Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s bioenergy and industrial-chemicals-from-biomass committee ( E48 ) is creating a standard that will help companies that produce biofuel using – in part – kernel fiber. This fiber was approved as a “cellulosic feedstock” by the U.S. Environmental Protection Agency in 2014. As such, renewable biofuel that is produced using kernel fiber as a feedstock can qualify as cellulosic…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10634
-
A new ASTM International test method will help determine the carbonyl content of thermochemically derived bio-oils. Carbonyls contribute to instability during storage and processing of bio-oils. “This new standard provides a simple way to measure carbonyl content. This can help determine the quality of a bio-oil that will undergo further upgrading to fuels and chemicals,” says ASTM member Earl…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10518
-
A new ASTM International specification will help standardize production and use of bimetallic “busbar” (copper-clad aluminum flat-strip and flat-wire that distributes high-current power). A copper-clad aluminum electrical conductor is a cost-effective alternative to pure copper or aluminum conductors. “The need for this standard is global.” said Dustin Fox, the chairman of the committee on…, Committee on Electrical Conductors (B01) Next Meeting:, Oct. 11-12, New Orleans, La., Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Liang Yuncheng, Yantai Fisend Bimetal Co., Yantai City, Shangdong Province, China, tel +86.186.605.51330; brianlrc@fisend.com, Staff Contact:, Kristy Straiton, tel +1.610.832.9640; kstraiton@astm.org R elease #10320
-
A first-of-its-kind standard from ASTM International aims to support the introduction of ethanol as a cooking fuel, a step which will help people in developing countries access and use a safer alternative to wood, charcoal, and other traditional fuels. Each year, millions of people get sick or die due to household air pollution from cooking with traditional fuels, according to ASTM member Brady…, ASTM Committee E48 on Bioenergy and Industrial Chemicals and Biomass Next Meeting:, June 29, 2016, Bellevue, Wash., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Brady Luceno, POET Clean Cooking, Sioux Falls, S.D., +1.605.965.6702; brady.luceno@poet.com , ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10017
-
Activated carbon is processed to have small, low-volume pores that increase the surface area available for adsorption. It has applications in the medical, environmental and energy realms, among others. Since 1962, ASTM International Committee D28 on Activated Carbon has developed standards that play a pre-eminent role in how activated carbon is used. A D28 subcommittee, D28.02 on Liquid Phase…, WK47401, Xylenol Orange Dye, The xylenol orange dye test is a way to determine the relative adsorption rate of unused or reactivated carbons by adsorption of xylenol orange from aqueous solution. This is an important means for deciding which type of activated carbon to use to a specific water treatment application. “Activated carbon performance can roughly be defined as a combination of the ability to adsorb a particular…, WK47421, Particle Size Distribution, Mercury flue gas, home water filters and potable water treatment are the main applications in which powdered and fine mesh carbons are used. A proposed new test method will describe how a laser light scattering technique can determine the particle size distribution of fine mesh activated carbon. ASTM member Neal Megonnell, vice president, sales and marketing, Haycarb USA, says the proposed test…, ASTM Committee D28 Next Meeting:, April 27, April Committee Week, Anaheim, Calif., Technical Contact:, (WK47401) Adam Redding, Ph.D., Evoqua Water Technologies LLC, Northwest, Pa., tel +1.724.719.0805; adam.redding@evoqua.com and (WK47421) Neal E. Megonnell, Haycarb USA, Pittsburgh, Pa., tel +1.412.709.7487; neal@haycarbusa.com, ASTM Staff Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9731
-
Overhead conductors used to transmit electricity typically consist of stranded aluminum wires that surround a stranded steel wire core. However, a more recently developed conductor consists of composite materials of carbon and glass fibers that replace the stranded steel-supporting member. This new type of conductor will be covered in a new ASTM International standard, ASTM B987 , Specification…, ASTM Committee B01 Next Meeting:, April 29, 2015, April Committee Week, Anaheim, Calif., Technical Contact:, Eric Bosze, Ph.D., CTC Global, Irvine, Calif., Phone: +1.949.381.7262; ebosze@ctcglobal.com, ASTM Staff Contact:, Kristy Straiton, Phone: +1.610.832.9640; kstraiton@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: +1.610.832.9603; bschindl@astm.org Release #9694
-
ASTM B986 , Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application, will be used within the electronics and aerospace industries to validate tensile strength specification requirements for electrical conductors. ASTM B986 was developed by Subcommittee B01.02 on Methods of Test and Sampling Procedure , part of ASTM…, ASTM Committee B01 Next Meeting:, Oct. 23, 2013, October Committee Week, Jacksonville, Fla., Technical Contact:, Stephen Childers, IWG High Performance Conductors Inc., Inman, S.C., Phone: 864-472-0438; stephen.childers@iwghpc.com , ASTM Staff Contact:, Kristy Straiton, Phone: 610-832-9640; kstraiton@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9364
-
The construction of an unprecedented number of overhead power lines around the world has increased the demand for accurate data and models for electrical conductors. A proposed new standard, ASTM WK35208, Test Methods for Stress-Strain and Creep Testing for Overhead Electrical Conductors, will answer this global need. ASTM WK35208 is being developed by Subcommittee B01.02 on Methods of Test and…
-
Code words have historically been used in the electrical conductor industry as a simple method of identifying the construction details of an overhead conductor product. A proposed new ASTM standard will list code word names and provide a means to register and publish new code words. ASTM WK28737 , Specification for Electrical Overhead Conductor Code Word Names, is being developed by Subcommittee…, ASTM Committee B01 Next Meeting:, Oct. 13, October Committee Week, San Antonio, Texas, Technical Contact:, Gordon Baker, General Cable, Highland Heights, Ky., Phone: 859-572-8493; gbaker@generalcable.com, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8613
-
Silver-, nickel- and tin-coated flat conductors are currently used in a variety of electronic applications, including computer, and in the military and commercial aerospace industries. Despite this use, flat conductors made of these materials are not covered by established standards. ASTM International Committee B01 on Electrical Conductors is now developing the following three standards to cover…, ASTM Committee B01 Next Meeting: , April 21, 2010 , April Committee Week, St. Louis, Mo., Technical Contact:, Stephen Childers, IWG High Performance Conductors Inc., Inman, S.C., Phone: 864-472-9694; stephen.childers@iwghpc.com, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8442/Dec2009