Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s hazardous substances and oil spill response committee ( F20 ) has approved two new standards that will each enhance knowledge essential for oil spill response. The new standards will be used primarily by oil laboratories. “The new standards describe measures designed to answer the question of how sticky oil is ( F3633 ) and how to make standard mixtures of weathered, or…, Media Inquiries:, Gavin O’Reilly, tel +1.610.832.9618; goreilly@astm.org, Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org l Release #11655 ###
-
ASTM International’s 3D imaging systems committee ( E57 ) is developing a proposed standard that will provide guidance for robotic bin-picking systems used for sorting, assembling, and packaging items in industrial environments. “Robotic bin-picking systems are becoming popular in many industrial applications,” says ASTM committee E57 vice-chair Kamel Saidi, Ph.D. “These systems are used for…
-
A proposed ASTM International standard is intended to focus on robotic assembly applications. ASTM’s 3D imaging systems committee ( E57 ) is developing the proposed standard ( WK72962 ), which should be the first in a series of standards on 3D, or depth perception, systems. According to ASTM International member John Sweetser, principal engineer, Intel Corp/Realsense Group, there are currently…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #11033 ###
-
A new ASTM International standard could help both with contingency planning for oil spills as well as management of oil spills. According to ASTM International member Merv Fingas, the new guide standardizes the way laboratories both prepare and measure “weathered oil,” which is naturally different from the “source oil” at a facility. “This is important because, after an oil spill occurs, the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org Release #10771
-
Yesterday, more than 50 government and industry officials decided to launch a new ASTM International committee dedicated to developing standards in the area of commercial spaceflight. The Committee on Commercial Spaceflight (F47) will focus on standards development in areas such as occupant safety of orbital and suborbital vehicles, launch and reentry vehicles, and spaceports. James Thomas,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, ASTM Staff Contact:, Kristy Straiton, tel +1.610.832.9640; kstraiton@astm.org Release #10195
-
A proposed ASTM standard is being developed by Committee E57 on Imaging Systems to provide a standardized set of metrics and a test procedure for evaluating the performance of optical tracking systems. Such systems are used in a wide range of fields, including video gaming, filming, neuroscience, biomechanics, flight/medical/industrial training, simulation, robotics, and automotive applications.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Tsai Hong, National Institute of Standards and Technology, Gaithersburg, Md., tel +1.301.975.3444; tsai.hong@nist.gov, ASTM Staff Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #10187
-
With support from industry and government leaders, ASTM International will host an organizational meeting to potentially create a new technical committee that develops voluntary consensus standards for commercial spaceflight. This meeting comes in part as a result of the updated U.S. Commercial Space Launch Competitiveness Act of 2015 (CSLCA). The U.S. Federal Aviation Administration’s…, ASTM Commercial Spaceflight Meeting:, Oct. 24, 2016, RTCA, Inc.; 1150 18th St. NW, 4th Floor, Washington, DC 20036, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, ASTM Staff Contact:, Christine DeJong, tel +1.610.832.9736; cdejong@astm.org Release #10170
-
ASTM International and the Open Geospatial Consortium (OGC) will collaborate on developing and disseminating standards, best practices, and other tools that support the growing geospatial industry. The organizations plan to work together in areas such as data acquisition and dissemination, location-based services, and unmanned (autonomous) navigation. Daniel Smith, vice president, technical…, Media Inquiries:, Nathan Osburn, director, corporate communications, ASTM International, tel +1.610.832.9603, nosburn@astm.org or Denise McKenzie, executive director, communications & outreach, OGC, tel +1.314.546.4569, dmckenzie@opengeospatial.org, ASTM Staff Contact:, Pat Picariello, director, developmental operations, tel +1.610.832.9720; ppicariello@astm.org, OGC Staff Contact:, Scott Simmons, executive director, standards program, tel +1.970.682.1922; ssimmons@opengeospatial.org Release #10034
-
A new ASTM International standard will help oil spill responders evaluate the stability of water-in-oil mixtures. Specifically, the new standard (soon to be published as F3045, Test Method for the Evaluation of the Stability of Water-in-Oil Mixtures Formed from Crude Oil and Petroleum Products Mixed with Saline Water) provides a laboratory test method to determine the tendencies of emulsions and…, ASTM Committee F20 on Hazardous Substances and Oil Spill Response Next Meeting, : Oct. 25-26, 2016, October Committee Week, Orlando, Fla., Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Mervin Fingas, Edmonton, Alberta, Canada, tel +1.780.989.6059; fingasmerv@shaw.ca , ASTM Staff Contact:, Jeffrey Adkins, tel +1.610.832.9738; jadkins@astm.org Release #9936
-
Manufacturers and users of laser scanners used in 3D imaging will benefit from a new ASTM standard that helps evaluate their measurement performance. Specifically, the standard will help evaluate time-of-flight imaging systems, which determine measurements by detecting the reflected light from a scene illuminated by a modulated light source. The new standard is E2938 , Test Method for Evaluating…, Media Inquiries:, Nathan Osburn, tel +1.610.832.9603; nosburn@astm.org, Technical Contact:, Kamel S. Saidi, Ph.D., National Institute of Standards and Technology, Gaithersburg, Md., tel. +1.301.975.6069; kamel.saidi@nist.gov , ASTM Staff Contact:, Pat Picariello, tel +1.610.832.9720; ppicariello@astm.org Release #9897