Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International practice provides a standard for preparing a mixture of cement paste that will simulate the shearing experienced by the cement paste in concrete. The new standard, ASTM C1738 , Practice for High-Shear Mixing of Hydraulic Cement Pastes, was developed by Subcommittee C01.22 on Workability , part of ASTM International Committee C01 on Cement . According to Chiara Ferraris,…
-
A new ASTM International standard covers the inspection requirements agreed upon by the purchaser and producer of steel castings for the sample castings prior to production of an order. The new standard, ASTM A1062 , Specification for Steel Castings Sampling, has been developed by Subcommittee A01.18 on Castings , part of ASTM International Committee A01 on Steel, Stainless Steel and Related…
-
A new ASTM International subcommittee has been created to develop standards that will be meaningful and accurate performance indicators to measure work-related injury and illness performance throughout the world. Subcommittee E34.55 on Occupational Safety and Health Performance Improvement is under the jurisdiction of ASTM International Committee E34 on Occupational Health and Safety. “Measuring…
-
ASTM International Subcommittee A01.05 on Steel Reinforcement has made a significant revision to ASTM A706/A706M , Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement. A higher yield strength level, namely Grade 80 [550], has been added to the standard. The term “grade” relates to minimum yield strength in units of “kps/in.2 (megapascals),” i.e., “Grade 80 [550]”…
-
The
-
ASTM Committee A01 on Steel, Stainless Steel and Related Alloys has now published a versatile new standard, A1064/A1064M , Specification for Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete. The new standard is under the jurisdiction of Subcommittee A01.05 on Steel Reinforcement. Ted Mize, P.E., senior engineer, Ivy Steel & Wire, and an A01.05 member, notes that ASTM…, ASTM Committee A01 Next Meeting:, May 17-20, May Committee Week, St. Louis, Mo., Technical Contact:, Ted Mize, Ivy Steel & Wire, Concord, Calif., Phone: 925-685-9141, tmize@ivysteel.com, ASTM Staff Contact:, George Luciw, Phone: 610-832-9710, gluciw@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #844 3/Dec2009
-
ASTM International Subcommittee E34.50 on Health and Safety Standards for Metalworking Fluids has developed three new standards. Two of the recently approved ASTM standards cover aspects of water-miscible metalworking fluids, while the third concerns prevention of dermatitis in the wet metal removal fluid environment., Prevention of Dermatitis, Dermatitis is an inflammatory response of the skin to a chemical or physical agent. While redness, swelling and itching are typical signs of dermatitis, symptoms can be more severe as well. A new ASTM standard, ASTM E2693 , Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment, discusses dermatitis and its causes and presents a comprehensive approach to dermatitis…, Metalworking Fluids, Two new E34.50 standards address the detection of microbial contamination in metalworking fluids: ASTM E2657 , Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids, and ASTM E2694 , Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids. Both ASTM E2657 and ASTM E2694 measure biological contamination in metalworking…, Participation Invited, The subcommittee is currently looking for participants for an interlaboratory study for ASTM E2657 and ASTM E2694 . “We plan to use a single set of MWF for both standards, so labs who are interested in either or both are welcome to participate,” says Passman. “A few labs will run both the ILS’s for both standards, while most will run one or the other.” Subcommittee E34.50 is part of ASTM…
-
Rapid hardening hydraulic cements are used in a variety of applications in which reduced cementitious contents are desired or early service is needed. Included among these applications are paving, construction, stucco, mortar and block. A newly approved ASTM International standard covering these cements, ASTM C1600/C1600M , Specification for Rapid Hardening Hydraulic Cement, has been developed by…, Type URH, —ultra rapid hardening, for use where ultra high early strength is desired;, Type VRH, —very rapid hardening, for use where very high early strength is desired;, Type MRH, —medium rapid hardening, for use where mid-range rapid hardening, high early strength is desired; and, Type GRH, —general rapid hardening, for use when the higher strength properties of Type VRH or a Type MRH cement is not required. “ASTM C1600 lists minimum requirements for compressive strength, setting time, shrinkage and soundness (autoclave expansion),” says Hicks. “Optional specifications for sulfate expansion, alkali silicate reactions with aggregates, heat of hydration and expansion in water are also…
-
A new ASTM International standard will serve as a guide for manufacturers and laboratories that make and test steel products according to standards using the SI system of units. The new standard, ASTM A1058 , Test Methods for Mechanical Testing of Steel Products—Metric, arose from a need for a stand-alone metric steel testing standard, according to Lester Burgess, director of quality, TSP/U.S.…
-
Providing customer reassurance that high performance corrosion resistant steel will meet a given set of criteria is the purpose of a new ASTM International standard recently approved by Committee A01 on Steel, Stainless Steel and Related Alloys. The new standard, ASTM A1055 , Specification for Zinc and Epoxy Dual Coated Steel Reinforcing Bars, is under the jurisdiction of Subcommittee A01.05 on…