Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard will provide a test method related to unfixed chrome concentrations in Wet Blue. The standard, soon to be published as D8451, was developed by ASTM’s committee on leather ( D31 ). According to ASTM International member Okey Abara, Wet Blue is an intermediate product used for processing natural hides. It is produced when a tanning agent chemically binds to the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, David Lee, tel +1.610.832.9681; dlee@astm.org Release #11463 ###, ,
-
ASTM International’s committee on leather ( D31 ) is developing a proposed standard that will help to assess the effect of various soling agents on leather. The primary aim of the proposed standard ( WK74216 ) is to assess the degree of resistance and cleanability of a leather surface after it has been in contact with potential staining agents. Among the effects covered in the standard are…, Media Inquiries: , Dan Bergels, tel +1.610.832.9602; dbergels@astm.org , Committee Contact:, David Lee, tel +1.610.832.9681; dlee@astm.org Release #11097 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
A new ASTM International standard will be used to determine the alkalinity of oils used to soften the stuffing of leather products. ASTM’s leather committee (D31) developed the standard, which will soon be published as D8284. Total alkalinity is a chemical measurement of water’s ability to resist change in pH, also known as water buffering capacity. According to ASTM International member…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact: , David Lee, tel +1.610.832.9681; dlee@astm.org Release #10879
-
A new standard developed by ASTM International’s leather committee (D31) provides test methods to estimate its longevity. This new test method (soon to be published as D8137) provides a way to evaluate longevity considering everyday atmospheric conditions like smog and corrosive gases. ASTM International member Kadir Donmez, associate director of the leather research laboratory at the…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, David Lee, tel +1.610.832.9681; dlee@astm.org Release #10582
-
Activated carbon is processed to have small, low-volume pores that increase the surface area available for adsorption. It has applications in the medical, environmental and energy realms, among others. Since 1962, ASTM International Committee D28 on Activated Carbon has developed standards that play a pre-eminent role in how activated carbon is used. A D28 subcommittee, D28.02 on Liquid Phase…, WK47401, Xylenol Orange Dye, The xylenol orange dye test is a way to determine the relative adsorption rate of unused or reactivated carbons by adsorption of xylenol orange from aqueous solution. This is an important means for deciding which type of activated carbon to use to a specific water treatment application. “Activated carbon performance can roughly be defined as a combination of the ability to adsorb a particular…, WK47421, Particle Size Distribution, Mercury flue gas, home water filters and potable water treatment are the main applications in which powdered and fine mesh carbons are used. A proposed new test method will describe how a laser light scattering technique can determine the particle size distribution of fine mesh activated carbon. ASTM member Neal Megonnell, vice president, sales and marketing, Haycarb USA, says the proposed test…, ASTM Committee D28 Next Meeting:, April 27, April Committee Week, Anaheim, Calif., Technical Contact:, (WK47401) Adam Redding, Ph.D., Evoqua Water Technologies LLC, Northwest, Pa., tel +1.724.719.0805; adam.redding@evoqua.com and (WK47421) Neal E. Megonnell, Haycarb USA, Pittsburgh, Pa., tel +1.412.709.7487; neal@haycarbusa.com, ASTM Staff Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9731
-
If a leather article such as a shoe or a glove were left next to a heater for an extended period of time, would the finish remain soft and flexible or would it change color and develop cracks within the leather finish? A new ASTM International standard will help to answer that question, giving manufacturers a clear method to predict and prevent such problems. ASTM D7912 , Test Method for…, Technical Contact:, Kadir Donmez, Leather Research Laboratory, University of Cincinnati, Cincinnati, Ohio, Phone: 513-242-6300; donmezk@uc.edu, ASTM Staff Contact:, Ashley Wiand, Phone: 610-832-9551; awiand@astm.org, ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9623
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375
-
Slats inserted into chain link fences can provide up to 95 percent more privacy and enhance the aesthetic appeal of a fence. A proposed new ASTM International specification will answer the need for better standardization of these privacy slats. ASTM WK36470 , Specification for Privacy Slats for Chain Link Fence, is being developed by Subcommittee F14.40 on Chain Link Fence and Wire Accessories ,…
-
ASTM International Committee F14 on Fences welcomes participation in the development of a proposed new standard, ASTM WK36054 , Guide for Anchoring Steel Fence and Gate Posts in Lieu of Concrete Footings. The proposed standard is under the jurisdiction of Subcommittee F14.15 on Other Fence Systems and Components . According to Ray Statz, chairman, Qual Line Fence Corp., and chairman of F14.15,…