Search
Advanced search
Filter by category
Filter by committee
Search results
-
For more than 100 years, cork tile has been commonly used as a floor and wall covering for residential and commercial use. A new ASTM International standard, ASTM F3008 , Specification for Cork Floor Tile, specifies requirements for cork floor coverings made from agglomerated composition cork supplied in tile form, which is designed to be used with a factory finish or an in situ finish, or both.…, ASTM Committee F06 Next Meeting:, May 7-8, 2014, Clearwater, Fla., Technical Contact:, Christopher Capobianco, Spartan Surfaces, Patchogue, N.Y., Phone: 631-275-6494; christopher@spartansurfaces.com, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9523
-
Rare earth elements and rare earth materials are common in a wide variety of products, from cell phones to electric cars and beyond. Thus, REEs and REMs have become a critical component in the economies of many developing countries. Specifications and test methods are needed to determine if the purchased quality of REEs and REMs meets the specified quality. One such proposed standard is ASTM…, ASTM Committee F40 Next Meeting:, March 10-13, 2014, Shanghai, China, Technical Contact:, Taco van der Maten, PANalytical, Almelo, The Netherlands, Phone: +31-546-534-372; taco.van.der.maten@panalytical.com, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9527
-
As rare earth materials play an increasingly critical role in the growth of global industries, an ASTM International subcommittee is gearing up to address challenges across the life cycle of these vital resources. ASTM Subcommittee F40.04 on Rare Earth Materials held its most recent meeting in April and has established a standards development agenda aimed at supporting efficient and safe…, Stimulating the Worldwide Supply Chain, The increased demand for rare earth materials has converged with supply bottlenecks, resulting in a looming shortage of these resources throughout the worldwide high-tech, energy and automotive sectors. To better ensure that rare earths are more readily available for industry use, public and private sector stakeholders are focusing on ways to diversify supplies. Strategies include improving…, Protecting Our Energy Future, Underscoring the importance of rare earth materials to clean energy growth, the U.S. Department of Energy has established the Critical Materials Institute (CMI) at its Ames Laboratory in Ames, Iowa. The institute will bring together leading experts from academia, national laboratories and the private sector to find solutions to help avoid a rare earth supply shortage. Dr. Alex King, director of…, ASTM Committee F40 Next Meeting:, Nov. 13-14, 2013, November Committee Week, Jacksonville, Fla., Technical Contact:, Taco van der Maten, PANalytical B.V., Almelo, The Netherlands, Phone: +31-546-534-372; taco.van.der.maten@panalytical.com, ASTM Staff Contact:, Alyson Fick, Phone: 610-832-9710; afick@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9406
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375
-
A recently published ASTM International standard covers a new type of resilient flooring tile product based on a polyester binder. ASTM F2982 , Specification for Polyester Composition Floor Tile, was developed by Subcommittee F06.80 on Specifications , part of ASTM International Committee F06 on Resilient Floor Coverings . “ ASTM F2982 sets forth an explicit set of compositional and performance…, ASTM Committee F06 Next Meeting:, May 22-23, 2013, May Committee Week, Indianapolis, Ind., Technical Contact:, Thomas Erisman, Armstrong World Industries, Lancaster, Pa., Phone: 717-396-5354; tcerisman@armstrong.com, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9271
-
Public policy decisions on rare earth materials will have an influence on industry and affect future standardization efforts. Acknowledging this importance, ASTM International Committee F40 on Declarable Substances in Materials has formed a new subcommittee, F40.04 on Rare Earth Materials. The subcommittee, which will promote knowledge, stimulate research and implement technology through the…, ASTM Committee F40 Next Meeting:, Nov. 14-15, 2012, November Committee Week, Atlanta, Ga., Technical Contact:, Taco van der Maten, PANalytical B.V., Almelo, The Netherlands, Phone: +31-546-534-372; taco.van.der.maten@panalytical.com, ASTM Staff Contact:, Alyson Fick, Phone: 832-9710; afick@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org R elease #9309
-
Slats inserted into chain link fences can provide up to 95 percent more privacy and enhance the aesthetic appeal of a fence. A proposed new ASTM International specification will answer the need for better standardization of these privacy slats. ASTM WK36470 , Specification for Privacy Slats for Chain Link Fence, is being developed by Subcommittee F14.40 on Chain Link Fence and Wire Accessories ,…
-
ASTM International Committee F14 on Fences welcomes participation in the development of a proposed new standard, ASTM WK36054 , Guide for Anchoring Steel Fence and Gate Posts in Lieu of Concrete Footings. The proposed standard is under the jurisdiction of Subcommittee F14.15 on Other Fence Systems and Components . According to Ray Statz, chairman, Qual Line Fence Corp., and chairman of F14.15,…
-
Non-destructive moisture meters are now widely used in determining moisture levels in concrete, gypsum concrete and other types of floor slabs. A new ASTM International standard qualifies the types of meter suitable for this purpose and provides guidelines for how, where and when such moisture meters are used and what limitations exist. The new standard, ASTM F2659 , Guide for Preliminary…, ASTM Committee F06 Next Meeting:, Nov. 10-11, New Orleans, La., Technical Contact:, Sean Fallon, Dublin, Ireland, Phone: +011-353-1-285-1861; seanfallon@ireland.com, ASTM Staff Contact:, Stephen Mawn, Phone: 610-832-9726; smawn@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #870/Oct2010
-
A new ASTM International standard will provide the means to quickly detect and quantify the lead concentration in toys and other children's products. The new standard, F2853 , Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams, was…