Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard identifies and defines sustainable laundry best management practices that are used by commercial laundry facilities to reduce their impact on the environment. ASTM D7841 , Practice for Sustainable Laundry Best Management Practices, was developed by Subcommittee D13.40 on Sustainability of Textiles , part of ASTM International Committee D13 on Textiles . “D7841…, Water Reuse Technology, —Technology or equipment within a laundry facility that reuses, reclaims or recycles water •, Boiler Heat Recovery, —Technology or equipment within a laundry facility that recovers heat produced from the facility’s water boiler system •, Energy Efficient Low-Temperature Detergents, —Detergents that are effective in eliminating pathogenic bacteria at low-wash temperatures •, Alternative Energy, —Solar or geothermal energy that clearly provides a minimum of 10 percent of the electrical energy used in the laundry •, Fleet Vehicle Route Optimization, —Use of software or technologies to maximize the efficiency of routes driven by fleet vehicles •, Recycling Programs, —Qualified waste recycling programs within a laundry facility Freeman, a D13.40 member, says industries that rely on the use of delivered laundered textiles will be the primary users of D7841 . “We expect D7841 to build awareness in the textile services marketplace of laundry sustainability, not only as an indicator of a provider’s longevity, but their ability to produce cost-effectively,” says…, ASTM Committee D13 Next Meeting:, Jan. 26-29, 2014, January Committee Week, Houston, Texas, Technical Contact:, Angela D. Freeman, TRSA, Alexandria, Va., Phone: 703-519-0029, ext. 111; afreeman@trsa.org, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9462
-
ASTM International Committee A06 on Magnetic Properties has approved a new standard that covers thin steel laminations used to increase the energy efficiency of many high performance motors and generators, including those in electric and hybrid-electric vehicles, and contemporary aircraft, power generation and military systems. The new standard, ASTM A1086 , Specification for Thin-Gauge…, ASTM Book of Standards Vol. 03.04 on Magnetic Properties, . To purchase this and other ASTM standards, visit www.astm.org and search by the standard designation, or contact ASTM Customer Relations (phone: 877-909-ASTM; sales@astm.org ). ASTM International welcomes participation in the development of its standards. For more information on becoming an ASTM member, visit www.astm.org/JOIN . For more news in this sector, visit www.astm.org/sn-metals or…, ASTM Committee A06 Next Meeting:, Nov. 11-12, 2013, November Committee Week, Jacksonville, Fla., Technical Contact:, Steve Sprague, Proto Laminations Inc., Santa Fe Springs, Calif., Phone: 909-338-3744; Email: ssprague@protolam.com , ASTM Staff Contact:, Kelly Paul, Phone: 610-832-9745; kpaul@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9460
-
ASTM International Committee F11 on Vacuum Cleaners has formed a new task group to develop proposed standards for high efficiency particulate air filtration, typically known as HEPA. The task group, part of Subcommittee F11.23 on Filtration, will develop standards to clarify methodology and criteria used to define HEPA filtration for sealed vacuum cleaner systems and filter components used in…, ASTM Committee F11 Next Meeting:, May 20-22, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Zoe Wilson, Bissell Homecare Inc., Grand Rapids, Mich., Phone: 616-735-5142; zoe.wilson@bissell.com , ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9338
-
All interested parties are invited to join in the ongoing development of ASTM International standard ASTM D3181 , Guide for Conducting Wear Tests on Textiles. The standard is now under the jurisdiction of Subcommittee D13.60 on Fabric Test Methods, Specific , part of ASTM International Committee D13 on Textiles . ASTM D3181 is used to provide data that will help predict the expected wear…, ASTM Committee D13 Next Meeting:, June 9-12, 2013, June Committee Week, Indianapolis, Ind., Technical Contact:, Norma M. Keyes, Keyes Consulting LLC, Apex, N.C., Phone: 919-362-4044; keyesconsult@att.net, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9320
-
The increase in the number of floor care products in the marketplace that employ wet extraction cleaning systems is the leading factor in the development of a standard that describes a laboratory test for the cleaning effectiveness of such systems. ASTM F2828 , Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning…, ASTM Committee F11 Next Meeting:, Nov. 12-14, November Committee Week, Atlanta, Ga., Technical Contact:, Kenneth M. Lee, Bissell Homecare Inc., Grand Rapids, Mich., Phone: 616-791-0608; ken.lee@bissell.com, ASTM Staff Contact:, Diane Trinsey, Phone: 610-832-9661; dtrinsey@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9290
-
Subcommittee D13.21 on Pile Floor Coverings is seeking experts who may be using ASTM D5251 , Practice for the Operation of the Tetrapod Walker Drum Tester. ASTM D5251 describes the equipment and operation of the Tetrapod Walker for testing unused pile floor coverings with a thickness of 20 mm or less. The subcommittee is hoping to gauge the current level of interest in ASTM D5251. D13.21, which…
-
All interested parties are invited to join in the development of a proposed new ASTM International standard that will identify and define sustainable best management practices that are used in commercial laundry facilities to reduce their impact on the environment. ASTM WK35985 , Practice for Sustainable Laundry Best Management Practices, is being developed by Subcommittee D13.40 on…, ASTM Committee D13 Next Meeting:, June 24-27, 2012, June committee week, San Diego, Calif., Technical Contact:, Gary D. Gramp, Textile Rental Services Association, Alexandria, Va., Phone: 703-519-0029, ext. 111; ggramp@trsa.org, ASTM Staff Contact:, Jennifer Rodgers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9101
-
All interested parties are invited to join a new ASTM task group that will be developing standards to measure the performance of battery operated vacuum cleaners. The task group is under the jurisdiction of ASTM International Committee F11 on Vacuum Cleaners . Task Group F11.50.13 on the Development of ASTM Standard Test Methods for the Measurement of Battery-Powered Vacuum Cleaner Performance is…
-
A new ASTM International test method will provide an effective screening method to identify magnets that are subject to excessive corrosion in high humidity environments. ASTM A1071/A1071M , Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys, was developed by Subcommittee A06.01 on Test Methods , part of ASTM International Committee A06 on Magnetic Properties…
-
ASTM International Committee A06 on Magnetic Properties welcomes the participation of all stakeholders with an interest in the development of international standards for magnetic materials and magnetic properties. The committee will hold its biannual meeting this fall. ASTM Committee A06, which was formed in 1903, oversees approximately 50 standards dealing with magnetic materials and magnetic…, ASTM Staff Contact:, Kelly Paul, Phone: 610-832-9745; kpaul@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8975