Search
Advanced search
Filter by category
Filter by committee
Search results
-
If a leather article such as a shoe or a glove were left next to a heater for an extended period of time, would the finish remain soft and flexible or would it change color and develop cracks within the leather finish? A new ASTM International standard will help to answer that question, giving manufacturers a clear method to predict and prevent such problems. ASTM D7912 , Test Method for…, Technical Contact:, Kadir Donmez, Leather Research Laboratory, University of Cincinnati, Cincinnati, Ohio, Phone: 513-242-6300; donmezk@uc.edu, ASTM Staff Contact:, Ashley Wiand, Phone: 610-832-9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9623
-
In a quest for lighter, more crash-resistant and fuel-efficient vehicles, the automobile and steel industries are developing steel sheets that have higher alloy content, and thus more complex hardening mechanisms, than sheets currently being used. The sheets, known generally as advanced high-strength steels, are covered by a new ASTM International standard, ASTM A1079 , Specification for Steel…, ASTM Committee A05 Next Meeting:, Nov. 11-13, November Committee Week, Atlanta, Ga., Technical Contact:, Gary Dallin, GalvInfo Center, International Zinc Association, Burlington, Ontario, Canada, Phone: 905-315-7443; gdallin@cogeco.ca, ASTM Staff Contact:, Kristy Straiton, Phone: 610-832-9640; kstraiton@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9304
-
A new ASTM International standard that will help ensure the accurate use of micrometers in the measurement of a type of steel sheet has been developed and approved by ASTM International Committee A05 on Metallic-Coated Iron and Steel Products . ASTM A1073/A1073M , Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet, is under the…, ASTM Committee ASTM Committee A05 Next Meeting:, Nov. 11-13, 2012, November Committee Week, Atlanta, Ga., Technical Contact:, Herbert W. Koch, Harris Steel Co., Chicago, Ill., Phone: 708-656-5500; hkoch@harrissteelco.com, ASTM Staff Contact:, Kristy Straiton, Phone: 610-832-9640; kstraiton@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9254
-
Owners and specifiers of steel building projects will be the primary users of a new ASTM International standard, ASTM A1068 , Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products. The new standard was developed by Subcommittee A05.13 on Structural Shapes and Hardware Specifications, part of ASTM International Committee A05 on Metallic-Coated Iron and…
-
Wet blue and wet white are intermediate products used by tanneries that process natural hides and skins into leather. Natural fats and oils need to be largely removed from wet blue and wet white for leather processing to be done properly, but no standard had previously existed to evaluate the effectiveness of such removal. ASTM International Committee D31 on Leather has now developed such a…
-
Dental dams are rectangular sheets of latex used to isolate specific teeth during dental procedures. Testing laboratories, as well as manufacturers of dental dams, exercise bands, rubber bands and tourniquets will be the primary users of a proposed new ASTM standard on dental dams. ASTM WK28312 , Test Method for Quantitation of Powder on Dental Dams, is currently being developed by Subcommittee…, ASTM Committee D11 Next Meeting:, June 13-16, 2011, June Committee Week, Anaheim, Calif., Technical Contact:, Kelly Horton, LEAP Testing Service, Sayre, Pa., Phone: 570-882-4645; horton_kelly@guthrie.org, ASTM Staff Contact:, Joe Koury, Phone: 610-832-9804; jkoury@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8755
-
Laura Koss of Federal Trade Commission to Provide FTC Perspective, ASTM International Committee D13 on Textiles will sponsor a workshop, The Textile Industry and the Green Challenge: A Federal Trade Commission Perspective, on Tuesday Jan. 31, 2011, from Noon-1:30 p.m. EDT. The workshop will take place during the D13 standards development meetings, which will be held Jan. 30-Feb. 2 at the Baltimore Marriott Waterfront in Baltimore, Md. The workshop will provide a…, ASTM Committee D13 Next Meeting:, Jan. 30-Feb. 2, 2011, January Committee Week, Baltimore, Md., Technical Contact:, Vincent Diaz, Atlantic Thread & Supply Co., Baltimore, Md., Phone: 410-687-9424; vince@atlanticthread.com, ASTM Staff Contact:, Jennifer Rogers, Phone: 610-832-9694; jrodgers@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #8756
-
A new ASTM International standard will provide a fast and effective way to test production lots of thermoplastic elastomers in order to quantify and predict how well they process and what ultimate physical properties will be imparted to final molded or extruded products. ASTM D7605 , Test Method for Thermoplastic Elastomers — Measurement of Polymer Melt Rheological Properties and Congealed…
-
Subcommittee A05.13 on Structural Shapes and Hardware Specifications is currently working on proposed new standards that would be used by engineers and architects who design with steel fabrications. These proposed standards will be used to evaluate the costs of steel construction over the lifetime of a project and to compare different corrosion protection systems on their impact to this lifetime…
-
The impact of health care related infections is a global concern, and hands are a leading means of direct or indirect transport of infectious microorganisms. A task group within Subcommittee D11.40 on Consumer Rubber Products has begun to develop standards focused on preventing that transfer through the use of antimicrobial agents on gloves. D11.40 is part of ASTM International Committee D11 on…