Search
Advanced search
Filter by category
Filter by committee
Search results
-
Subcommittee A05.13 on Structural Shapes and Hardware Specifications is currently working on proposed new standards that would be used by engineers and architects who design with steel fabrications. These proposed standards will be used to evaluate the costs of steel construction over the lifetime of a project and to compare different corrosion protection systems on their impact to this lifetime…
-
ASTM International Committee D03 on Gaseous Fuels invites all interested parties to participate in their standards developing activities. Proposed new standards currently being developed by subcommittees within D03 include ASTM WK24874, Test Method for the Determination of Moisture Vapor Concentration in Natural Gas and by Tunable Diode Laser Spectroscopy (TDLAS), and ASTM WK24875 , Practice for…, Tunable Diode Laser Spectroscopy, The proposed new standard, ASTM WK24874 , is being developed at the request of several gas companies that use TDLAS analyzers for the measurement of moisture in natural gas. While TDLAS has become a popular type of gas analysis, no specific standard currently exists for its use. ASTM WK24874 is under the jurisdiction of Subcommittee D03.12 on On-Line/At-Line Analysis of Gaseous Fuels. According…, Siloxanes, While biofuel from landfills and sewage digestion has been used as fuel for local gas turbine engines, it is necessary to hold the content of siloxanes within the fuel down to 50 parts per billion. Siloxanes that can coat the turbine under working conditions are converted to an abrasive silicone dioxide coating that greatly reduces the lifetime of the engine. ASTM WK24875 is currently being…
-
Rapid hardening hydraulic cements are used in a variety of applications in which reduced cementitious contents are desired or early service is needed. Included among these applications are paving, construction, stucco, mortar and block. A newly approved ASTM International standard covering these cements, ASTM C1600/C1600M , Specification for Rapid Hardening Hydraulic Cement, has been developed by…, Type URH, —ultra rapid hardening, for use where ultra high early strength is desired;, Type VRH, —very rapid hardening, for use where very high early strength is desired;, Type MRH, —medium rapid hardening, for use where mid-range rapid hardening, high early strength is desired; and, Type GRH, —general rapid hardening, for use when the higher strength properties of Type VRH or a Type MRH cement is not required. “ASTM C1600 lists minimum requirements for compressive strength, setting time, shrinkage and soundness (autoclave expansion),” says Hicks. “Optional specifications for sulfate expansion, alkali silicate reactions with aggregates, heat of hydration and expansion in water are also…
-
Sulfur compounds are known for their smell, but odor isn’t the only issue sulfur compounds create, at least when found in various kinds of gas. Too much sulfur in gaseous fuels, such as natural gas, petroleum gases and biogases, can be corrosive to equipment, result in regulatory issues, and can inhibit or destroy catalysts used in gas processing and utilization equipment. However, sulfur gases…
-
ASTM International Committee A05 on Metallic-Coated Iron and Steel Products has approved a new standard, ASTM A1059/A1059M , Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware and Other Products. The new standard is under the jurisdiction of Subcommittee A05.13 on Structural Shapes and Hardware Specifications. The technology described in ASTM A1059/A1059M…
-
Galvanized steel products are manufactured and used throughout the world. A new ASTM International standard, A1057/A1057M , Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process, addresses the galvanizing process as it is used across a variety of industries, including construction, automotive and transportation. The new standard…
-
A recently approved revision to ASTM International standard C 150 , Specification for Portland Cement, includes three significant technical changes to the document. The changes are part of a joint effort between ASTM and the American Association of State and Highway and Transportation Officials to harmonize C 150 with AASHTO’s standard, M 85, Specification for Portland Cement. C 150 is under the…
-
ASTM International Committee B08 on Metallic and Inorganic Coatings has recently approved a revision of one of its most important standards, B 633 , Specification for Electrodeposited Coatings of Zinc on Iron and Steel. B 633 is under the jurisdiction of Task Group B08.08.04 on Soft Metals, which is part of Subcommittee B08.08 on Metallic Coatings. Zinc coatings are used to provide a sacrificial…
-
ASTM International Committee A05 on Metallic-Coated Iron and Steel Products will host a workshop, Hazardous Substances Affecting Metallic-Coated Steel and Other Metals, on May 23, 2007, during ASTM Committee Week in Norfolk, Va. The workshop will begin at 8:00 a.m. The topic will be the European Parliament and Council Directive on the Restrictions and use of certain Hazardous Substances in…
-
ASTM International Committee D03 on Gaseous Fuels has developed a new standard that will become a valuable reference for engineers designing equipment for the efficient generation, transport, storage, and delivery of hydrogen to vehicles and appliances. The standard, D 7265 , Specification for Hydrogen Thermophysical Property Tables, is under the jurisdiction of Subcommittee D03.08 on…