Search
Advanced search
Filter by category
Filter by committee
Search results
-
ASTM International’s performance of buildings committee ( E06 ) has developed a new test method for moisture in insulating glass. The test method introduced in this standard, currently known as WK83631 , will measure moisture ingress into insulating glass, and allow for predicting window lifetimes. Insulated glass is often used in residential and industrial locations to maintain heat and humidity…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Frank McConnell, tel +1.610.832.9686; fmcconnell@astm.org Release #11582 ###
-
A new ASTM International standard will describe in detail the design and specification process for water vapor transmission properties of water-resistive barriers and air barriers(WRB/AB) in building construction. ASTM’s performance of buildings committee ( E06 ) developed the new standard, which will soon be published as E3127. ASTM International member Danko Davidovic says that the new standard…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Steve Mawn, tel +1.610.832.9726; smawn@astm.org Release #11441 ###
-
A proposed ASTM International standard will help engineers to better understand how various climates affect water vapor transmission of water-resistive barriers and air barriers (WRB/AB) in building envelopes. ASTM’s performance of buildings committee ( E06 ) is developing the proposed standard. ASTM International member Danko Davidovic says that the proposed standard ( WK51917 ) will explain…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org , Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #11213 ###
-
A new ASTM International standard will help architects who are designing mockup structures used to prepare for the construction of a new building. ASTM’s committee on performance of buildings ( E06 ) developed the standard, which will soon be approved as E3223. ASTM International member Eric Peterson notes that when new buildings are constructed, especially large complex buildings with intricate…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org , Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #11152 ###
-
A new standard practice developed by ASTM International’spedestrian/walkway safety and footwear committee ( F13 ) provides insight on the selection of walkway surfaces when considering pedestrian safety. This standard, soon to be available as F3132, outlines key elements for selecting new or planned walkway surfaces for reduced risk of slips and falls. “Current built environment design standards…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, Travis Murdock, tel +1.610.832.9826; tmurdock@astm.org Release #11109 ###
-
A proposed standard will be used to support the periodic assessment of cavity wall facades. ASTM’s committee on the performance of buildings (E06) is developing the standard. In cavity wall facades, a grid of wall ties provides lateral restraint between the exterior veneer and the back-up wall. The proposed guide will support stability assessments of such facades. According to ASTM member Michael…
-
In light of COVID-19 (coronavirus) and ongoing safety concerns for members and staff, ASTM International announced today that all previously scheduled in-person May standards development meetings (including independent meetings) have been canceled. Earlier this month, ASTM International announced the cancellation of all April in-person meetings . These decisions were based on several factors,…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #11001 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
ASTM International’s performance of buildings committee ( E06 ) is developing a proposed standard ( WK70955 ) that will help evaluate potential impacts of changes to the thermal and moisture properties of roof assemblies and the conditioning of space below roof decks. Specifically, the standard could help evaluate steep-sloped roof assemblies after: adding insulation; making alterations in…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Stephen Mawn, tel +1.610.832.9726; smawn@astm.org Release #10970
-
Recently-approved revisions to three footwear standards align them with each other, helping test laboratories and users have greater confidence that product conformance reports will include the most current corresponding data for both testing and performance. One of the revised standards covers test methods for foot protection ( F2412 ). The remaining two are specifications for performance…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, Molly Lynyak, tel +1.610.832.9743; mlynyak@astm.org Release #10670