Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s committee on waste management ( D34 ) is seeking volunteers to help create five new standards related to waste treatment, recovery, and reuse (subcommittee D34.03)., Classification for Degradable Materials and Products (WK56175), This guide will help classify products based on how they degrade. It will support greater consistency and clarity for people who buy, sell, and use materials and products that claim to have certain degradation characteristics. In particular, the standard could help purchasing managers, waste-management operators, sustainability managers, and product managers., Guide for Operating an Anaerobic Digestion Facility (WK56176), Anaerobic digestion of organic waste, an alternative to composting, is gaining popularity for a number of reasons (e.gs., energy from biogas, avoiding fugitive leachate, improving life cycle analysis reporting). With more anaerobic digesters entering the market, there is a need for standards to measure degradation within these digesters. This new guide could help maximize safety and performance…, Practice for Estimating the Environmental Persistence of Materials Using First Order Rate Constant Calculations (WK56177), Experts working in waste management, environmental sciences, and chemical production need to know how long a product will remain intact and whether it will accumulate over time. This standard will help them estimate how long a material will remain in a specific environment, allowing them to better understand its long-term impact on the environment. Specifically, the standard provides a way to…, Guide for Materials Intended for Discard into Municipal Waste Water Treatment Facilities (WK57010), Some products are frequently discarded into wastewater systems. The guide will help determine whether a material will have a neutral, positive, or negative impact on wastewater systems. This will help companies better understand how their products degrade and choose environmentally-friendly materials., Guide for Materials Intended for Discard into Municipal Landfills (WK57011), Some products are frequently discarded into municipal landfills. The guide will help determine whether a material will have a neutral, positive, or negative impact on landfills. This will help companies better understand how their products degrade and choose environmentally-friendly materials. In addition, the standard could help waste operators determine what kinds of materials they allow to…, Committee on Waste Management (D34) Next Meeting:, April 24-27, 2017, Las Vegas, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Teresa Clark, ENSO Plastics, Mesa, Ariz., tel +1.623.242.2313; teresa.clark@ensoplastics.com, ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10265
-
By request from industry, ASTM International will host an organizational meeting to potentially create a new technical committee that develops voluntary consensus standards for cannabis. The no-fee meeting is Tuesday, Feb. 28, at 9 a.m. EST at ASTM International’s global headquarters in, West Conshohocken, Pa., USA. Industry stakeholders and others interested in charting a path towards voluntary…, ASTM Cannabis Organizational Meeting:, Feb. 28, 2017, ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA, 19428-2959 USA, Media Inquiries:, Nate Osburn, tel +1.610.832.9603; nosburn@astm.org, ASTM Staff Contact:, Christine DeJong, tel +1.610.832.9736; cdejong@astm.org Release #10251
-
ASTM International’s committee on waste management ( D34 ) recently launched work on three proposed new standards. Anyone with an interest in waste management is invited to join the work on the following proposed standards, which are being developed by a subcommittee that focuses on treatment, recovery and reuse (D34.03). Guide for Creating Product Specific Waste Hierarchy (WK55328) This proposed…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Teresa Clark, ENSO Plastic, Mesa, Ariz., tel +1.623.242.2313; teresa.clark@ensoplastics.com, ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10213
-
Eric R. Boes, senior corporate quality engineer at Delta Faucet Company in Indianapolis, Indiana, USA, has received the Gary M. Kralik Distinguished Service Award from ASTM International Committee on Nonferrous Metals and Alloys ( B02 ). A member of ASTM since 1991, Boes was specifically recognized for his dedicated service as a leader and key contributing member of Committee B02, chairman of…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10203
-
An ASTM International committee is creating a standard to support the emergence of a geosynthetic material that is increasingly used in soil erosion protection and other construction projects. All interested parties are invited to participate in this effort (WK49719, Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending…, ASTM Committee D35 on Geosynthetics Next Meeting:, June 29-July 1, 2016, June Committee Week, Chicago, Ill., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact: John, Paulson, Dison Supply LLC, Atlanta, Ga., tel +1.770.851.6090; jnptut@aol.com , ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #10006
-
Thinner cell phone casings and business card holders are just two of the varied applications for a new high fluidity zinc die casting alloy. This casting is now covered by a new ASTM standard, ASTM B989 , Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings. The HF alloy was developed through a project coordinated by the Cast Metals Coalition, an…, ASTM Committee B02 Next Meeting:, Nov. 10-12, 2014, November committee week, New Orleans, La., Technical Contact:, John Malmgreen, Eastern Alloys Inc., Maybrook, N.Y., Phone: 845-427-2151; jmalmgreen@eazall.com, ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9640
-
Bisphenol A, or BPA, is a high production volume chemical widely used in manufacturing polycarbonate plastics and epoxy resins that are used in many industries. Procedures described in a new ASTM International standard will be used for measuring BPA concentration in environmental media such as soils, sludges and biosolids. The new standard, ASTM D7858 , Test Method for Determination of Bisphenol…, ASTM Committee D34 Next Meeting:, Virtual meeting, Oct. 10-11, 2013, Technical Contact:, Lawrence Zintek, Ph.D., U.S. Environmental Protection Agency, Region 5 Chicago Regional Laboratory, Chicago, Ill., Phone: 312-886-2925; zintek.lawrence@epa.gov, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9456
-
A new ASTM subcommittee will develop proposed standards to analyze organic compounds discharged into sanitary sewers. Subcommittee D34.02 on Discharge of Organic Wastes into Sanitary Sewers is part of ASTM International Committee D34 on Waste Management . “Considering the need for low detection limits and measurements that would assure all of the compounds of interest have been measured, sanitary…, ASTM Committee D34 Next Meeting:, April 2-3, 2013, EPA Headquarters, Las Vegas, Nev., Technical Contact:, John E. Burnett, Department of Public Works of Baltimore County, Columbia, Md., Phone: 410-887-5488; jeburnett@baltimorecountymd, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9331
-
A proposed ASTM standard will be useful in covering the level of defects that exist in hot rolled rod coil. The proposed standard, ASTM WK37796 , Specification for General Requirements for Hot Rolled Rod Coil, is being developed by Subcommittee B02.07 on Refined Nickel and Cobalt and Their Alloys , part of ASTM International Committee B02 on Nonferrous Metals and Alloys . According to Larry Paul…, ASTM Committee B02 Next Meeting:, Nov. 12-14, 2012, November Committee Week, Atlanta, Ga., Technical Contact:, Larry Paul, ThyssenKrupp VDM USA, LLC, Peru, Ind., Phone: 765-689-0215; larry.paul@thyssenkrupp.com, ASTM Staff Contact:, Jeffrey Adkins, Phone: 610-832-9738; jadkins@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9286
-
The creation of new nickel base alloys in pipe and tube forms, used in the oil and power industries, was the driving force for developing a new ASTM International standard, ASTM B983 , Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube. ASTM B983 was developed by Subcommittee B02.07 on Refined Nickel and Cobalt and Their Alloys , part of ASTM…