Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s committee on waste management ( D34 ) is seeking volunteers to help create five new standards related to waste treatment, recovery, and reuse (subcommittee D34.03)., Classification for Degradable Materials and Products (WK56175), This guide will help classify products based on how they degrade. It will support greater consistency and clarity for people who buy, sell, and use materials and products that claim to have certain degradation characteristics. In particular, the standard could help purchasing managers, waste-management operators, sustainability managers, and product managers., Guide for Operating an Anaerobic Digestion Facility (WK56176), Anaerobic digestion of organic waste, an alternative to composting, is gaining popularity for a number of reasons (e.gs., energy from biogas, avoiding fugitive leachate, improving life cycle analysis reporting). With more anaerobic digesters entering the market, there is a need for standards to measure degradation within these digesters. This new guide could help maximize safety and performance…, Practice for Estimating the Environmental Persistence of Materials Using First Order Rate Constant Calculations (WK56177), Experts working in waste management, environmental sciences, and chemical production need to know how long a product will remain intact and whether it will accumulate over time. This standard will help them estimate how long a material will remain in a specific environment, allowing them to better understand its long-term impact on the environment. Specifically, the standard provides a way to…, Guide for Materials Intended for Discard into Municipal Waste Water Treatment Facilities (WK57010), Some products are frequently discarded into wastewater systems. The guide will help determine whether a material will have a neutral, positive, or negative impact on wastewater systems. This will help companies better understand how their products degrade and choose environmentally-friendly materials., Guide for Materials Intended for Discard into Municipal Landfills (WK57011), Some products are frequently discarded into municipal landfills. The guide will help determine whether a material will have a neutral, positive, or negative impact on landfills. This will help companies better understand how their products degrade and choose environmentally-friendly materials. In addition, the standard could help waste operators determine what kinds of materials they allow to…, Committee on Waste Management (D34) Next Meeting:, April 24-27, 2017, Las Vegas, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Teresa Clark, ENSO Plastics, Mesa, Ariz., tel +1.623.242.2313; teresa.clark@ensoplastics.com, ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10265
-
By request from industry, ASTM International will host an organizational meeting to potentially create a new technical committee that develops voluntary consensus standards for cannabis. The no-fee meeting is Tuesday, Feb. 28, at 9 a.m. EST at ASTM International’s global headquarters in, West Conshohocken, Pa., USA. Industry stakeholders and others interested in charting a path towards voluntary…, ASTM Cannabis Organizational Meeting:, Feb. 28, 2017, ASTM International, 100 Barr Harbor Drive, West Conshohocken, PA, 19428-2959 USA, Media Inquiries:, Nate Osburn, tel +1.610.832.9603; nosburn@astm.org, ASTM Staff Contact:, Christine DeJong, tel +1.610.832.9736; cdejong@astm.org Release #10251
-
ASTM International’s committee on waste management ( D34 ) recently launched work on three proposed new standards. Anyone with an interest in waste management is invited to join the work on the following proposed standards, which are being developed by a subcommittee that focuses on treatment, recovery and reuse (D34.03). Guide for Creating Product Specific Waste Hierarchy (WK55328) This proposed…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Teresa Clark, ENSO Plastic, Mesa, Ariz., tel +1.623.242.2313; teresa.clark@ensoplastics.com, ASTM Staff Contact:, Brian Milewski, tel +1.610.832.9619; bmilewski@astm.org Release #10213
-
An ASTM International committee is creating a standard to support the emergence of a geosynthetic material that is increasingly used in soil erosion protection and other construction projects. All interested parties are invited to participate in this effort (WK49719, Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending…, ASTM Committee D35 on Geosynthetics Next Meeting:, June 29-July 1, 2016, June Committee Week, Chicago, Ill., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact: John, Paulson, Dison Supply LLC, Atlanta, Ga., tel +1.770.851.6090; jnptut@aol.com , ASTM Staff Contact:, Katerina Koperna, tel +1.610.832.9728; kkoperna@astm.org Release #10006
-
A new ASTM test method will provide a simple and effective way to determine the tensile (pulling) and compressive (pushing) stress for metallic coatings used on a wide range of consumer products such as pens, doorknobs, lamps, cars, jewelry and more. The standard will also be used in the automotive, aerospace and military industries, particularly by companies that create metallic layers for parts…, ASTM Committee B0 8 on Metallic and Inorganic Coatings Next Meeting:, May 5, 2016, May Committee Week, San Antonio, Texas, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Frank H. Leaman, Specialty Testing and Development Company Inc., York, Pa., tel +1.717.891.4989; fleaman@specialtytest.com , ASTM Staff Contact:, Diane Lake, tel +1.610.832.9661; dlake@astm.org Release #9964
-
A proposed ASTM International standard will provide best practices for companies that coat pipe with porcelain enamel (glass) lining. Such lining has been used in municipal wastewater, sewage treatment and other water-related industries since the 1960s. Subcommittee B08.12 on Materials for Porcelain Enamel and Ceramic-Metal Systems is developing the standard. Porcelain enamel lining acts as a…, ASTM Committee B08 on Metallic and Inorganic Coatings Next Meeting:, Nov. 18-19, 2015, November Committee Week, Tampa, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Charles Baldwin, Ferro Corp., tel +1.216.875.6204; charles.baldwin@ferro.com, ASTM Staff Contact:, Diane Lake, tel +1.610.832.9661; dlake@astm.org Release #9827 ###
-
Keeping birds away from potentially fatal encounters with building exteriors is the purpose of a proposed new ASTM International standard, ASTM WK47853 , Test Method for Bird Collision Deterrence Material Threat Factor. It is possible that as many as a billion birds are killed every year after colliding with glass on buildings, including many single-family homes — and this is in the United States…, ASTM Committee C14 Next Meeting:, April 14, 2015, Moorestown, N.J., Technical Contact:, Stefan Knust, Ennead Architects, New York, New York, tel +1.212.807.7171; sknust@ennead.com, ASTM Staff Contact:, Thomas O’Toole, tel +1.610.832.9739; totoole@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9767
-
Overhead conductors used to transmit electricity typically consist of stranded aluminum wires that surround a stranded steel wire core. However, a more recently developed conductor consists of composite materials of carbon and glass fibers that replace the stranded steel-supporting member. This new type of conductor will be covered in a new ASTM International standard, ASTM B987 , Specification…, ASTM Committee B01 Next Meeting:, April 29, 2015, April Committee Week, Anaheim, Calif., Technical Contact:, Eric Bosze, Ph.D., CTC Global, Irvine, Calif., Phone: +1.949.381.7262; ebosze@ctcglobal.com, ASTM Staff Contact:, Kristy Straiton, Phone: +1.610.832.9640; kstraiton@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: +1.610.832.9603; bschindl@astm.org Release #9694
-
Bisphenol A, or BPA, is a high production volume chemical widely used in manufacturing polycarbonate plastics and epoxy resins that are used in many industries. Procedures described in a new ASTM International standard will be used for measuring BPA concentration in environmental media such as soils, sludges and biosolids. The new standard, ASTM D7858 , Test Method for Determination of Bisphenol…, ASTM Committee D34 Next Meeting:, Virtual meeting, Oct. 10-11, 2013, Technical Contact:, Lawrence Zintek, Ph.D., U.S. Environmental Protection Agency, Region 5 Chicago Regional Laboratory, Chicago, Ill., Phone: 312-886-2925; zintek.lawrence@epa.gov, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9456
-
ASTM B986 , Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application, will be used within the electronics and aerospace industries to validate tensile strength specification requirements for electrical conductors. ASTM B986 was developed by Subcommittee B01.02 on Methods of Test and Sampling Procedure , part of ASTM…, ASTM Committee B01 Next Meeting:, Oct. 23, 2013, October Committee Week, Jacksonville, Fla., Technical Contact:, Stephen Childers, IWG High Performance Conductors Inc., Inman, S.C., Phone: 864-472-0438; stephen.childers@iwghpc.com , ASTM Staff Contact:, Kristy Straiton, Phone: 610-832-9640; kstraiton@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9364