Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard will provide a test method related to unfixed chrome concentrations in Wet Blue. The standard, soon to be published as D8451, was developed by ASTM’s committee on leather ( D31 ). According to ASTM International member Okey Abara, Wet Blue is an intermediate product used for processing natural hides. It is produced when a tanning agent chemically binds to the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, David Lee, tel +1.610.832.9681; dlee@astm.org Release #11463 ###, ,
-
ASTM International’s committee on leather ( D31 ) is developing a proposed standard that will help to assess the effect of various soling agents on leather. The primary aim of the proposed standard ( WK74216 ) is to assess the degree of resistance and cleanability of a leather surface after it has been in contact with potential staining agents. Among the effects covered in the standard are…, Media Inquiries: , Dan Bergels, tel +1.610.832.9602; dbergels@astm.org , Committee Contact:, David Lee, tel +1.610.832.9681; dlee@astm.org Release #11097 ###
-
A new ASTM International standard will be used to determine the alkalinity of oils used to soften the stuffing of leather products. ASTM’s leather committee (D31) developed the standard, which will soon be published as D8284. Total alkalinity is a chemical measurement of water’s ability to resist change in pH, also known as water buffering capacity. According to ASTM International member…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact: , David Lee, tel +1.610.832.9681; dlee@astm.org Release #10879
-
A new standard developed by ASTM International’s leather committee (D31) provides test methods to estimate its longevity. This new test method (soon to be published as D8137) provides a way to evaluate longevity considering everyday atmospheric conditions like smog and corrosive gases. ASTM International member Kadir Donmez, associate director of the leather research laboratory at the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, David Lee, tel +1.610.832.9681; dlee@astm.org Release #10582
-
If a leather article such as a shoe or a glove were left next to a heater for an extended period of time, would the finish remain soft and flexible or would it change color and develop cracks within the leather finish? A new ASTM International standard will help to answer that question, giving manufacturers a clear method to predict and prevent such problems. ASTM D7912 , Test Method for…, Technical Contact:, Kadir Donmez, Leather Research Laboratory, University of Cincinnati, Cincinnati, Ohio, Phone: 513-242-6300; donmezk@uc.edu, ASTM Staff Contact:, Ashley Wiand, Phone: 610-832-9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9623
-
ASTM International Committee F41 on Unmanned Maritime Vehicle Systems will meet on Aug. 17, 2011, at the Walter E. Washington Convention Center in Washington, D.C. The meeting will take place in conjunction with the AUVSI Unmanned Systems North American 2011 Conference. The F41 executive subcommittee meeting will begin at 7:00 a.m. on Aug. 17. in room 149A. In addition, all interested parties are…
-
Wet blue and wet white are intermediate products used by tanneries that process natural hides and skins into leather. Natural fats and oils need to be largely removed from wet blue and wet white for leather processing to be done properly, but no standard had previously existed to evaluate the effectiveness of such removal. ASTM International Committee D31 on Leather has now developed such a…
-
ASTM International Committee F41 on Unmanned Undersea Vehicle Systems invites all interested parties to participate in a new task group, F41.90.01 on Unmanned Surface Vehicles. With the addition of this new task group, the name of Committee F41 will be changed to Unmanned Maritime Systems. Task Group F41.90.01 is seeking new members with expertise in unmanned surface vehicles to complement the…
-
ASTM International Committee D31 on Leather has decided to reactivate Subcommittee D31.05 on Upholstery. During a period of inactivity for several years, the subcommittee was combined with Subcommittee D31.04 on Apparel. However, the last two years have seen an increase in the level of participation from people involved in upholstery leather manufacturing, so the subcommittees have again been…
-
, New ASTM Committee to Develop Standards That Will Facilitate New System Designs and Industry Growth, ASTM International, one of the largest voluntary standards development organizations (SDOs) in the world, today announced the formation of ASTM Committee F41 on Unmanned Undersea Vehicle (UUV) Systems. This important standards initiative was driven by the cooperative efforts of the United States Navy and UUV industry stakeholders to facilitate new UUV system designs and enable next-generation…, Critical Role in Oceanographic Research, Commercial and Military Applications, UUVs have a notable history dating back to the early 1980s. Early systems built on their manned submersible predecessors and helped transform oceanographic research during the decade. Used by the academic community in notable deep-sea expeditions, such as the discovery and exploration of the wreck of the Titanic, UUVs have played a critical role in ocean surveying, environmental monitoring, and…, UUV Growth and Evolution: ASTM Standards Will Help Lead the Way, Todays UUV industry includes two classes of systems: remotely operated vehicles (ROVs), which are attached to a mother-ship by a long cable; and autonomous underwater vehicles (AUVs), which operate without a tether. To better meet the challenges of emerging applications, existing UUV systems must evolve with new technology. Specific areas of need include greater interoperability among…, Fast and Efficient Standards Development Through the ASTM Process, Led by the Association for Unmanned Vehicle Systems International (AUVSI), the premier trade association for the unmanned systems industry, UUV stakeholders selected ASTM International as the SDO best suited for the development of new international industry standards. With a proven consensus process and state-of-the-art standards development infrastructure, ASTM International was best positioned…, Public/Private Sector Collaboration under the ASTM Umbrella, ASTM Committee F41 is another example of the long-standing partnership between the public and private sectors in developing consensus standards under the ASTM International process. F41 brings together technical experts from the UUV industry, federal government, trade associations and academia to develop voluntary consensus standards pertaining to UUV design, safety and performance including…