Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM standard provides a quick and easy way to estimate the average size of powder particles used in a wide variety of industrial applications. The new standard ( E2980 , Test Methods for Estimating Average Particle Size of Powders Using Air Permeability) reflects advances in measurement technology that lead to better precision. According to ASTM member Frank J. Venskytis, an independent…, ASTM Committee E29 on Particle and Spray Characterization Next Meeting:, April 27-28, 2016 Hollywood, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Frank J. Venskytis, Clayton, N.C., tel +1.919.553.8050; frankvenskytis@gmail.com, ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #9965
-
Overhead conductors used to transmit electricity typically consist of stranded aluminum wires that surround a stranded steel wire core. However, a more recently developed conductor consists of composite materials of carbon and glass fibers that replace the stranded steel-supporting member. This new type of conductor will be covered in a new ASTM International standard, ASTM B987 , Specification…, ASTM Committee B01 Next Meeting:, April 29, 2015, April Committee Week, Anaheim, Calif., Technical Contact:, Eric Bosze, Ph.D., CTC Global, Irvine, Calif., Phone: +1.949.381.7262; ebosze@ctcglobal.com, ASTM Staff Contact:, Kristy Straiton, Phone: +1.610.832.9640; kstraiton@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: +1.610.832.9603; bschindl@astm.org Release #9694
-
A new ASTM International standard, ASTM E2872 , Guide for Determining Cross-Section Averaged Characteristics of a Spray Using Laser-Diffraction Instruments in a Wind Tunnel Apparatus, will be used to guide the characterization of nozzles and atomizers using laser diffraction instruments. ASTM E2872 is primarily applicable to aerial agricultural spraying, aerial forest sprays and air-blast…, ASTM Committee E29 Next Meeting:, Oct. 6-7, 2014, October Committee Week, New Orleans, La., Technical Contact:, Gordon Holloway Ph.D., University of New Brunswick, Fredericton, New Brunswick, Canada; Phone: 506-447-3108; holloway@unb.ca, ASTM Staff Contact:, Katerina Koperna, Phone: 610-832-9728; kkoperna@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9592
-
A large and diverse set of manufactured materials are in powdered form at one stage or another. No matter what the material is, from cement to metered dose inhaler ingredients, product performance is related to particle size distribution. “The strength of concrete is related to the fineness of the cement powder used, but the danger with very fine grades is excessive heating on setting,” says…, ASTM Committee E29 Next Meeting:, Oct. 6-7, 2014, October Committee Week, New Orleans, La., Technical Contact:, Alan F. Rawle, Ph.D., Malvern Instruments, Westborough, Mass., Phone: 508-768-6434; alan.rawle@malvern.com , ASTM Staff Contact:, Katerina Koperna, Phone: 610-832-9728; kkoperna@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9576
-
, ASTM to Partner with ASC to Foster EPD Development, ASTM International will be collaborating with industry to develop Environmental Product Declarations (EPDs) across the 90+ industry markets they support, including sealants. The Adhesive and Sealant Council (ASC) will be partnering with ASTM International to raise awareness of this effort, educate industry on the value of Type III EPDs, and proactively engage industry in developing Product…, ASTM Staff Contact:, Tim Brooke, Phone: 610-832-9729; tbrooke@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9370
-
ASTM B986 , Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application, will be used within the electronics and aerospace industries to validate tensile strength specification requirements for electrical conductors. ASTM B986 was developed by Subcommittee B01.02 on Methods of Test and Sampling Procedure , part of ASTM…, ASTM Committee B01 Next Meeting:, Oct. 23, 2013, October Committee Week, Jacksonville, Fla., Technical Contact:, Stephen Childers, IWG High Performance Conductors Inc., Inman, S.C., Phone: 864-472-0438; stephen.childers@iwghpc.com , ASTM Staff Contact:, Kristy Straiton, Phone: 610-832-9640; kstraiton@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9364
-
A newly revised ASTM terminology standard reflects the latest technological advances in particle size analysis (standard test sieves) and particle separation (screening media). ASTM E1638 , Terminology Relating to Sieves, Sieving Methods and Screening Media, was developed by Subcommittee E29.01 on Sieves, Sieving Methods and Screening Media , part of ASTM International Committee E29 on Particle…, ASTM Committee E29 Next Meeting:, May 1-2, 2013, in conjunction with B09 May meeting, Ft. Lauderdale Beach, Fla., Technical Contact:, Kenneth H. Beyer, American Wire Cloth Institute, Elizabeth, N.J., Phone: 908-688-4600; ken@uniquewire.com, ASTM Staff Contact:, Katerina Koperna, Phone: 610-832-9728; kkoperna@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9290
-
The construction of an unprecedented number of overhead power lines around the world has increased the demand for accurate data and models for electrical conductors. A proposed new standard, ASTM WK35208, Test Methods for Stress-Strain and Creep Testing for Overhead Electrical Conductors, will answer this global need. ASTM WK35208 is being developed by Subcommittee B01.02 on Methods of Test and…
-
Sealant manufacturers will use a new ASTM International standard to evaluate new products and changes to these products due to exposure to weather. The new standard, ASTM C1735 , Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation, is under the jurisdiction of Subcommittee C24.20 on General Test Methods , part of ASTM International Committee C24 on Building…, ASTM Committee C24 Next Meeting:, Jan. 8-10, 2012, Ft. Lauderdale, Fla., Technical Contact:, Christopher C. White, Ph.D., National Institute of Standards and Technology, Gaithersburg, Md., Phone: 301-975-6016; christopher.white@nist.gov, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9005
-
ASTM Subcommittee D03.14 on Hydrogen and Fuel Cells is currently developing the last two of a series of standards designed to support quality standards for hydrogen fuel cell vehicles being developed by SAE International (formerly the Society of Automotive Engineers) and the International Organization for Standardization (ISO). The two standards currently under development are ASTM WK34574 , Test…, ASTM Committee D03 Next Meeting:, Dec. 5-7, 2011, in conjunction with D02 December meeting, New Orleans, La., Technical Contact:, Jacquelyn Birdsall, California Fuel Cell Partnership, West Sacramento, Calif., Phone: 916-375-7421; jbirdsall@cafcp.org, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9003