Search
Advanced search
Filter by category
Filter by committee
Search results
-
Maybe you haven’t given much thought to the growth of interlaminar cracks, or cracks in between layers, in laminated composite materials. Perhaps you should though, because such materials are everywhere and interlaminar cracks can cause serious damage to many types of structures and products, from sports equipment to spacecraft. This is why a new ASTM standard, D7905/D7905M , Test Method for…, Technical Contact:, Barry D. Davidson, Ph.D. Syracuse University, Syracuse, N.Y., tel +1.315.443.4201; bddavids@syr.edu, ASTM Staff Contact:, Ashley Wiand, tel +1.610.832.9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9724
-
A proposed new ASTM International standard will be helpful in selecting glass or glazing that has a proper communication transmittance rate for the location in which it is being used. ASTM WK41897 , Test Method for EMI Transmittance and Shielding Rating for Glazing Infill, is being developed by Subcommittee F12.10 on Systems Products and Services , part of ASTM International Committee F12 on…, ASTM Committee F12 Next Meeting:, Oct. 21-21, 2013, October Committee Week, Jacksonville, Fla., Technical Contact:, Julia Schimmelpenningh, Eastman Chemical Co., Springfield, Mass., Phone: 413-730-3413; jcschi@eastman.com , ASTM Staff Contact:, Joseph Hugo, Phone: 610-832-9740; jhugo@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9421
-
In a quest for lighter, more crash-resistant and fuel-efficient vehicles, the automobile and steel industries are developing steel sheets that have higher alloy content, and thus more complex hardening mechanisms, than sheets currently being used. The sheets, known generally as advanced high-strength steels, are covered by a new ASTM International standard, ASTM A1079 , Specification for Steel…, ASTM Committee A05 Next Meeting:, Nov. 11-13, November Committee Week, Atlanta, Ga., Technical Contact:, Gary Dallin, GalvInfo Center, International Zinc Association, Burlington, Ontario, Canada, Phone: 905-315-7443; gdallin@cogeco.ca, ASTM Staff Contact:, Kristy Straiton, Phone: 610-832-9640; kstraiton@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9304
-
It happens all too often: a driver suddenly loses control of a car, sending it into a storefront or other pedestrian area. Property damage and serious injuries, sometimes fatal, can result from these accidents. In an effort to minimize the damage caused by such crashes, ASTM International Committee F12 on Security Systems and Equipment is developing a proposed new standard, ASTM WK13074 , Test…, ASTM Committee F12 Next Meeting:, Oct. 22-24, 2012, October Committee Week, Atlanta, Ga., Technical Contacts:, Rob Reiter, Storefront Safety Consultant, Phone: 909-964-2906; r ob.reiter.pp@gmail.com ; Dean Alberson, Texas Transportation Institute, Texas A&M University, Phone: 979-458-3874; d-alberson@tamu.edu, ASTM Staff Contact:, Joseph Hugo, Phone: 610-832-9740; jhugo@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindler@astm.org R elease #9263
-
A new ASTM International standard that will help ensure the accurate use of micrometers in the measurement of a type of steel sheet has been developed and approved by ASTM International Committee A05 on Metallic-Coated Iron and Steel Products . ASTM A1073/A1073M , Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet, is under the…, ASTM Committee ASTM Committee A05 Next Meeting:, Nov. 11-13, 2012, November Committee Week, Atlanta, Ga., Technical Contact:, Herbert W. Koch, Harris Steel Co., Chicago, Ill., Phone: 708-656-5500; hkoch@harrissteelco.com, ASTM Staff Contact:, Kristy Straiton, Phone: 610-832-9640; kstraiton@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9254
-
A new ASTM International standard fills an industry need for damage resistance testing of sandwich constructions, a common composite structural configuration. ASTM D7766/D7766M , Practice for Damage Resistance Testing of Sandwich Constructions, was developed by Subcommittee D30.09 on Sandwich Construction , part of ASTM International Committee D30 on Composite Materials . “ASTM D7766/D7766M will…, Technical Contact:, Adam J. Sawicki, Boeing Co., Philadelphia, Pa., Phone: 610-591-2807; adam.j.sawicki@boeing.com, ASTM Staff Contact:, Ashley Wiand, Phone: 610-832-9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9195
-
A new ASTM International standard, adopted from an American Concrete Institute test method, will be used to help ensure the safety of construction projects. ASTM C1741 , Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout, is under the jurisdiction of Subcommittee C09.41 on Hydraulic Cement Grouts , part of ASTM International Committee C09 on Concrete and Concrete…
-
Piston ring/liner interface can contribute as much as half the total friction loss in internal combustion engines, with the resulting wear leading to reduced energy efficiency and raised emissions. A new ASTM International standard provides a method to more accurately measure small amounts of wear on curved piston ring segments and their counterfaces after lubricated bench-scale testing. “Coupled…
-
A new ASTM International standard will answer industry’s need for determination of fatigue properties of open-hole composite laminates. ASTM D7615/D7615M , Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates, was developed by Subcommittee D30.05 on Structural Test Methods , part of ASTM International Committee D30 on Composite Materials . The purpose of ASTM D7615/D7615M…, ASTM Committee D30 Next Meeting:, Oct. 17-19, 2011, in conjunction with the Society for the Advancement of Material and Process Engineering, Fort Worth, Texas, Technical Contact:, Mark Chris, Bell Helicopter Textron, Inc., Dallas, Texas, Phone: 817-280-872; mchris@bellhelicopter.textron.com, ASTM Staff Contact:, Ashley Wiand, Phone: 610-832-9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8914
-
Owners and specifiers of steel building projects will be the primary users of a new ASTM International standard, ASTM A1068 , Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products. The new standard was developed by Subcommittee A05.13 on Structural Shapes and Hardware Specifications, part of ASTM International Committee A05 on Metallic-Coated Iron and…