provides methodology to convert fracture strength parameters estimated from data obtained with one test geometry to strength parameters representing other test geometries. Stephen Duffy, chair of civil engineering, Cleveland State University, and C28 member, says that companies producing…