Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s standard for drywall ( C1396/C1396M-14a, Specification for Gypsum Board ) was cited in the United States Federal Register on Jan. 23, 2015. This fulfilled a goal of the Drywall Safety Act of 2012 to create a standard for limited sulfur content in drywall. Specifically, the Consumer Product Safety Commission determined that C1396 is accepted as “a voluntary standard for…, ASTM Staff Contact:, Thomas O’Toole, tel +1.610.832.9739; totoole@astm.org, ASTM PR Contact:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org Release #9769
-
Overhead conductors used to transmit electricity typically consist of stranded aluminum wires that surround a stranded steel wire core. However, a more recently developed conductor consists of composite materials of carbon and glass fibers that replace the stranded steel-supporting member. This new type of conductor will be covered in a new ASTM International standard, ASTM B987 , Specification…, ASTM Committee B01 Next Meeting:, April 29, 2015, April Committee Week, Anaheim, Calif., Technical Contact:, Eric Bosze, Ph.D., CTC Global, Irvine, Calif., Phone: +1.949.381.7262; ebosze@ctcglobal.com, ASTM Staff Contact:, Kristy Straiton, Phone: +1.610.832.9640; kstraiton@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: +1.610.832.9603; bschindl@astm.org Release #9694
-
Two new nonmetallic plaster base standards have been approved by ASTM International Committee C11 on Gypsum and Related Building Materials and Systems . Metallic and nonmetallic plaster bases, also known as lath, are used as reinforcement and to serve as an attachment mechanism for portland cement based plaster or stucco. While standards exist for metal lath, there had not been standards for…, ASTM Committee C11 Next Meeting:, Nov. 10-13, 2014, November Committee Week, New Orleans, La., Technical Contact:, Bill Egan, BASF Corp., Jacksonville, Fla., Phone: 904-996-6115; bill.egan@basf.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9653
-
All interested parties are invited to join in the development of a proposed new ASTM International standard that would be used during the design and installation of suspended gypsum ceiling systems for commercial construction. ASTM WK44242 , Practice for Installation of Metal Suspension Ceiling Systems for Gypsum Board Applications, is being developed by Subcommittee C11.03 on Specifications for…, ASTM Committee C11 Next Meeting:, May 5-8, 2014, May Committee Week, Toronto, Ontario, Canada, Technical Contact:, Joseph J. Kelly, Worthington Armstrong Venture, Malvern, Pa., Phone: 610-722-1218; jjkelly@armstrong.com , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9576
-
A new ASTM International standard will provide a qualitative means to determine the potential effect of plasticizers contained within polyvinylchloride floor covering materials on a specific adhesive. ASTM D7888 , Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinylchloride-Backed Floor Coverings, was developed by Subcommittee D14.10 on Working Properties, part…, ASTM Committee D14 Next Meeting:, April 6-8, 2014, April Committee Week, Toronto, Ontario, Canada, Technical Contact:, Larry Press, Helmitin Adhesives Inc., Jacksonville, Fla., Phone: 904-765-2364; l.press@helmit inadehesives.com , ASTM Staff Contact:, Joseph Hugo, Phone: 610-832-9740; jhugo@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9533
-
ASTM B986 , Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application, will be used within the electronics and aerospace industries to validate tensile strength specification requirements for electrical conductors. ASTM B986 was developed by Subcommittee B01.02 on Methods of Test and Sampling Procedure , part of ASTM…, ASTM Committee B01 Next Meeting:, Oct. 23, 2013, October Committee Week, Jacksonville, Fla., Technical Contact:, Stephen Childers, IWG High Performance Conductors Inc., Inman, S.C., Phone: 864-472-0438; stephen.childers@iwghpc.com , ASTM Staff Contact:, Kristy Straiton, Phone: 610-832-9640; kstraiton@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9364
-
ASTM C1264 Addresses Origin and Source Labeling of Drywall and Other Gypsum Products, In response to the importation of contaminated drywall that caused health and safety hazards when used in home construction, the Drywall Safety Act of 2012 (PL 112-266) was signed into law by President Barack Obama on Jan. 14, 2013. The new law cites ASTM International standard C1264-11 , Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling and…, Labeling, The Drywall Safety Act requires the CPSC to set regulations based on C1264 , which was developed by ASTM Subcommittee C11.01 on Specifications and Test Methods for Gypsum Products , part of ASTM Committee C11 on Gypsum and Related Building Materials and Systems . The standard provides the CPSC, states, suppliers and consumers with an effective tool for supply chain communication by specifying…, Up-to-Date Standards, Under the act’s provisions, ASTM International will notify the CPSC of any updates to the labeling standard within 60 days; the CPSC will then have 90 days to disapprove ASTM’s recommended changes. If the CPSC accepts the most updated version of the ASTM standard, then the new version becomes effective 180 days after ASTM’s initial notification., Sulfur Content, Because sulfur content levels in drywall have been associated with elevated corrosion rates in a home, the act requires that the CPSC issue a regulation that limits the sulfur content for drywall manufactured in the United States or imported from abroad. In lieu of issuing a federal rule, the CPSC may adopt a voluntary consensus standard, developed by C11.01, that addresses the level of sulfur…, ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9277
-
Many manufacturers have their own methods for testing adhesives for carpet or resilient or wood floor coverings. A new ASTM standard addresses this inconsistency by presenting a set of adhesive requirements that can be used throughout the floor covering industry. The new standard, ASTM D7799 , Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings…
-
The construction of an unprecedented number of overhead power lines around the world has increased the demand for accurate data and models for electrical conductors. A proposed new standard, ASTM WK35208, Test Methods for Stress-Strain and Creep Testing for Overhead Electrical Conductors, will answer this global need. ASTM WK35208 is being developed by Subcommittee B01.02 on Methods of Test and…
-
The Adhesive and Sealant Council (ASC) is partnering with ASTM International (ASTM) to produce the inaugural “Adhesives and Sealants Sustainability Summit” July 26-27 at the Hyatt O’Hare in Rosemont, Ill. The Sustainability Summit will provide an opportunity for the adhesive and sealant supply chain to discuss all aspects of sustainability as it relates to the sector. “The trend of…, ASC Media Contact:, Matt Croson , ASC President (phone: 301-986-9700, ext. 111 ; matt.croson@ascouncil.org, ASTM Media Contact:, Pat Picariello, director, Developmental Operations, ASTM International (phone: 610-832-9720; ppicarie@astm.org ) May 27, 2011