Search
Advanced search
Filter by category
Filter by committee
Search results
-
A new ASTM International standard will be helpful to those designing thermal insulation systems for cryogenic piping and equipment for liquefied natural gas (LNG)-fueled ship applications. ASTM’s committee on ships and marine technology ( F25 ) developed the new standard. “Correctly specifying the thermal insulation system for pipe and equipment on LNG-fueled ships is challenging,” says ASTM…, Media Inquiries:, Jaime Martorana, tel +1.610.832.9796; jmartorana@astm.org, Committee Contact:, David Lee, tel +1.610.832.9681; dlee@astm.org Release #11140 ###
-
A new standard from ASTM International’s ships and marine technology committee (F25) is designed to assist and support the maritime industry in addressing cyber risks by leveraging existing safety management systems (SMS). The new standard (soon to be published as F3449) would include guidelines to improve cyber safety, address vulnerability, recommend and outline training, and raise knowledge…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, David Lee, tel +1.610.832.9681, dlee@astm.org Release #11057 ###
-
A proposed ASTM International standard will support the effective operation, maintenance, and health of shipboard marine sanitation devices (MSDs). ASTM’s ships and marine technology committee (F25) is developing the proposed standard (WK73063). According to ASTM International member Todd Ripley, the proposed guide will provide information and clarity to support the health and maintenance of…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, David Lee, tel +1.610.832.9681; dlee@astm.org Release #11038 ###
-
In light of COVID-19 (coronavirus) and growing safety concerns for members and staff, ASTM International announced today that previously scheduled April standards development meetings in Boston (March 29-April 3) and Prague (April 27-30) have been canceled. The decision was based on several factors, including, but not limited to: Continued review of information and recommendations from the U.S.…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org Release #10993
-
A new ASTM International standard provides guidelines for using lithium-ion batteries on ships. The organization’s ships and marine technology committee ( F25 ) developed the standard ( F3353 ). ASTM International member Thane Gilman notes that the new standard was created primarily to support large lithium-ion battery installations, including those that may provide propulsion, ship’s service…, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Committee Contact:, David Lee, tel +1.610.832.9681; dlee@astm.org Release #10766
-
ASTM International’s committee on ships and marine technology ( F25 ) has approved the first standard for vessels designed to accommodate construction crews working on offshore projects. The new standard aims to address the wide range of quality and safety of such vessels. “Developing offshore energy and putting new assets into service requires accommodating many construction workers in the…, ASTM Committee F25 on Ships and Marine Technology Next Meeting:, June 14-15, 2017, June Committee Week, Toronto, Ontario, Canada, Media Inquiries:, Dan Bergels, tel +1.610.832.9602; dbergels@astm.org, Technical Contact:, Charles Rawson, Office of Design and Engineering Standards, U.S. Coast Guard, Washington, D.C., tel +1.202.372.1390; charles.e.rawson@uscg.mil, ASTM Staff Contact:, Robert Morgan, tel +1.610.832.9732; rmorgan@astm.org R elease #10324
-
Activated carbon is processed to have small, low-volume pores that increase the surface area available for adsorption. It has applications in the medical, environmental and energy realms, among others. Since 1962, ASTM International Committee D28 on Activated Carbon has developed standards that play a pre-eminent role in how activated carbon is used. A D28 subcommittee, D28.02 on Liquid Phase…, WK47401, Xylenol Orange Dye, The xylenol orange dye test is a way to determine the relative adsorption rate of unused or reactivated carbons by adsorption of xylenol orange from aqueous solution. This is an important means for deciding which type of activated carbon to use to a specific water treatment application. “Activated carbon performance can roughly be defined as a combination of the ability to adsorb a particular…, WK47421, Particle Size Distribution, Mercury flue gas, home water filters and potable water treatment are the main applications in which powdered and fine mesh carbons are used. A proposed new test method will describe how a laser light scattering technique can determine the particle size distribution of fine mesh activated carbon. ASTM member Neal Megonnell, vice president, sales and marketing, Haycarb USA, says the proposed test…, ASTM Committee D28 Next Meeting:, April 27, April Committee Week, Anaheim, Calif., Technical Contact:, (WK47401) Adam Redding, Ph.D., Evoqua Water Technologies LLC, Northwest, Pa., tel +1.724.719.0805; adam.redding@evoqua.com and (WK47421) Neal E. Megonnell, Haycarb USA, Pittsburgh, Pa., tel +1.412.709.7487; neal@haycarbusa.com, ASTM Staff Contact:, Kelly Paul, tel +1.610.832.9745; kpaul@astm.org, ASTM PR Contact:, Barbara Schindler, tel +1.610.832.9603; bschindl@astm.org Release #9731
-
The International Maritime Organization’s Fire Test Procedures Code provides test procedures for cable transits to allow for penetration through A-Class divisions, namely bulkheads and decks. However, there are many firestop penetration devices for cables and other installation methods that do not conform to the examples provided in the IMO FTP Code. Testing for these devices falls to the…, ASTM Committee F25 Next Meeting:, Dec. 10-12, 2013, December Committee Week, Jacksonville, Fla., Technical Contact:, Juan Manuel Flores, P.E., Intertek Commercial and Electrical, Elmendorf, Texas, Phone: 210-635-8100; juan.flores@intertek.com , ASTM Staff Contact:, Robert Morgan, Phone: 610-832-9732; rmorgan@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9508
-
ASTM Fence Committee Approves New Standards on Ornamental Aluminum Fencing and Polymer Privacy SlatsASTM International Committee F14 on Fences has recently approved two new standards: ASTM F2957 , Specification for Ornamental Aluminum Fence Systems; and ASTM F3000/F3000M , Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats., Ornamental Aluminum Fence Systems, ASTM F2957 was developed by Subcommittee F14.35 on Architectural Metal Fence Systems. The new standard defines minimum selection criteria and test procedures to ensure product users that an ornamental aluminum fence system has sufficient strength to withstand reasonable loads and forces, and has the appropriate combination of material and organic coating surface protection to withstand effects of…, Polymer Privacy Insert Slats, ASTM F3000/F3000M is under the jurisdiction of Subcommittee F14.40 on Chain Link Fence and Wire Accessories . ASTM F3000/F3000M covers both inserted slats that are placed into chain link fabric after the fence has been installed as well as slats that are pre-inserted into chain link mesh during the link weaving process. According to William Ullrich, principal, Link Consulting LLC, and an F14…, ASTM Committee F14 Next Meeting:, June 25, 2013, ASTM International Headquarters, West Conshohocken, Pa., Technical Contact:, (ASTM F2957) Larry Burkholder, Digger Specialties Inc., Bremen, Ind., Phone: 574-546-5999; lburkholder@diggerspecialties.com; (ASTM F3000/F3000M) William Ullrich, Link Consulting LLC, Annapolis, Md., Phone: 410-849-2610; bullrich.link@comcast.net , ASTM Staff Contact:, Thomas O’Toole, Phone: 610-832-9739; totoole@astm.org , ASTM PR Contact:, Barbara Schindler, Phone: 610-832-9603; bschindl@astm.org Release #9375
-
A new ASTM International standard covers the principal dimensions and materials of closed chocks, used for mooring, for installation on ships. The new standard, ASTM F2935 , Specification for Chocks, Ship Mooring, Cast Steel, has been developed by Subcommittee F25.01 on Structures , part of ASTM International Committee F25 on Ships and Marine Technology . Chocks are mounted directly on the deck,…